Eight - 1/2"-20 Hex Wheel Trailer Lug Nuts – 60° Coned Seat – 1/2"- 20 Thread, 13/16" Hex
Steel trailer wheel lug nuts with a 1/2"-20 thread, 13/16" hex, zinc-plated finish, and 60° conical seat for compatible trailer wheels, hubs, and brake drums.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | X1023R-LOTOF8 |
| Product Type | Hex Wheel Lug Nut |
| Thread Size | 1/2"-20 |
| Hex Size | 13/16" |
| Seat Type | 60° Conical / Tapered Seat |
| Material / Finish | Steel / Zinc-Plated |
| Quantity Included | 8 Lug Nuts |
Fitment / Application
| Category | Details |
|---|---|
| System | Trailer wheel, hub, and brake drum hardware |
| Primary Fit | Compatible applications using 1/2"-20 wheel studs and 60° conical-seat wheels |
| Common Use | Many 5-lug trailer hubs and drums where thread size and seat style match |
| Fitment Method | Verify wheel stud thread size, hex size, and wheel seat style before ordering |
| Important Note | Not all trailer wheels use a conical seat. Match the existing lug nut style before installation. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| 1/2"-20 Thread | Fits compatible trailer wheel studs using the same thread size |
| 60° Conical Seat | Designed to center compatible trailer wheels during installation |
| 13/16" Hex | Works with common trailer wheel service sockets |
| Set of 8 | Useful for replacement, service work, or keeping spare wheel hardware on hand |
Overview
This set of 1/2"-20 hex wheel lug nuts is designed for trailer wheels and hubs that require a standard 60° conical / tapered seat. These lug nuts are commonly used on compatible 5-lug trailer hubs and brake drums equipped with 1/2"-20 wheel studs. This listing includes eight (8) lug nuts.
R&P Service Insight
Lug nuts should always be matched by thread size, seat style, and hex size. A lug nut may thread onto the stud but still be incorrect if the wheel seat style does not match.
- Thread Check: Confirm the wheel studs are 1/2"-20 before ordering.
- Seat Check: Use only with wheels requiring a 60° conical / tapered seat.
- Install Check: Torque lug nuts to the wheel, hub, or trailer manufacturer’s specification.
R&P Knowledge Hub
Compatibility: Compatible with trailer wheel applications using 1/2"-20 studs and 60° conical-seat wheels.
Vehicle / System Fit: Trailer wheel, hub, and brake drum hardware where the thread size, seat type, and hex size match the existing setup.
Installation Notes: Start lug nuts by hand to avoid cross-threading. Tighten in the correct star pattern where applicable, then torque to the proper specification.
Performance Insight: The 60° conical seat helps center compatible wheels against the hub face when properly installed.
Brand & Fitment Note
Selling Brand: R&P Carriages
Application Reference: Trailer wheel hardware applications are based on matching thread size, seat style, and wheel compatibility.
What This Means: This listing is for a set of eight (8) 1/2"-20 trailer wheel lug nuts, not a guaranteed OEM-branded item unless separately stated.
Before Ordering: Verify thread size, wheel seat style, hex size, and quantity needed before installation.
R&P Repair Insight
Trailer lug nuts are small parts, but incorrect selection can create wheel seating problems. The most important checks are stud thread, wheel seat profile, and correct torque.
- Do Not Mix Seat Styles: Conical-seat lug nuts should not be used on wheels requiring a different seat design.
- Inspect Studs: Replace damaged, stretched, or cross-threaded wheel studs before installing new lug nuts.
- Recheck Torque: Wheel hardware should be rechecked after initial installation according to trailer or wheel manufacturer guidance.
Features
1/2"-20 Trailer Wheel Thread
Designed for compatible trailer hubs and brake drums equipped with 1/2"-20 wheel studs.
60° Conical Seat
Matches compatible tapered-seat trailer wheels and helps center the wheel when properly torqued.
Zinc-Plated Steel
Steel construction with a zinc-plated finish for corrosion resistance in typical trailer service conditions.
Convenient Set of 8
Includes eight lug nuts for replacement, maintenance, or spare wheel hardware needs.
Included Components
| Quantity | Item |
|---|---|
| 8 | 1/2"-20 Hex Wheel Lug Nuts with 60° Conical Seat |
