At a Glance
- >2 × 3,500 lb Brake Drums – 5 on 4.75 Bolt Pattern
- >2 × 10" Brake Backing Plates (Left and Right)
- >10 × Lug Nuts
- >2 × 1.98" Dust Caps
- >2 × L44649 Outer Bearings
- Brand: R & P Carriages
- SKU: STUB-84-5475-D
Match the part number, measurements and connection points that apply to your trailer.
| Bearings | Match inner and outer bearing numbers. |
|---|---|
| Seal | Match the seal number or dimensions. |
| Bolt Pattern | Verify the complete lug pattern. |
| Brake Size | Confirm when applicable. |
Complete stub end spindle and brake drum kit for standard 3,500 lb trailer axles using a 5 on 4.75 bolt pattern.Often referred to as the “Small GM” pattern, this configuration is common on light-duty and utility trailers.Designed for replacing damaged or worn spindles and rebuilding both sides of one axle.
Stub end spindles are welded to an axle tube when the original spindle becomes bent, worn, or unsafe. The #84 spindle style is commonly used on 3,500 lb axles and requires L44649 outer and L68149 inner bearings.
The 5 on 4.75 bolt pattern is measured across the center of the wheel studs, not between adjacent studs. Confirm spindle dimensions, bearing numbers, and brake flange compatibility before installation.
| Specification | Detail |
|---|---|
| Axle Rating | 3,500 lb |
| Spindle Type | #84 Style (SP-20084FZ) |
| Spindle Base Diameter | 2.0" Round |
| Tail Shaft Length | 3.37" |
| Bolt Pattern | 5 on 4.75" |
| Brake Size | 10" |
Important: Verify all specifications before installation. Professional welding and alignment recommended.