7.25" Polished Aluminum Round Air Trailer Wall Vent — Butterfly Style
Polished aluminum round air wall vent designed for passive airflow on horse trailers, RVs, cargo trailers, and utility trailer wall applications. The butterfly-style internal flap helps control airflow while limiting direct rain and debris intrusion.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | 775 |
| Product Type | Round air wall vent |
| Vent Diameter | 7.25" |
| Material / Finish | Polished aluminum |
| Vent Style | Butterfly-style internal flap |
| Quantity Included | 1 vent |
Fitment / Application
| Category | Details |
|---|---|
| Trailer / System | Trailer, RV, cargo trailer, utility trailer, and horse trailer wall ventilation |
| Primary Fit | Verify before ordering by matching vent diameter, cutout size, and wall mounting requirements |
| Mounting Location | Trailer or RV wall |
| Fitment Method | Measurement-based fitment; confirm existing opening and mounting style before installation |
| Important Note | Hardware, gasket, sealant, and cutout template are not listed as included. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| Round Wall Vent | Designed to add passive ventilation to trailer and RV wall panels. |
| Butterfly Style | Internal flap helps manage airflow while reducing direct exposure through the vent opening. |
| Polished Aluminum | Clean exterior finish suitable for visible trailer wall applications. |
| Horse Trailer Use | Commonly used where additional airflow is needed in enclosed trailer bodies. |
Overview
This 7.25" polished aluminum round air wall vent is designed for trailer and RV wall ventilation. The butterfly-style internal flap allows passive airflow while helping limit rain, road debris, and direct intrusion through the vent opening. It is a practical replacement or add-on ventilation component for horse trailers, cargo trailers, utility trailers, and RV wall applications where the measurements match.
R&P Service Insight
Before replacing or adding a wall vent, match the physical vent size and wall opening carefully. Trailer wall vents often depend on the existing cutout, wall thickness, and fastener pattern rather than vehicle year or model.
- Measure First: Confirm the existing vent diameter and the required wall cutout before ordering.
- Seal Properly: Use appropriate exterior-grade sealing practices during installation to help prevent water intrusion.
- Check Clearance: Make sure the butterfly flap can open and close without obstruction inside the trailer wall area.
R&P Knowledge Hub
Compatibility: Compatible with trailer and RV wall applications where the 7.25" vent diameter, cutout, and mounting requirements match. Verify before ordering.
Vehicle / System Fit: Commonly used on horse trailers, cargo trailers, utility trailers, and RVs needing passive wall ventilation.
Installation Notes: Confirm wall thickness, opening diameter, mounting surface condition, and sealing requirements before installation.
Performance Insight: Passive wall vents help improve airflow in enclosed trailer bodies, especially where interior air movement is limited.
Brand & Fitment Note
Selling Brand: R&P Carriages
Application Reference: Trailer, RV, horse trailer, cargo trailer, and utility trailer references describe general application use only.
What This Means: This listing is for one 7.25" polished aluminum round butterfly-style wall vent. It is not listed as an OEM-branded item.
Before Ordering: Verify vent diameter, wall cutout, wall thickness, mounting method, fastener needs, and sealing requirements before installation.
R&P Repair Insight
When replacing a trailer wall vent, the most important fitment points are the opening size, mounting surface, and seal condition. If the old vent leaked or loosened, inspect the wall panel before installing the replacement.
- Cutout Check: Measure the opening instead of relying only on the outside face diameter.
- Surface Check: Clean old sealant, debris, and corrosion from the mounting area before installation.
- Water Check: Re-seal around the vent after installation using an appropriate exterior trailer/RV sealant.
Features
7.25" Round Vent
Designed as a round wall-mounted air vent for trailer and RV ventilation applications.
Butterfly-Style Airflow Control
Internal flap design allows airflow control while helping reduce direct rain and debris intrusion.
Polished Aluminum Finish
Polished aluminum construction gives the vent a clean appearance for exterior trailer wall use.
Trailer & RV Wall Use
Suitable for compatible horse trailer, cargo trailer, utility trailer, and RV wall installations.
Included Components
| Quantity | Item |
|---|---|
| 1 | 7.25" polished aluminum round butterfly-style air wall vent |
| Not Included | Mounting hardware, gasket, sealant, and installation template are not listed as included. |
