Products

Pair of Equalizers for 2" Wide Slipper Spring 13" Long 7/8" Center Hole W/Nuts & Bolts (EQ-13-REBUILD-KIT)

Two Equalizers for 2" Wide Slipper Springs 13" Long 7/8" Center HolePart Number: EQ-13-REBUILD-LN-KIT 13-1/8" Long equalizer connects slipper springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Fits springs with 9/16" diameter eye. Kit Includes: (2) 007-001-01: 7/8" Grease Bolt...

SKU EQ-13-REBUILD-LN-KIT Brand R & P Carriages

$68.18

● IN STOCK

Pair of Genuine Dexter Non EZ Lube 2.44" Dust Caps (021-001-00-PAIR)

Pair of Genuine Dexter Non EZ Lube 2.44" Dust Caps Part Number - 021-001-00-PAIR Lost your dust caps on your Dexter hubs? Just want to replace your dust caps? Here are GENUINE DEXTER dust caps. These caps are not EZ Lube, but they are solid DEXTER dust caps Genuine Dexter parts For 2.44" hubs No rubber insert to...

SKU 021-001-00-PAIR Brand Dexter

$7.99

● IN STOCK

Pair of J-90 Bargman 34-92-003 9x5 Red Stop Tail Turn Lamp Light Trailer Camper (J-90 + J-90-L)

Replacement lights for Jammy J-90, Bargman 34-92-003, 9"x 5" Stop Tail Turn Lamp White Base Red Incandescent Light 8 5/8" by 4 4/8" incandescent tail light. Bulbs Included, takes a common 1157 Bulb Stop, tail, turn signal capable. Snap off reflex lens, with white base. Wiring: 6" leads Screw mounting Lens color, Red. Left and Right...

SKU J-90 + J-90-L Brand Jammy

$22.04

● IN STOCK

PAIR of Maxxima 3/4" Round Clear Lens Amber Light With 3/4" Weld-On Light Bracket (M09300YCL-34-BRACKET-PAIR)

PAIR of Maxxima 3/4" Round Clear Lens Amber Light With 3/4" Weld-On Light BracketPart Number: M09300YCL-34-BRACKET-PAIR This kit contains: (X2) M09300YCL Maxxima 3/4" Round LED Clear lens Amber Light (X2) LB-34-BRACKET 3/4" Bullet Light Bracket Steel Weld-On Fits a 3/4" Round Light 2-1/2" Wide Overall 2-1/2" Long Overall 1/8" Thickness Our Location: R and P...

SKU M09300YCL-34-BRACKET-PAIR Brand Maxxima

$17.99 — Sold Out

UNAVAILABLE VIEW DETAILS

PAIR Of Maxxima 3/4" Round LED P2PC CM Amber With 3/4" Weld-On Light Bracket (M09300Y-34-BRACKET-PAIR)

PAIR Of Maxxima 3/4" Round LED P2PC CM Amber With 3/4" Weld-On Light BracketPart Number: M09300Y-34-BRACKET-PAIR This kit contains: (X2) M09300Y Maxxima 3/4" Round LED P2PC CM Amber (X2) LB-34-BRACKET 3/4" Bullet Light Bracket Steel Weld-On Fits a 3/4" Round Light 2-1/2" Wide Overall 2-1/2" Long Overall 1/8" Thickness Our Location: R and P Carriages270...

SKU M09300Y-34-BRACKET-PAIR Brand Maxxima

$17.99 — Sold Out

UNAVAILABLE VIEW DETAILS

Pair of Rear Slipper Spring Hangers 2" Wide - 3.47" Spring Height to Wear Plate - 6" Tall - 4" Long (HG-15854-R-LOTOF2)

Trailer Suspension / Pair of Rear Slipper Spring Hangers Pair of Rear Slipper Spring Hangers 2" Wide - 3.47" Spring Height to Wear Plate - 6" Tall - 4" Long - (HG-15854-R-LOTOF2) A matched pair of rear hangers for 2-inch-wide slipper spring trailer suspension setups. This HG-15854-R-LOTOF2 listing is built for buyers replacing both rear...

