a Left 10" Self Adjusting Backing Plate
Common large GM Bolt pattern (5 on 5")
(stud Spacing 4-3/4")
If you have a trailer with a bad Left brake that needs to be replaced, this kit has what you will need. This kit fits standard 3500# axle, either Spring or Torsion, EZ lube or Standard.
Complete Trailer Brake Setup, with drums, seals, Bearings, Brake shoes, new hardware, backing plates, for left side of axle!
3500# axles from Dexter, AL-KO, AXIS, Quality, and others!
Most 5 bolt wheel trailers are 3500# axles. (does yours have a 2-3/8" axle tube?) Some small trailers (usually with small tires and a 1-5/8" axle tube) will have the smaller spindles, and for those you will need a smaller (or larger) brake kit
Measurements from Center Bolt Hole to Center Bolt Hole is 2 7/8" on Backing PlateThis Kit Includes:
ONE - New 10" brake drum, 5" bolt pattern with races already pressed in
All hardware to attach backing plates to axle mount plate (special 7/16 nuts).
All brake hardware, springs, levers, magnets, shoes, etc.
New inner grease seals
All New Wheel Bearings (Shipping loose with kit):
ONE- 1.7" 10-19 seal
ONE- L44649 bearing
ONE- L68149 bearing
FIVE- Matching lug nuts, 1/2-20
ONE- New EZ Lube Dust Cap
If you have a 2.75" OD Tube and a Flange with 5 holes, (to bolt the brake plate to) your axle is the 7000# Axle
If you have a 2.25" axle tube and has a 4 bolt flange it is the 3500# axle.
If you have the smaller 1-5/8" axle tube and has the 4 bolt flange, it has the smaller 2000/2200# axle
This auction is for a trailer with a 5 bolt, 5" bolt pattern! I stock all sizes, so please check my other auctions or specify you want a different size!