Drums & Plates

Right Hand - 12" by 3-3/8" Electric Trailer Brake – 8,000 lb – 4 Bolt Mount (4739-R)

Right Hand - 12" by 3-3/8" Electric Trailer Brake – 8,000 lb – 4 Bolt Mount Part Number: 4739-R Right-hand (passenger side) 12" by 3-3/8" electric brake assembly for 8,000 lb trailer axles using a 4-bolt backing plate mount. Features a cast backing plate and auto-adjusting brake design. All internal brake components are pre-assembled on...

SKU 4739-R Brand Rockwell

$320.00

● IN STOCK

Left Hand - 12" by 3 3/8" Electric Trailer Brake – 8,000 lb – 4 Bolt Mount (4739-L)

Left Hand - 12" by 3-3/8" Electric Trailer Brake – 8,000 lb – 4 Bolt Mount Part Number: 4739-L Left-hand (driver side) 12" by 3 3/8" electric brake assembly for 8,000 lb trailer axles using a 4-bolt backing plate mount. Features a cast backing plate and auto-adjusting brake design. All internal brake components are pre-assembled...

SKU 4739-L Brand Rockwell

$320.00

● IN STOCK

12-1/4 Electric Trailer Brake Adjuster Cable Kit Left Side 8k-10k 12k 15k (K71-504-00)

12 1/4 Electric Brake Adjuster Kit Left Side (DRIVERS) For One 8k, 9k, 10k, 12k, or 15k Electric Brake Part Number: K71-504-00 This kit contains: One Adjuster Screw Assembly LH One Adjuster Cable One Self Adjusting Lever LH Left Side 12 1/4" Electric Brake Adjuster Kit Each Kit Contains a Self Adjuster Cable, Plate and...

SKU K71-504-00 Brand Dexter

$46.89

● IN STOCK

9K & 10K General Duty Backing Plate Hardware Kit, 7 Bolts, 7 Nuts, 7 Washers (BRHK10K-LOTOF7)

9k & 10K GD Backing Plate Hardware Kit, 7 Bolts, 7 Nuts, 7 Washers-LOT OF 7Part Number - BRHK10K-LOTOF7This is the hardware needed to mount your 10k backing plates to you flanges on your axle. In this kit you receive 7 bolts, 7 lock washers, and 7 nuts. If you backing plate is a 7...

SKU BRHK10K-LOTOF7 Brand R&P CARRIAGES

$10.02

● IN STOCK

TWO 7" Electric 5 x 4.5 Brake Drum 2000# Rated for Trailers New Bearings Hub Lug (7IN5BD-KIT2X)

TWO - Replacement 7" Brake Drums5 x 4.5 Bolt CirclePart Number: 7IN5BD-KIT2X This kit fits standard 2000# axle, either Spring or Torsion, EZ lube or Standard with the 1" or a 1-1/16" spindle size. (We send both size bearings and seals) Standard spindle length is approximately 3 1/2" from threads to bearing shoulder. (we have seen rare cases where the spindle...

SKU 7IN5BD-KIT2X Brand R & P Carriages

$99.60

● IN STOCK

Dexter 15k Hydraulic Brake Backing Plate 12.25 x 5 Right Hand 7 Bolt Axle Trailer (K23-407-00)

Dexter 15K Hydraulic Brake Backing Plate – Right Hand Part Number: K23-407-00 Genuine Dexter hydraulic brake backing plate designed for 15,000 lb axle applications. This assembly is configured for the right-hand (passenger side) position and features forward self-adjusting (FSA) brake operation. Features Hydraulic brake backing plate assembly 15,000 lb axle rating 12.25" diameter × 5"...

