At a Glance

> Thread Match: This stud uses 9/16"-18 threads and must be paired with the correct matching lug nut.
> Spline Fit: The 0.627" spline diameter is the press-fit area that locks into the hub flange.
> Installation Check: Confirm the old stud measurements before pressing the replacement stud into the hub or drum.
> Check the Spline: A loose or undersized spline can spin in the hub flange and prevent proper wheel torque.
> Check the Threads: Damaged, stretched, or cross-threaded studs should be replaced rather than reused.
Brand: Need A Trailer Part®
SKU: 007-357-00

Before You Order

Match the part number, measurements and connection points that apply to your trailer.

Bearings	Match inner and outer bearing numbers.
Seal	Match the seal number or dimensions.
Bolt Pattern	Verify the complete lug pattern.
Brake Size	Confirm when applicable.

Product Details

Trailer Hub Hardware — Drive-In Wheel Stud

AL-KO 9/16"-18 Drive-In Wheel Stud – 2.82" Long, 0.627" Spline Trailer Hub Stud

Replacement drive-in wheel stud for trailer hub and drum assemblies that use 9/16"-18 lug nuts. Sold individually for repair, service, and stud replacement work.

Part Number: 007-357-00 9/16"-18 Thread 0.627" Spline Diameter

Overview

This replacement drive-in wheel stud is designed for trailer hub and brake drum assemblies that use 9/16"-18 lug nuts. The press-fit splined section locks into the hub flange to help prevent the stud from spinning while the wheel is installed and torqued. This listing includes one individual wheel stud.

R&P Service Insight

A worn, stripped, bent, or spinning wheel stud should be replaced before the trailer is returned to service. The stud must match the thread size, overall length, and spline diameter required by the hub or drum.

Thread Match: This stud uses 9/16"-18 threads and must be paired with the correct matching lug nut.
Spline Fit: The 0.627" spline diameter is the press-fit area that locks into the hub flange.
Installation Check: Confirm the old stud measurements before pressing the replacement stud into the hub or drum.

R&P Knowledge Hub

Compatibility: For trailer hub and drum assemblies that require a 9/16"-18 drive-in wheel stud with a 2.82" overall length and 0.627" spline diameter.

Vehicle / System Fit: Trailer wheel-end hardware for compatible hub and brake drum flange applications.

Installation Notes: Verify thread size, spline diameter, shoulder style, and total stud length before ordering or installing.

Performance Insight: The splined press-fit section is what keeps the stud from rotating when the lug nut is tightened. An incorrect knurl diameter can cause the stud to spin or damage the hub flange.

Brand & Fitment Note

Selling Brand: Dexter / R&P Carriages supplied replacement wheel stud.

Application Reference: The Dexter part number in this listing is used as the part identification and fitment reference for matching trailer hub and drum applications.

What This Means: This listing is for one replacement drive-in wheel stud. Fitment depends on matching the required thread size, spline diameter, and overall length.

Before Ordering: Verify the old stud dimensions, hub or drum style, lug nut thread size, and spline diameter before installation.

R&P Repair Insight

Wheel studs are press-fit fasteners installed into the hub or brake drum flange. The splined shoulder creates an interference fit that keeps the stud seated and prevents rotation under lug nut torque.

Check the Spline: A loose or undersized spline can spin in the hub flange and prevent proper wheel torque.
Check the Threads: Damaged, stretched, or cross-threaded studs should be replaced rather than reused.
Check the Length: The replacement stud must provide proper lug nut engagement without creating clearance issues.

Features

Drive-In Replacement Stud

Press-fit wheel stud designed for compatible trailer hub and brake drum flange applications.

9/16"-18 Thread Size

Matches trailer wheel-end setups that use 9/16"-18 lug nuts.

0.627" Spline Diameter

Splined knurl section helps lock the stud into the hub flange and prevent rotation.

2.82" Overall Length

Replacement length for compatible hub and drum assemblies where this measurement is required.

Specifications

Specification	Detail
Part Number	007-357-00
Brand	Dexter
Product Type	Drive-in / press-fit wheel stud
Thread Size	9/16"-18
Overall Length	2.82"
Spline Diameter	0.627"
Application	Trailer hub and brake drum wheel stud replacement
Construction	Heavy-duty steel construction

Fitment / Application

Category	Details
Vehicle / System	Trailer wheel-end hardware
Primary Fit	Compatible trailer hubs and drums requiring a 9/16"-18 drive-in stud
Secondary Fit	Service replacement for matching hub flange and spline-diameter applications
Notes	Confirm thread size, spline diameter, and overall length before installation. Do not assume fitment by axle capacity alone.

Included Components

Quantity	Item
1	9/16"-18 drive-in wheel stud, 2.82" overall length, 0.627" spline diameter

Thank You For Choosing R&P Carriages For Your Online Shopping Source!

Verify all measurements before installation, including thread size, overall stud length, spline diameter, and hub or drum flange fit. An incorrect spline diameter can cause the stud to spin or damage the hub during installation.

Shop Related Wheel Studs

Dexter 007-357-00 wheel stud, 9/16-18 wheel stud, drive in trailer wheel stud, press fit wheel stud, 2.82 inch wheel stud, 0.627 spline wheel stud, trailer hub wheel stud, trailer drum wheel stud, replacement trailer wheel stud

AL-KO 9/16"-18 Drive-In Wheel Stud – 2.82" Long, 0.627" Spline Trailer Hub Stud (007-357-00)