Complete Trailer Brake/Hub Drum Setup,
with drum bearings and seals, Brake shoes, new hardware, backing plates,
EVERYTHING for one wheel!
for 5200#, 6000# and 7000# axles!
Bolt on pattern Common is 1/2-20 lugs, 8 on 6 1/2" (8x6.5")
Over the years, we have worked on THOUSANDS of trailers and have seen lots of failed wheel bearings that take out the drum AND the brakes. Another problem is brakes that have worn the drum, either where the shoes ride, or more often, where the magnet rubs. New magnets will not "grab" strong on grooved drums! This is ALL PARTS you will need for one side of a 8 lug 6000# or 7000# axle . We almost always replace the entire assembly, it saves times, and when you are done, your brakes WORK again!
We dont just sell them, we install them every day!
If you have questions, just ASK, or give us a call 815-357-****
ONE complete brake drum and hub assembly, includes all new bearings, Seal, Dust cap, for one wheel.
You will need TWO for both sides of an axle.
Includes 12x2 brake drum, new
#14125A Outer Bearing (1.25" ID)
Inner bearing 25580 (1.75 ID)
Dust Cap, 2.72" OD, with EZ Lube removable plug (works with All Axles types!)
and two GREASE seal #10-36 (2.25" ID) And one 2.125" ID Seal (your axle could use either one, so we send BOTH!)
8 Lug nuts, 1/2-20, 13/16 wrench size
New brake shoes, 12" x 2"
New Magnet
All new Springs and hardware
All assembled on a new backing plate
We can get this drum in oil bath at a extra cost. This ad is for GREASE type lubrication.
This is for [1] LEFT side Assembly
One complete brake assemble, everything you need to replace the complete hub drum and all parts, assembled and ready to bolt on!
Fits #42 Spindle, See chart below (lines 7 and 8)
