1/2-Inch Bolt-On Steel D-Ring Tie-Down Anchor with Mounting Bracket
A durable, zinc-plated steel D-ring that creates a surface-mounted attachment point for tie-down straps and bungee cords on a trailer, truck bed or other flat mounting surface.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Product Type | Bolt-on D-ring tie-down anchor |
| Maximum Load | 11,700 lbs break strength |
| Working Load Limit | 4,000 lbs |
| Ring Diameter | 1/2 inch |
| Internal Ring Size | 2-3/8 inches wide × 2-1/2 inches tall |
| Overall Dimensions | 3-1/2 inches wide × 3-3/8 inches tall |
| Material / Finish | Zinc-plated steel |
Fitment / Application
| Category | Details |
|---|---|
| Application | Cargo-control attachment point for tie-down straps and bungee cords |
| Mounting Surface | Trailer, truck bed or another suitable flat surface |
| Mounting Style | Surface-mount, bolt-on installation |
| Cutout Required | No mounting-surface cutout required |
| Fitment Check | Verify the available mounting area and required load rating before ordering. |
| Hardware Note | Mounting hardware is not included. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| 4,000-LB WLL | Provides the stated working load limit for cargo-control applications. |
| 180° Rotation | Allows straps or bungee cords to be attached from multiple angles. |
| Surface-Mount Design | Installs without cutting a recessed opening in the mounting surface. |
| Zinc-Plated Steel | Resists corrosion while retaining strength through repeated use. |
Overview
This durable steel D-ring creates a solid cargo-control attachment point wherever a suitable flat mounting surface is available. The surface-mount design bolts into place without requiring a recessed hole in a trailer or truck bed. Its 1/2-inch zinc-plated steel ring rotates 180 degrees, providing access from multiple strap angles while resisting corrosion through repeated use.
R&P Service Insight
Confirm the mounting location and required load rating before installing any cargo-control anchor.
- Mounting Area: Verify that the available flat surface accommodates the D-ring’s 3-1/2-inch-wide × 3-3/8-inch-tall dimensions.
- Load Selection: Base cargo-control use on the stated 4,000-lb working load limit, not the 11,700-lb break-strength figure.
- Hardware Planning: Select mounting hardware separately because it is not included.
R&P Knowledge Hub
Compatibility: Designed for installation on a suitable flat mounting surface where the stated dimensions and load rating match the cargo-control application.
Trailer / Truck Fit: The bolt-on, surface-mount design can be used on a trailer or truck bed without cutting a recessed opening.
Installation Notes: Position the mounting bracket on a suitable flat surface and verify the mounting area before installation. Mounting hardware is not included.
Performance Insight: The rotating D-ring accepts tie-down straps or bungee cords from multiple angles, while the zinc-plated steel construction helps resist corrosion.
Brand & Fitment Note
Selling Brand: Not specified.
Product Configuration: Surface-mount steel D-ring with mounting bracket.
Application Reference: Intended to create an attachment point for tie-down straps and bungee cords on a suitable flat surface.
Before Ordering: Verify the overall dimensions, internal ring opening, ring diameter, mounting area and required working load limit for your application.
R&P Repair Insight
A correct fit depends on matching the anchor’s dimensions, surface-mount design and load rating to the intended cargo-control setup.
- Check the Opening: Confirm that the 2-3/8-inch-wide × 2-1/2-inch-tall internal ring opening works with the intended strap or bungee cord.
- Check the Space: Confirm that the selected flat surface has room for the 3-1/2-inch-wide × 3-3/8-inch-tall assembly.
- Check the Rating: Verify that the 4,000-lb working load limit is appropriate for the intended cargo-control application.
Features
Solid Cargo-Control Point
Creates an attachment point for securing cargo with tie-down straps or bungee cords.
No Recessed Cutout Required
The surface-mount design bolts onto a flat surface without requiring a hole to be cut into a trailer or truck bed.
180-Degree Rotating Ring
The D-ring rotates through 180 degrees so straps can be connected from multiple angles.
Zinc-Plated Steel Construction
The zinc-plated steel design resists corrosion and retains its strength through repeated use.
4,000-LB Working Load Limit
Provides a stated working load limit of 4,000 lbs with an 11,700-lb maximum break strength.
Simple Bolt-On Installation
Designed for straightforward installation on a suitable flat mounting surface.
Included Components
| Quantity | Item |
|---|---|
| 1 | Steel D-ring tie-down anchor |
| 1 | Mounting bracket |
| Not included | Mounting hardware |