SKU K23-407-00 Brand Dexter

$469.85

● IN STOCK

Left 10x2.25 Electric Brake w Parking Brake Fits Dexter K23-086-00 Trailer Axle (77-10EP-21)

10" x 2.25" Electric Backing Plate with Parking Brake Left Hand Drivers Side Part Number: 77-10EP-21 This Listing Contains: 1 x 10" Brake Assembly Left Hand Side Specs: 4 Bolt (2-7/8" OC Square) 10" x 2-1/4" 3500# Manual Adjust Electric Brake Fits Dexter K23-086-00 / 23-86 / 023-086-00 About Us We are a Family company and...

SKU 77-10EP-21 Brand R&P CARRIAGES

$65.99

● IN STOCK

Add Brakes to Your Trailer Complete Kit 3500 Axle 5 x 4.5 Electric Never Adjust (82475-C-FSA-DEX)

Complete Add Brakes to Your Trailer Kit with a 5 x 4.5 Bolt Pattern and Genuine Dexter Never Adjust Backing PlatesPart#: 82475-C-FSA-DEXComplete Trailer Brake Setup, with drums, seals, Brake shoes, Bearings, new hardware, backing plates, Battery Break Away, EVERYTHING for one axle! for 3500# axles from Dexter, AL-KO, AXIS, Quality, and others! Measurements from Center Bolt Hole...

SKU 82475-C-FSA-DEX Brand Dexter

$424.17

● IN STOCK

Genuine Dexter Trailer Axel 7" Electric Brake Drum 5 x 4.5 Axle 2000# hub (008-257-04-KIT)

Genuine Dexter 7" Trailer Brake Drum Kit – 5 on 4.5 – 2,000 lb Axles Part Number: 008-257-04-KIT Genuine Dexter 7" trailer brake drum assembly with 5 on 4.5" bolt pattern. Designed for standard 2,000 lb trailer axles, including spring and torsion configurations. Compatible with EZ Lube and standard spindles using either 1" or 1-1/16"...

SKU 008-257-04-KIT Brand Dexter

$162.57

● IN STOCK

2 PAIR 7" Electric Backing Plates For 2000# Axles Replaces Dexter 23-47 and 23-48 (7EB-2P)

2 PAIR 7" Electric Backing Plates For 2000# Axles Replaces Dexter 23-47 and 23-48Part Number - 7EB-2PThis kit will replace your 7" backing plates on your 2000# tandem axle (or single axle and you can have a spare set on hand for future use). These backing plates are electric and can replace the Dexter 23-47...

SKU 7EB-2P Brand R & P Carriages

$165.99

● IN STOCK

Dexter Trailer Axle Brake 2000-2200# 7"x1 3/4 Hydraulic Backing Plate Right Axel (023-399-00)

Dexter Trailer Axle Brake 2000-2200# 7"x1 3/4 Hydraulic Backing Plate Right Axel (023-399-00) Part # 023-399-00 Affordable Pricing Quality Products Fast Shipping Ships from our warehouse Fitment Help Real trailer-parts experts Dexter 7" x 1-3/4" Hydraulic Brake Backing Plate – 2,000-2,200 lb Axle – Right Hand Part Number: 023-399-00 Complete 7" x 1-3/4" hydraulic uni-servo brake...

SKU 023-399-00 Brand Dexter

$149.25

● IN STOCK

Dexter Trailer Axle Brake 2000-2200# 7" x1 3/4 Hydraulic Backing Plate Left Axel (023-398-00)

Dexter 7" x 1-3/4" Hydraulic Brake Backing Plate – 2,000-2,200 lb Axle – Left Hand Part Number: 023-398-00 Complete 7" x 1-3/4" hydraulic uni-servo brake backing plate assembly for 2,000–2,200 lb trailer axles.Left-hand configuration (driver side). Common replacement for boat and snowmobile trailers.Designed for hydraulic drum brake systems only. Cannot be used with electric brake...