SKU HG-15854-R-LOTOF2 Brand R & P Carriages

$69.99

● IN STOCK

Pair of Rockwell Quality 12-1/4 x 3-1/2 Electric Brake 5 Hole Backing Plate 10K (4738-P)

Electric Trailer Brake Assembly Kit Pair – Rockwell 12-1/4" x 3-1/2" Electric Brake Assemblies – 5 Bolt Flange Complete left and right-hand electric brake assembly pair with cast backing plates for compatible Rockwell-style imported axle applications. Kit Number: 4738-P Includes 4738-R & 4738-L 12-1/4" x 3-1/2" Key Measurements & Specs Specification Detail Kit Number 4738-P...

SKU 4738-P Brand Rockwell

$397.99

● IN STOCK

Pair of Stainless Steel Wear Sleeve Ring W/Lube Hole UFP 5200 6000 Trailer Axle Grease Seal 2.125" OD 2.03" ID (33304U-2)

UFP Wear Sleeve with Lube Hole – 2.125" OD – 5200–6000 lb Axles – (2 Pack) Part Number: 33304U-2 Pair of replacement wear sleeves designed for UFP trailer axles. Used to restore the sealing surface on worn spindles in 5200–6000 lb axle applications. R&P Knowledge Hub These sleeves replace the original seal surface on UFP...

SKU 33304U-2 Brand Dexter

$15.99

● IN STOCK

Pair of Trailer Backing Plate Brakes Electric 12" Self Adjust 7000 Left Right (BK-12E-FSA-SET)

12" Electric Brake Backing Plates — LEFT & RIGHT Pair, Nev-R-Adjust (7K Axle) Part Number: BK-12E-FSA-SET Complete pair of 12" x 2" electric brake backing plates including one LEFT and one RIGHT assembly. Nev-R-Adjust style assemblies typically used on 7,000 lb trailer axles. Features Includes one LEFT and one RIGHT backing plate 12" x 2"...

SKU BK-12E-FSA-SET Brand R & P Carriages

$139.99

● IN STOCK

PAIR Of Weld-On Bullet steel 3/4" Marker Light Brackets For trailers (LB-34-PAIR)

PAIR Of Weld-On Bullet steel 3/4" Marker Light Bracket For trailers Part Number: LB-34-PAIR PAIR Of Weld-On Bullet steel Marker Light Bracket Fits 3/4" Light 2-1/2" Wide 2-1/2" Long 1/8" Thick Our Location: R and P Carriages270 E Jackson StreetSeneca, IL 61360 Our Hours are 9:00AM to 5:00PM, Central Standard Time, Monday through Friday, and...

SKU LB-34-PAIR Brand R & P Carriages

$12.99 — Sold Out

UNAVAILABLE VIEW DETAILS

Pair Oil Bath Hub Caps – 3.5" Thread, Dexter 9K–10K Trailer Axles (K71-704-00)

Oil Bath Hub Cap Pair for Dexter 9K–10K Trailer Axles (K71-704-00) Part Number: K71-704-00 Replacement oil bath hub cap kit designed for select Dexter oil-lubricated trailer hub and drum assemblies. This set is commonly used on later-production Dexter 9,000 lb and 10,000 lb axle systems requiring a large-thread oil bath cap. Features Oil bath style...

SKU K71-704-00 Brand R & P Carriages

$32.29

● IN STOCK

Pair Oil plug Center plug for hole in center of oil cap Replaces Dexter 046-032-00 Plug Fits 21-35 21-36 21-88 Caps(OC-Rubber Plug-LOTOF2)

Trailer Oil Bath Hub Cap / Center Plug R&P Carriages 2-Pack Rubber Oil Cap Center Plugs Fits 7/8" Hole Replacement rubber center plugs for compatible oil bath trailer hub caps using a 7/8" center opening. Fits Dexter-style applications using reference plug 046-032-00 and compatible cap references 21-35, 21-36, and 21-88 where measurements match. R&P P/N:...

