Eight Drive-In Trailer Hub Studs w/ Nuts – 9/16-18 x 2-5/16 – Fits 5200–7000 lb Dexter Axles
Eight-piece drive-in trailer wheel stud and lug nut kit for compatible trailer hub applications. Built for buyers replacing damaged, worn, or missing hub studs where the thread size, length, spline, and press-fit dimensions match.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | 71328-KIT |
| Product Type | Drive-in trailer wheel stud and lug nut kit |
| Thread Size | 9/16"-18 |
| Overall Length | 2-5/16" |
| Spline / Knurl Diameter | 0.689" |
| Quantity Included | 8 studs and 8 matching lug nuts |
Fitment / Application
| Category | Details |
|---|---|
| System | Trailer hub wheel stud replacement |
| Typical Axle Range | Commonly used on compatible 5,200 lb, 6,000 lb, and 7,000 lb trailer hub applications |
| Fitment Method | Match thread size, overall length, spline / knurl diameter, base diameter, and hub bore dimensions |
| Important Note | Verify before ordering. This is a measurement-based hub hardware item and is not hub-specific. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| Drive-In Design | Designed to press into compatible trailer hub stud holes. |
| 9/16"-18 Thread | Matches common heavy-duty trailer hub and wheel hardware applications. |
| Studs with Nuts | Includes both the replacement wheel studs and matching lug nuts. |
| 8-Piece Hub Service Kit | Services two 4-stud hubs or provides eight individual replacements where dimensions match. |
Overview
This 71328-KIT includes eight drive-in trailer wheel studs and eight matching lug nuts for compatible trailer hub applications using 9/16"-18 wheel hardware. It is intended for measurement-matched hub repair where the existing stud length, spline / knurl diameter, and press-fit dimensions match the replacement hardware.
R&P Service Insight
Wheel studs are small parts, but the measurements matter. A stud can have the correct thread size and still be wrong if the knurl diameter, shoulder, or installed length does not match the hub.
- Press Fit: Drive-in studs should be installed squarely into a compatible hub bore.
- Measurement Check: Match thread size, overall length, spline / knurl diameter, and base dimensions before ordering.
- Hub Condition: If the hub stud hole is wallowed out, damaged, or loose, replacing the stud alone may not solve the issue.
R&P Knowledge Hub
Compatibility: This kit is for compatible trailer hubs using 9/16"-18 drive-in wheel studs. Fitment is determined by measurements, not axle rating alone.
Trailer / Hub Fit: Commonly used on compatible 5,200 lb, 6,000 lb, and 7,000 lb trailer axle hub applications where stud dimensions match.
Installation Notes: Press the studs into the hub evenly. Do not rely on the lug nut alone to pull an incorrect or oversized stud into place.
Performance Insight: Proper stud fit helps maintain wheel clamping force and prevents stud movement in the hub during service.
Brand & Fitment Note
Selling Brand: R&P Carriages curated trailer hub hardware kit.
Application Reference: Dexter-style or OEM-style hub references are used only as application guidance where the buyer’s measurements match.
What This Means: This listing is for a wheel stud and lug nut service kit, not a guaranteed OEM-branded hub-specific kit unless otherwise verified on the product packaging or listing record.
Before Ordering: Verify thread size, overall length, spline / knurl diameter, shoulder, base diameter, hub condition, and included components before installation.
R&P Repair Insight
For trailer hub stud repair, the most common ordering mistake is matching only the thread size. Confirm the complete stud profile before replacing hardware.
- Check Thread: Confirm 9/16"-18 thread matches your existing lug nuts and wheel hardware.
- Check Spline: Confirm the spline / knurl diameter matches the hub bore so the stud seats tightly.
- Check Length: Confirm 2-5/16" overall length provides proper wheel and lug nut engagement for your hub and wheel combination.
Features
Drive-In Wheel Stud Design
Made for press-fit installation into compatible trailer hubs using matching drive-in style studs.
9/16"-18 Thread Size
Common heavy-duty trailer wheel hardware thread size used across many compatible hub applications.
Eight Studs with Nuts
Includes eight replacement studs and eight matching lug nuts for a complete service kit.
Measurement-Based Fitment
Useful for hub repair when the buyer confirms length, spline / knurl diameter, and thread size against the original hardware.
Included Components
| Quantity | Item |
|---|---|
| 8 | Drive-in trailer wheel studs, 9/16"-18 x 2-5/16" |
| 8 | Matching lug nuts |
| Not Included | Hub, drum, wheel, bearings, seals, races, washers, or additional installation hardware |
