Complete Trailer Brake Setup, with drums, seals, Bearings, Brake shoes, new hardware, backing plates, for one axle!
for 3500# axles from Dexter, AL-KO, AXIS, Quality, and others!
If you have a trailer without brakes, and you want to add them, this kit has what you will need. This kit fits standard 3500# axle, either Spring or Torsion, EZ lube or Standard. Click here for wire and installation instructions
Most 5 bolt wheel trailers are 3500# axles. (does yours have a 2-3/8" axle tube?) Some small trailers (usually with small tires and a 1-5/8" axle tube) will have the smaller spindles, and for those you will need a smaller (or larger) brake kit (click here for the smaller brake kits) Look at the measurements below if you are not sure.
Measurements from Center Bolt Hole to Center Bolt Hole is 2 7/8" on Backing Plate
This Kit Includes:TWO - New 10" brake drums, 5" bolt pattern with Races already pressed in
All hardware to attach backing plates to axle mount plate (special 7/16 nuts).
All brake hardware, springs, levers, magnets, shoes, etc.
New inner grease seals
All New Wheel Bearings (Shipping loose with kit):
TWO - 1.7" 10-19 seals
TWO - L44649 bearings
TWO - L68149 bearings
TEN - Matching lug nuts, 1/2-20
TWO - New EZ Lube Dust Caps
In addition, you should see a small square plate welded to the axle tube, with 4 holes, (to bolt the brake plate to) and your axle tube will be about 2 1/4" OD. If you have a 2.75" axle tube, it is the larger 5200, 6000, or 7000# axle, and if you have the smaller 1-5/8" axle tube, it has the smaller 2000/2200# axle
This auction is for a trailer with a 5 bolt, 5" bolt pattern! I stock all sizes, so please check my other auctions or specify you want a different size!
You might also like
