POWERED BY R&P CARRIAGES

LaVanture

30 Mylar Black Tape 1.25" x .188" - Truck Toppers, Body Side Rails, Trailers & RVs (TM125B)

$12.99
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: TM125B
PRODUCT INFORMATION

Product Details

Truck Topper / Trailer / RV Body Rail Tape

30' Mylar Black Tape 1.25" x .188" - Truck Toppers, Body Side Rails, Trailers & RVs

Black #30 Mylar tape for sealing, cushioning, vibration dampening, and sound deadening on compatible truck toppers, body side rails, trailers, RVs, and similar clean, dry light-duty substrates.

Part Number: TM125B 1.25" Wide x .188" Thick 30' Section

Key Measurements & Specs

Specification Detail
Part Number / SKU TM125B
Product Type #30 Mylar body rail / sealing tape
Color Black
Width 1.25"
Thickness .188" / approximately 3/16"
Length Included 30' section
Material Durable polyvinyl chloride (PVC) with polyester film backing
Adhesive Standard G1 emulsion acrylic adhesive

Fitment / Application

Category Details
Common Applications Truck toppers, body side rails, trailers, RVs, and similar sealing or cushioning applications
Primary Fit Use where 1.25" wide x .188" thick tape is required
Surface Requirement Best applied to clean, dry, light-duty substrates
Fitment Method Verify tape width, thickness, length requirement, surface condition, and compression area before ordering
Important Note Application fit depends on the surface, required seal thickness, and compression area. Verify before installation.

Top Features

Feature Buyer Benefit
PVC Construction Formulated for durable service life in sealing and cushioning applications
Compressible Seal Helps seal out air, condensation, light, and dust when properly compressed
Vibration Dampening Provides cushioning, vibration dampening, and sound deadening between contact surfaces
Flexible Application Conforms to irregular surfaces and curves when applied to a suitable clean, dry surface

Overview

This listing is for one 30' section of black #30 Mylar tape, part number TM125B. The tape measures 1.25" wide x .188" thick and is commonly used on truck toppers, body side rails, trailers, RVs, and similar applications where a compressible sealing, cushioning, or dampening strip is needed.

R&P Service Insight

Before installing body rail tape, confirm that the surface is clean, dry, and free of loose debris, old adhesive, wax, oil, or moisture. Proper prep helps the adhesive bond and allows the tape to compress evenly.

  • Measure First: Confirm that 1.25" width and .188" / 3/16" thickness match the gap or rail surface you are sealing.
  • Surface Prep: Clean and dry the application area before installing the tape.
  • Compression Fit: This tape is designed to seal when compressed between compatible surfaces.

R&P Knowledge Hub

Compatibility: Compatible with applications requiring black 1.25" wide x .188" thick body rail, topper, trailer, or RV sealing tape. Verify measurements before ordering.

Vehicle / System Fit: Commonly used for truck toppers, body side rails, trailer body contact points, RV applications, and general cushioning or sealing use where the tape dimensions match.

Installation Notes: Apply to clean, dry surfaces. Confirm that the tape can compress properly without bunching, folding, or interfering with panel fit.

Performance Insight: The PVC body and polyester film backing provide dimensional stability, while the adhesive backing supports light-duty bonding to suitable prepared surfaces.

Brand & Fitment Note

Selling Brand: R&P Carriages

Application Reference: Truck topper, body side rail, trailer, and RV references describe common application types only.

What This Means: This listing is for one 30' section of black #30 Mylar tape, part number TM125B. It is not listed as a vehicle-specific OEM-branded item.

Before Ordering: Verify tape width, thickness, length requirement, surface material, surface condition, and compression fit before installation.

R&P Repair Insight

When replacing old body rail or topper tape, remove worn material completely before installing the new section. Uneven old adhesive or dirt can reduce contact and prevent the new tape from sealing evenly.

  • Check Old Tape Size: Match the existing tape width and compressed thickness before replacing.
  • Check Rail Contact: Make sure the rail or mounting surface contacts the tape evenly across the full length.
  • Check Environment: Avoid installing over moisture, dust, grease, oil, or loose paint.

Features

Durable PVC Construction

Formulated from durable polyvinyl chloride for long service life in compatible sealing and cushioning applications.

Seals When Compressed

Helps seal out air, condensation, light, and dust when compressed between properly prepared contact surfaces.

Cushioning & Sound Dampening

Provides cushioning, vibration dampening, and sound deadening between topper rails, body surfaces, trailer surfaces, and similar contact points.

Dimensional Stability

Cast onto a 2 mil polyester film to provide dimensional stability and supplied as a self-wound product.

G1 Acrylic Adhesive

Uses standard G1 emulsion acrylic adhesive for light-duty substrates that are clean and dry.

Flexible Surface Conformity

Conforms to irregular surfaces and curves, helping support a better fit across compatible application areas.

Resistant Material Properties

Inherently resistant to fire, ultraviolet rays, most chemicals, acids, and solvents.

30' Working Length

Includes one 30' section for topper rails, body side rails, trailer, RV, and general body sealing applications where the dimensions match.

Included Components

Quantity Item
1 30' section of black #30 Mylar tape, 1.25" wide x .188" thick
Not Included Installation tools, cleaners, primers, hardware, or additional adhesive products
Important Fitment Note: Verify all tape measurements, surface condition, compression area, required length, and application requirements before installation. This tape is intended for compatible clean, dry light-duty substrates where the listed width and thickness match the application.
TM125B #30 Mylar black tape 1.25 inch x .188 inch x 30 foot body rail tape truck topper tape trailer tape RV sealing tape body side rail tape black PVC mylar tape 3/16 thick topper rail seal cushioning tape vibration dampening tape sound deadening tape

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.