Dexter 10K Disc Brake Trailer Hub 008-214-06 – 8 on 6.5" – 4.77" Pilot – Hub Only
Replacement 10,000 lb heavy-duty disc brake hub for compatible Dexter-style disc brake axle applications. This is a hub-only listing and does not include the brake rotor, bearings, seal, oil cap, or lug nuts.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | 008-214-06 |
| Brand / Application | Dexter 10K heavy-duty disc brake hub application |
| Product Type | Disc brake hub, hub only |
| Bolt Pattern | 8 on 6.5" |
| Pilot Diameter | 4.77" listed reference; verify pilot measurement before ordering |
| Wheel Studs | 5/8"-18 stud size reference |
| Stud Length | 2-1/4" listed reference; verify against existing hub |
| Rotor Reference | 070-006 / 070-006-01 disc brake rotor reference; rotor not included |
| Quantity Included | 1 hub |
Fitment / Application
| Category | Details |
|---|---|
| Axle System | 10,000 lb heavy-duty trailer disc brake axle applications |
| Primary Fit | Compatible Dexter-style 10K disc brake hubs where part number, pilot, bolt pattern, rotor, and bearing references match |
| Bearing References | Commonly referenced with 395S inner bearing and 387A outer bearing; bearings not included |
| Fitment Method | Match by part number, spindle dimensions, inner / outer bearing numbers, seal reference, wheel bolt pattern, pilot diameter, and rotor compatibility |
| Important Note | Disc brake hubs are not interchangeable with drum brake hubs. Verify before ordering. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| 10K Disc Brake Hub | Built for compatible heavy-duty trailer disc brake wheel-end applications |
| 8-Lug Pattern | Fits wheels using an 8 on 6.5" bolt pattern when all other specs match |
| Rotor-Compatible Design | Designed for use with separate disc brake rotor applications such as 070-006 / 070-006-01 references |
| Hub-Only Replacement | Useful when replacing the hub without buying a full rotor, bearing, seal, or cap kit |
Overview
This listing is for one Dexter 008-214-06 10K disc brake hub for compatible heavy-duty trailer disc brake axle systems. The hub uses an 8 on 6.5" wheel bolt pattern and a 4.77" pilot diameter listing reference. This is not a complete hub-and-rotor kit. The brake rotor, bearings, seal, oil cap, and lug nuts are sold separately unless otherwise shown.
R&P Service Insight
Heavy-duty disc brake hubs should be matched by measurements and component numbers, not axle capacity alone. A 10K axle rating is only one part of the fitment check.
- Match the Wheel End: Confirm inner bearing, outer bearing, seal, oil cap, pilot, and bolt pattern before installation.
- Rotor Check: This hub is intended for disc brake rotor use; confirm the rotor reference and mounting style before ordering.
- Not a Drum Hub: Disc brake and drum brake hubs use different configurations and should not be treated as interchangeable.
R&P Knowledge Hub
Compatibility: This hub is for compatible 10K heavy-duty disc brake axle applications where part number 008-214-06 and all hub specifications match.
System Fit: Designed for disc brake wheel-end service using a separate brake rotor. Rotor reference 070-006 / 070-006-01 should be verified against the axle and brake setup.
Installation Notes: Inspect the spindle, bearing journals, seal surface, oil cap threads, rotor mounting, and wheel studs before final assembly.
Performance Insight: Correct pilot diameter, bolt pattern, bearing set, and rotor compatibility are essential on high-capacity trailer wheel ends. Small measurement differences can cause fitment problems.
Brand & Fitment Note
Selling Brand / Application: Dexter 008-214-06 disc brake hub application.
Application Reference: Dexter, rotor, bearing, and axle references are used for fitment identification only. Always verify against the parts currently on the trailer.
What This Means: This listing is for one 10K disc brake hub, not a complete bearing kit, seal kit, cap kit, lug nut kit, or rotor assembly.
Before Ordering: Verify part number, hub pilot, wheel bolt pattern, stud size, stud length, rotor compatibility, bearing numbers, seal number, and included components.
R&P Repair Insight
When replacing a heavy-duty disc brake hub, compare the old hub directly to the new hub before packing bearings or adding oil. This helps catch incorrect pilot, rotor, bearing, or spindle matches before the trailer is reassembled.
- Bearing Check: Common bearing references include 395S inner and 387A outer; confirm your existing bearing numbers before ordering.
- Seal & Cap Check: Seal and oil cap references vary by axle setup. Do not assume they are included with this hub-only listing.
- Rotor Check: Confirm the rotor part number and mounting fit before installation. Rotor is sold separately.
Features
10K Disc Brake Hub Application
Replacement hub for compatible 10,000 lb heavy-duty trailer disc brake axle systems.
8 on 6.5" Wheel Pattern
Configured for 8-lug wheels using an 8 on 6.5" bolt circle when the rest of the wheel-end specifications match.
4.77" Pilot Reference
Uses a 4.77" pilot diameter listing reference. Verify pilot measurement before ordering or installation.
Rotor-Compatible Hub
Designed for disc brake rotor use with compatible rotor references such as 070-006 / 070-006-01. Rotor is not included.
Included Components
| Quantity | Item |
|---|---|
| 1 | 10K disc brake hub, part number 008-214-06 |
| Not Included | Brake rotor / disc rotor |
| Not Included | Inner bearing, outer bearing, oil seal, oil cap, and lug nuts |
| Verify | Bearing races and any additional hardware should be confirmed from current inventory photos, packaging, or packing slip before installation |
