At a Glance

> Check the Seal Surface: Replace the sleeve if it is grooved, pitted, rusted, or damaged.
> Match the Sleeve Size: Confirm the 2.25" O.D. and 2.213" I.D. against the original sleeve before ordering.
> Install Carefully: Avoid distorting the sleeve during removal or installation.
> Seal Leak Check: Look for grease trails behind the hub or inside the wheel.
> Sleeve Surface Check: Replace the sleeve if the sealing surface has a groove, visible wear line, pitting, or corrosion.
Brand: Tie Down
SKU: TD17292

Before You Order

Match the part number, measurements and connection points that apply to your trailer.

Part Number	Match the number stamped on the original bearing or seal.
Dimensions	Measure the mating surfaces when a number is unavailable.
Hub / Axle	Use capacity as context, not as the only fitment check.

Product Details

Trailer Axle Wear Sleeve / Stainless Wear Ring

Trailer Tie Down 6K Stainless Steel Wear Sleeve Ring 2.25" O.D. x 2.213" I.D.

Replacement stainless steel wear sleeve for compatible Tie Down 6,000 lb axle applications originally fitted with this style of removable wear sleeve. Verify your spindle journal and original sleeve measurements before ordering.

SKU: TD17292 2.25" O.D. / 2.213" I.D. Tie Down 6K Axle Application

Key Measurements & Specs

Specification	Detail
SKU	TD17292
Product Type	Trailer axle stainless steel wear sleeve / wear ring
Application Reference	Tie Down 6,000 lb axle wear sleeve application
Outside Diameter	2.25 in / 57.15 mm
Inside Diameter	2.213 in / 56.21 mm
Material	Stainless steel
Quantity Included	1 wear sleeve ring

Top Features

Feature	Buyer Benefit
Stainless Steel Construction	Provides a durable replacement seal surface for compatible axle setups.
6K Tie Down Application	Built for many factory Tie Down 6,000 lb axles that use this wear sleeve style.
Seal Surface Repair	Helps restore the surface where the hub seal rides on the spindle area.
Measurement-Based Fitment	Listed by O.D. and I.D. so the original sleeve can be compared before ordering.

Overview

This Tie Down 6K stainless steel wear sleeve is used on compatible trailer axles originally equipped with a removable sleeve at the hub seal contact area. The sleeve provides a clean, durable sealing surface for the hub seal and is commonly replaced when the original sleeve is grooved, worn, corroded, or damaged during service.

R&P Service Insight

A worn seal surface can cause repeat grease leakage even after installing a new seal. During hub service, inspect the sleeve surface before reassembly.

Check the Seal Surface: Replace the sleeve if it is grooved, pitted, rusted, or damaged.
Match the Sleeve Size: Confirm the 2.25" O.D. and 2.213" I.D. against the original sleeve before ordering.
Install Carefully: Avoid distorting the sleeve during removal or installation.

R&P Knowledge Hub

Compatibility: Fits many factory Tie Down 6K axles that were originally fitted with removable wear sleeves matching the listed measurements.

Axle Fit: Intended for 6,000 lb Tie Down axle applications where the original wear sleeve measures 2.25" outside diameter and 2.213" inside diameter.

Installation Notes: Remove the old sleeve, inspect the spindle area, and verify the new sleeve seats squarely before hub reassembly.

Performance Insight: A fresh stainless wear sleeve helps restore the seal contact surface and can help prevent repeat grease leakage caused by a worn sleeve.

Brand & Fitment Note

Selling Brand / Application: Tie Down application wear sleeve / wear ring.

Application Reference: Tie Down 6000 lb stainless steel wear ring, 2.25" outside diameter x 2.213" inside diameter.

What This Listing Includes: One stainless steel wear sleeve ring only.

Before Ordering: Compare your original sleeve and spindle setup to the listed measurements. Do not order by axle rating alone.

R&P Repair Insight

If a trailer hub continues to push grease past the seal, the problem may not be the seal alone. The sleeve surface the seal rides on must be smooth, correctly sized, and free of grooves or corrosion.

Seal Leak Check: Look for grease trails behind the hub or inside the wheel.
Sleeve Surface Check: Replace the sleeve if the sealing surface has a groove, visible wear line, pitting, or corrosion.
Fitment Check: Measure the original sleeve before removal when possible and confirm both O.D. and I.D.

Features

Stainless Steel Construction

Designed as a durable replacement wear surface for compatible Tie Down axle seal areas.

6K Tie Down Axle Application

Made for many factory Tie Down 6000 lb axles that use this style of removable wear sleeve.

Critical Seal Surface Part

Helps provide the correct sealing surface where the hub seal rides during trailer operation.

Measurement-Based Fitment

Listed by outside diameter and inside diameter so you can compare directly with the original sleeve before ordering.

Specifications

Specification	Detail
SKU	TD17292
Brand / Application	Tie Down 6,000 lb axle wear sleeve application
Product Type	Stainless steel wear sleeve / wear ring
Quantity Included	1 wear sleeve ring
Material	Stainless steel
Outside Diameter	2.25 in / 57.15 mm
Inside Diameter	2.213 in / 56.21 mm
Axle Rating Reference	6,000 lb Tie Down axle application

Fitment / Application

Category	Details
Primary Fit	Many factory Tie Down axles fitted with removable wear sleeves.
Axle Rating Reference	6,000 lb Tie Down axle applications.
Common Use	Replacement sleeve surface where the hub seal rides on the spindle area.
Verify Before Ordering	Match your original wear sleeve dimensions, spindle condition, and axle setup before installation.

Detailed Measurements

Key Dimension	Measurement
Outside Diameter	2.25 in / 57.15 mm
Inside Diameter	2.213 in / 56.21 mm
Axle Rating Reference	6,000 lb Tie Down axle application
Fitment Method	Compare measurements against the original sleeve before ordering.

Included Components

Quantity	Item
1	Tie Down 6K stainless steel wear sleeve / wear ring
Not Included	Hub, bearings, seal, spindle, axle, grease, installation tools, or additional hardware

Important Fitment Note: This listing is for a replacement stainless steel wear sleeve only. Tie Down axle setups can vary, so please verify the original sleeve size, spindle condition, and axle configuration before ordering. Do not rely on axle weight rating alone.

Search Trailer Axle Parts

Tie Down 6K stainless wear sleeve TD17292, trailer axle wear ring 2.25 OD 2.213 ID, stainless steel axle wear sleeve, Tie Down 6000 lb axle wear sleeve, trailer hub seal wear sleeve, spindle seal surface repair sleeve, replacement wear ring for Tie Down axle applications

Trailer Tie Down 6K Stainless Steel Wear Sleeve Ring 2.25" O.D. x 2.213" I.D. (TD17292)