SKU 023-398-00 Brand Dexter

$149.25

● IN STOCK

DEXTER 10" x 2.2 Brake Drum Hub 5 x 4.75" Lug bolt 3500 Axle Kit Trailer Axel (K08-247-93)

Genuine USA Made Dexter 8-247 Replacement Brake Drums for Your Trailer 5 Bolt, 4.75" Bolt Circle Specs: 10" x 2.25" 3500# Axles (1750# Rated) 5x4.75 Bolt Pattern (4.5" Stud Spacing) Includes: 1x Brake Drum Dexter 5x4.75 1x L44649 Bearing (Outer) 1x L68249 Bearing (Inner) 1x Seal 1.719" ID x 2.56" OD 1x Dust Cap ...

SKU K08-247-93 Brand Dexter

$128.84

● IN STOCK

10"x 2.25" Hydraulic Free Backing Brake Kit for One Axle (94545-FREE-BACKING-KIT)

10" Free Backing Hydraulic Brake Kit – 3500 lb – 5 on 4.5 Part Number: 94545-FREE-BACKING-KIT Complete 10" free-backing hydraulic brake kit for 3,500 lb trailer axles.Designed for boat trailers used in fresh water applications.Includes left and right hydraulic backing plates, hub/drums, and bearing kits. R&P Knowledge Hub Free-backing hydraulic brakes allow the trailer to...

SKU 94545-FREE-BACKING-KIT Brand Need a Trailer Part

$246.52

● IN STOCK

5 x 4.5 Right Side Brake Assembly Spindle Kit Stub End unit Trailer Axle 3500 84 (STUB-84-545-DR)

5 on 4.5 Right Side Brake Assembly Spindle Kit – 3,500 lb Axle – #84 Part Number: STUB-84-545-DR Complete right-side brake assembly and spindle replacement kit for 3,500 lb trailer axles using a 5 on 4.5 bolt pattern. Designed as a direct replacement for damaged or worn spindles. Spindle features a 3.37" tail shaft and...

SKU STUB-84-545-DR Brand R & P Carriages

$149.08

● IN STOCK

Dexter Drum, 8K, 8 x 6.5, 5/8" Studs, 4.75" Pilot, 50MM Bearing, Nev-R-Lube, Includes 031-071-03 Bearing Cartridge and 069-093-00 bearing Retainer (008-389-80)

Dexter 8K Trailer Brake Drum – 8 on 6.5" – 5/8" Studs – Nev-R-Lube 50mm Part Number: 008-389-80 Genuine Dexter 8,000 lb rated trailer brake drum designed specifically for Nev-R-Lube axle systems utilizing a 50mm sealed cartridge bearing. This assembly includes the bearing cartridge and retainer pre-installed for direct replacement on compatible Dexter 8K Nev-R-Lube...

SKU 008-389-80 Brand Dexter

$836.57

● IN STOCK

Basic Kit 5x5.5" Drum 3500# 10" Electric Backing Plate Right Side Only Trailer (94555-B-IMP-R)

Replace YourRight Brake with a 5 x 5.5 Bolt Pattern Drum and a Right 10" Backing PlatePart#: 94555-B-IMP-R (5-1/4" Stud Spacing)If you have a trailer with a bad left brake that needs to be replaced, this kit has what you will need. This kit fits standard 3500# axle, either Spring or Torsion, EZ lube or Standard. Complete Trailer Brake Setup,...

SKU 94555-B-IMP-R Brand R & P Carriages

$95.99

● IN STOCK

Add Brakes Kit 8 x 6.5 Genuine Dexter 1/2 Stud Never Adjust 7K Backing Plates (92865-B-FSA-DEX)

Add Brakes Kit, 8 x 6.5 Dexter 1/2 Stud, Never Adjust 7K Backing PlatesPart Number - 92865-B-FSA-DEXThis kit is for replacement of the left and right sides of a 7k axleThis kit includes the following: (2) 008-219-04 Hub/Drum Dexter 8 x 6.5" bolt pattern 1/2" studs Rated for 7000# (1) K23-464-00 Backing plate Dexter Electric...

