Complete Trailer Brake Setup, with drums, seals, Bearings, Brake shoes, new hardware, backing plates, for one axle!
for 3500# axles from Dexter, AL-KO, AXIS, Quality, and others!
If you have a trailer without brakes, and you want to add them, this kit has what you will need. This kit fits standard 3500# axle, either Spring or Torsion, EZ lube or Standard.
Most 5 bolt wheel trailers are 3500# axles. (does yours have a 2-3/8" axle tube?)
Some small trailers (usually with small tires and a 1-5/8" axle tube) will have the smaller spindles, and for those you will need a smaller (or larger) brake kit Look at the measurements below if you are not sure.
Measurements from Center Bolt Hole to Center Bolt Hole is 2 7/8" on Backing Plate
This Kit Includes:TWO - New 10" brake drums, 5.5" bolt pattern with Races already pressed in
All hardware to attach backing plates to axle mount plate (special 7/16 nuts).
All brake hardware, springs, levers, magnets, shoes, etc.
New inner grease seals
All New Wheel Bearings (Shipping loose with kit):
TWO - 1.7" 10-19 seals
TWO - L44649 bearings
TWO - L68149 bearings
TEN - Matching lug nuts, 1/2-20
TWO - New EZ Lube Dust Caps
In addition, you should see a small square plate welded to the axle tube, with 4 holes, (to bolt the brake plate to) and your axle tube will be about 2 1/4" OD. If you have a 2.75" axle tube, it is the larger 5200, 6000, or 7000# axle, and if you have the smaller 1-5/8" axle tube, it has the smaller 2000/2200# axle
This auction is for a trailer with a 5 bolt, 5.5" bolt pattern! I stock all sizes, so please check my other auctions or specify you want a different size!
Note: We offer two different types of brake kits. Basic Kits & Complete Kits
Complete Kits are for adding brakes for the first time
Basic Kits are for adding brakes to a second axle or replacing them.
Make sure you double check that you are ordering the right bolt pattern before you pay
You might also like
