PAIR (one left, one right) of 9,000#/10,000#
SELF ADJUSTING (Never Adjust) Brakes
These are Original Equipment for Lippert Axles, and are Quality Aftermarket replacements for Dexter and some others
General Duty (10K GD) Trailer Axle
12 1/4 x 3 3/8" Electric Brake Assembly
7 Hole mount bolt
SELF ADJUSTING (Never Adjust) Brakes
These are Original Equipment for Lippert Axles, and are Quality Aftermarket replacements for Dexter and some others
General Duty (10K GD) Trailer Axle
12 1/4 x 3 3/8" Electric Brake Assembly
7 Hole mount bolt
Part Number: BK-10KE-SET
Replacement for Lippert 10K part 181936 and 181935 Axles,
and
Dexter 023-450 and 023-451
Features
-Self Adjusting! (Nev-R-Just)
- typical brakes for axles 10,000#
- This assembly uses a 7 bolt mounting pattern that should match your trailer axle.
(will not fit 4 bolt mounts!)
- Includes all hardware, including yellow wire magnet
- Price is PER PAIR, one left, one right
(You will need 1 pair to do one axle, 2 to do 2 axles, etc)
Technical Information
- There is a pair of lead wires attached to the brake magnet. One is ground and one is power. It doesn't matter which one you use in either location as long as they are attached properly.
- The way the brake assembly functions is there is a magnet that will apply friction to the lever in return pushes the shoes out into the drum causing friction which allows your trailer to come to a easy stop.
These Backing plates also can replace -Self Adjusting! (Nev-R-Just)
- typical brakes for axles 10,000#
- This assembly uses a 7 bolt mounting pattern that should match your trailer axle.
(will not fit 4 bolt mounts!)
- Includes all hardware, including yellow wire magnet
- Price is PER PAIR, one left, one right
(You will need 1 pair to do one axle, 2 to do 2 axles, etc)
Technical Information
- There is a pair of lead wires attached to the brake magnet. One is ground and one is power. It doesn't matter which one you use in either location as long as they are attached properly.
- The way the brake assembly functions is there is a magnet that will apply friction to the lever in return pushes the shoes out into the drum causing friction which allows your trailer to come to a easy stop.
Dexter Part Number 023-450-00 and 023-451-00
Some 10K "heavy duty" Axles Use The 12-1/4" x 4" Brake Assembly. Please measure before ordering!
The axles may have a tag still on them but often it is rusted or gone...
BUT!!! There is a number CAST into the brake drum if you are not sure (you probably have to take off the wheels to see it) The number should be 9-123 for newer trailers, and for older drums would be 9-44 or 9-415
If your drum has 9-27 it is the "Heavy Duty" 10K, (and if it has 9-28 it is a 12K Axle)these brakes will not work for you.
You might also like
R & P Carriages
Regular price
$199.99
Unbranded
Regular price
$170.99
R & P Carriages
Regular price
$284.00