SKU OC-Rubber Plug-LOTOF2 Brand Need A Trailer Part®

$2.99

● IN STOCK

Pair Ramp Spring for 1-1/2" Shaft 2k Torque Trailer Equipment Car Auto Implement (RS16933-PAIR)

Pair Hand Ramp Spring Specific for 1-1/2" Shaft, 2k Torque Part Number: RS16933-PAIRThis Listing Contains:1x RIGHT Ramp Spring for 1-1/2" Shaft1x LEFT Ramp Spring for 1-1/2" ShaftSpecs:Overall Length 11"Made for 1-1/2" Shaft Rod7 Coil 3-3/4" Width4" Long Tension Shaft2000# Torque Features:Steel AlloyRight and Left Hand Springs1-1/2" ShaftDurabilityEasy LiftingCommonly on Equipment, Car Haulers, or ImplementIf you have questions, please...

SKU RS16933-PAIR Brand R & P Carriages

$55.85

● IN STOCK

PAIR Replacement Ramp Spring for 1.5" Shaft Rod on Equipment Implement Trailer (8600089 + 91)

Pair of Replacement Springs for Mega Ramps – 1.5" Shaft Rod Part Number: 8600089 + 8600091 Replacement left and right springs designed for Mega Ramps and similar trailer ramp hinge assemblies that use a 1.50 inch diameter rod or shaft. These springs provide lift-assist tension to help raise, lower, and securely support heavy ramp gates...

SKU 8600089 + 91 Brand R and P Carriages

$65.20

● IN STOCK

Pair Smoke Tint Lens 6" Red LED Stop Turn Tail Light Grommet TecNiq Trailer Truck (T68-RTG0P-KITx2)

(2) 6" Oval Smoke Tint LED Stop / Turn / Tail Lights with Grommets – TecNiq Part Number: T66-RTG0P-1 Pair of 6" oval smoke tint LED Stop / Turn / Tail lights complete with mounting grommets. Designed using TecNiq’s advanced lens optics for consistent visibility and performance, suitable for heavy duty trucks, semi-trailers, cargo trailers,...

SKU T68-RTG0P-KITx2 Brand TecNiq

$31.21

● IN STOCK

Pair Steel 4" Tail Brake Light Guard Square Box Trailer Truck Over 80" Weld On (LB-4-LOTOF2)

One Pair (one left, and one right) Light Guards for 4" "Standard" trailer lights. Made from 12 Gauge Unpainted SteelUSA MadeMeasures 5 1/2" x 5 1/2" x 3 1/8" Guard has opening for "over 80" side light if you have them.Rear slots are spaced about 1 3/4" apart, to fit the standard 2" bolt spacing used...

SKU LB-4-LOTOF2 Brand Need A Trailer Part®

$24.07

● IN STOCK

Pair Trailer Backing Plate Brake Electric 10" Fits Dexter Nev-R-Adjust 3500 Self (BK-10E-FSA-SET)

2 – 10" x 2-1/4" Complete Electric Trailer Brake Backing Plates – Self Adjusting Part Number: BK-10E-FSA-SET (Replaces Dexter 023-468-00 & 023-469-00) Complete pair of 10" x 2-1/4" self-adjusting electric brake backing plates for standard 3,500 lb trailer axles. Both left-hand and right-hand assemblies are included. Simply remove your old 4-bolt backing plates and install...

SKU BK-10E-FSA-SET Brand Unbranded

$114.51

● IN STOCK

Pair Trailer Stop Turn Tail Lights – Jammy J-70 & J-70-L Box Style – Red Left & Right Set (J-70+J-70-L)

Pair Jammy J-70 & J-70-L Stop / Turn / Tail Trailer Lights – Left & Right Set Complete left and right pair of Jammy J-70 (Curb Side) and J-70-L (Street Side) red rectangular trailer lights. These universal box-style combination lamps provide reliable Stop, Turn, and Tail functions, with the left light including a license-plate window...