SKU 92865-B-FSA-DEX Brand R & P Carriages

$645.34 ~~$842.58~~ Sale

● IN STOCK

Dexter 15k Hydraulic Brake Backing Plate 12.25 x 5 Left Hand 7 Bolt Axle Trailer (K23-406-00)

Dexter 15K Hydraulic Brake Backing Plate – 12.25" × 5" – 7 Bolt – Left Hand – Forward Self Adjust Part Number: K23-406-00 Hydraulic brake backing plate assembly designed for 15,000 lb trailer axles using 12.25" × 5" brake drums. This 7-bolt configuration fits the left-hand (driver side) position on compatible 15K axle applications. R&P...

SKU K23-406-00 Brand Dexter

$523.30

● IN STOCK

Right 10x2.25 Electric Brake w Parking Brake Fits Dexter K23-087-00 Trailer Axle (77-10EP-22)

10" x 2.25" Electric Backing Plate with Parking Brake Right Hand Passengers Side Part Number: 77-10EP-22 This Listing Contains: 1 x 10" Brake Assembly Right Hand Side Specs: 4 Bolt (2-7/8" OC Square) 10" x 2-1/4" 3500# Manual Adjust Electric Brake Fits Dexter K23-087-00 / 23-87 / 023-087-00 Our Location: R and P Carriages270 E Jackson StreetSeneca,...

SKU 77-10EP-22 Brand R&P CARRIAGES

$65.99

● IN STOCK

2 Pairs (4 Brakes) - 10" Hydraulic Dacromet Coated 3500# Free Backing Plate Trailer Brakes (AKFBBRK-35-PAIR-DACROx2)

2 Pairs (4 Brakes) – 10" Hydraulic Free-Backing Trailer BrakesDacromet Coated – 3,500 lb Axles Part Number: AKFBBRK-35-PAIR-DACROX2 Set of four (2 pairs) 10" hydraulic drum brake assemblies designed for 3,500 lb trailer axles. These marine-grade free-backing brake assemblies feature a Dacromet-coated backing plate for enhanced corrosion resistance, making them ideal for boat trailers and...

SKU AKFBBRK-35-PAIR-DACROx2 Brand R & P Carriages

$299.95 — Sold Out

UNAVAILABLE VIEW DETAILS

10" x 1.5" USA Made Dexter Trailer Axle Electric Brake Assy Left Hand 3K 23-472 (023-472-00)

Dexter 10" x 1-1/2" Electric Brake Assembly – 3,000 lb D30 Axle – 4 Bolt – Left Hand Part Number: 023-472-00 – Driver Side Genuine USA Made Dexter 10" x 1-1/2" electric trailer brake assembly designed specifically for 3,000 lb Dexter D30 axle applications. This is the Left Hand (Driver Side) configuration. Engineered to mount...

SKU 023-472-00 Brand Dexter

$136.99

● IN STOCK

Trailer Axle Hub 8 lug 8-288 9K/10K GD Two piece Dexter Prior 2009 fit 9-44 Drum (008-288-03)

Dexter 008-288-03 Trailer Hub – 9K / 10K Axle (Pre-2009) – 8 on 6.5 – 5/8"-18 Studs Part Number: 008-288-03 Replacement trailer hub for Dexter 9,000 lb and 10,000 lb axles manufactured through July 1, 2009. This hub fits the older two-piece hub and drum configuration commonly identified by drums with “9-44” cast into them....

SKU 008-288-03 Brand Dexter

$324.99

● IN STOCK

Dexter Drum 8K oil bath 9/16" stud 4.75" pilot hole 12.25" x 3.375 With Bearings (008-285-09-KIT)

Dexter 8,000 lb Oil Bath Drum – 12.25" x 3.375" – 9/16" Stud – 8 Lug Part Number: 008-285-09-KIT Genuine Dexter 8,000 lb rated oil bath brake drum assembly measuring 12.25" x 3.375". Features 9/16" wheel studs and a 4.75" center pilot hole. Designed for heavy-duty 8K trailer axle applications using an oil bath lubrication...

SKU 008-285-09-KIT Brand Dexter

$577.54

● IN STOCK