Replace Your Left Brake with a 5 x 5 Bolt Pattern with a Left Backing Plate
If you have a trailer with a bad left brake that needs to be replaced, this kit has what you will need. This kit fits standard 3500# axle, either Spring or Torsion, EZ lube or Standard. Click here for wire and installation instructions
Complete Trailer Brake Setup, with drums, seals, Bearings, Brake shoes, new hardware, backing plates, for one side of an axle!
for 3500# axles from Dexter, AL-KO, AXIS, Quality, and others!
Measurements from Center Bolt Hole to Center Bolt Hole is 2 7/8" on Backing Plate
This Kit Includes:
ONE- LEFT Brake backing plate, 3500# per pair, 10" x 2.25
ONE - New 10" brake drums, 5" bolt pattern with races already pressed in (click here for other bolt patterns sizes)
All hardware to attach backing plates to axle mount plate (special 7/16 nuts).
All brake hardware, springs, levers, magnets, shoes, etc.
New inner grease seals
All New Wheel Bearings (Shipping loose with kit):
ONE- 1.7" 10-19 seals
ONE- L44649 bearings
ONE- L68149 bearings
FIVE- Matching lug nuts, 1/2-20
ONE- New EZ Lube Dust Cap
If you have a 2.75" OD Tube and a Flange with 5 holes, (to bolt the brake plate to) your axle is the 7000# Axle
If you have a 2.25" axle tube and has a 4 bolt flange it is the 3500# axle.
If you have the smaller 1-5/8" axle tube and has the 4 bolt flange, it has the smaller 2000/2200# axle