SKU J-70 + J-70-L Brand Jammy

$13.20

● IN STOCK

Pair Trailer Suspension Rebuilt Kit Slipper Spring 12" Equalizer Bushings Bolts (EQ-12-REBUILD-KIT)

Tandem Axle Slipper Spring Equalizer Rebuild Kit – 12" Equalizers (Pair) Part Number: EQ-12-REBUILD-KIT Suspension rebuild kit designed for tandem-axle trailers using slipper leaf springs and 12" center pivot equalizers. This kit includes equalizers, pivot hardware, shackle bolts, lock nuts, and replacement bushings for servicing worn suspension components. Features Rebuild kit for tandem-axle slipper spring...

SKU EQ-12-REBUILD-KIT Brand R & P Carriages

$95.38

● IN STOCK

Pair Trailer Suspension Rebuilt Kit Slipper Spring 12" Equalizer Bushings Bolts (EQ-12-REBUILD-LN-KIT)

Tandem Trailer Suspension Rebuild Kit – 12 in Equalizers, Slipper Springs Part Number: EQ-12-REBUILD-LN-KIT Tandem trailer suspension rebuild kit designed for trailers using 2 inch wide slipper-style leaf springs and 12 inch equalizers. This kit replaces common wear components to restore proper suspension articulation while retaining existing leaf springs. Listing is priced for a pair...

SKU EQ-12-REBUILD-LN-KIT Brand R & P Carriages

$98.99

● IN STOCK

PAIR TYC Dodge Pickup Truck Replacement Tail Lamp Lens & Housing for 1994-2002 Models11-3239/11-3240

Pair of TYC Dodge Pickup Truck Replacement Tail Lamp Lens and Housing for 1994-2002 Models Part Number: 11-3239+11-3240 This kit contains: 1x Passenger Side Lamp Lens and Housing (Right Side) 1x Driver Side Lamp Lens and Housing (Left Side) DOES NOT INCLUDE THE LIGHT BULBS OR THE FIXURES THE LIGHT BULBS PLUG INTO! Features: - OEM-...

SKU 11-3239+11-3240 Brand R and P Carriages

$29.92 — Sold Out

UNAVAILABLE VIEW DETAILS

Pair Weight Distribution Hitch Chain Hook-Up Brackets (W5DH)

Pair Weight Distribution Hitch Chain Hook-Up Brackets Part Number: W5DH Heavy-duty replacement bracket pair for most weight distribution and equalizer-style hitches. These brackets clamp directly to the trailer tongue and swing up or down to tension the spring bars or chains on your hitch system. Designed for secure attachment and simple, tool-free adjustment in the...

SKU W5DH Brand Need A Trailer Part®

$81.75

● IN STOCK

Pair Weld Bolt On Fold Down Telescopic Stabilizer Jack Motorcycle Trailer Camper (SJ100-LOTOF2)

Two (2) Fold Down Trailer Stabilizer Jacks Stabilizer Jack Pair Pair of fold-down, telescoping stabilizer jacks commonly installed on the rear of cargo trailers, motorcycle trailers, campers, and RVs. Designed to provide quick support and stabilization while parked. Allows safe entry into trailer while unhooked from the tow vehicle and helps prevent rear tipping. Can...

SKU SJ100-LOTOF2 Brand Unbranded

$64.36 — Sold Out

UNAVAILABLE VIEW DETAILS

Pair · 2000 lb Brake Spindles with Flange – Fits L44649 Bearings (SP-150BT16FZ-2)

Pair · 2,000 lb Brake Spindles with Flange – Fits L44649 Bearings Part Number: SP-150BT16FZ-2 This listing includes a pair (2) of 2,000 lb brake spindles designedfor light-duty trailer axles. These weld-on spindles feature an integrated4-bolt brake flange and are commonly used on utility trailers,small cargo trailers, boat trailers, PWC trailers, and similar applications. Each...

SKU SP-150BT16FZ-2 Brand Need A Trailer Part®

$87.97

● IN STOCK