Disc Brake Pad Set for Kodiak 10K-12K Axles - 2 Wheel Kit
Replacement trailer disc brake pad set for compatible Kodiak-style hydraulic disc brake systems commonly used on 10,000 lb and 12,000 lb trailer axle applications. This kit services two wheels and is intended for compatible calipers using the listed DBC pad configuration.
Specifications
| Specification | Detail |
|---|---|
| Part Number | TS-7020M-LOTOF4 |
| Brand / Selling Source | R&P Carriages replacement service part |
| Product Type | Trailer disc brake pad set |
| Application | Trailer hydraulic disc brakes |
| Axle Rating Application | 10,000 lb / 12,000 lb trailer axle applications, application dependent |
| Caliper Compatibility | Kodiak DBC-225 style per listing reference; related 10K-12K references may use DBC-2250 wording. Verify the caliper marking and pad shape before ordering. |
| Alternate References | AL-KO K71-866-00; MAT TS-7020M |
| Wheels Serviced | 2 wheels |
| Material / Compound | Brake friction material; exact compound not specified in verified product details |
Fitment / Application
| Category | Details |
|---|---|
| Vehicle / System | Heavy-duty trailer hydraulic disc brake systems |
| Primary Fit | Compatible with Kodiak disc brake calipers using the listed DBC pad style where pad profile, caliper, and rotor setup match |
| Common Use Cases | Equipment trailers, gooseneck trailers, heavy-duty utility trailers, commercial trailers, enclosed trailers, and service trailers with matching hydraulic disc brake systems |
| Pad Profile Check | Compare tab shape, backing plate profile, friction surface, rotor diameter, and caliper model before installation |
| Notes | Verify caliper model and pad shape prior to ordering. Brand and part-number references are for compatibility identification only. |
Overview
This TS-7020M-LOTOF4 disc brake pad set is intended for trailer brake service on compatible Kodiak-style disc brake systems commonly found on 10K and 12K trailer axle applications. Brake pads are normal wear items that press against the rotor to slow or stop the trailer. Replacing worn pads helps restore braking performance and can help prevent rotor damage when done before the friction material is fully depleted.
R&P Service Insight
On heavy-duty trailers, pad wear should be treated as a brake-system inspection point, not just a quick parts swap. Uneven pad wear, heat marks, or a dragging brake can point to caliper, hydraulic, bearing, or rotor issues that should be corrected before towing.
- Wear Check: Replace pads if friction material is thin, cracked, glazed, contaminated, uneven, or separating from the backing plate.
- Rotor Check: Inspect the rotor for scoring, grooves, heat checking, rust scale, and surface contamination before installing new pads.
- Caliper Check: Confirm the caliper moves correctly and accepts the listed pad profile before installing this set.
R&P Knowledge Hub
Compatibility: Designed for compatible Kodiak-style disc brake applications where the DBC pad profile, caliper, and rotor setup match.
Vehicle / System Fit: Commonly used on heavy-duty trailers with hydraulic disc brakes and 10K-12K axle applications where this pad configuration is required.
Parts That Fit This Application: Related fitment references include AL-KO K71-866-00 and MAT TS-7020M. These references are for compatibility identification only and do not mean those branded parts are included.
Installation Notes: Verify caliper model, rotor diameter, pad profile, axle rating, and existing part number before ordering or installing.
Performance Insight: New pads should be installed only after the mating rotor and caliper condition are confirmed. A damaged rotor or sticking caliper can cause poor braking and premature pad wear.
Brand & Fitment Note
Selling Brand: R&P Carriages replacement service part.
Application Reference: Kodiak, AL-KO, MAT, Dexter, DBC-225, DBC-2250, and K71-866-00 references are used only to identify compatible brake-system applications and pad-style references.
What This Means: This listing is for a replacement disc brake pad set, not a guaranteed OEM-branded Kodiak, Dexter, AL-KO, or MAT kit unless specifically stated and verified.
Before Ordering: Verify measurements, pad profile, caliper style, rotor setup, axle rating, and included components before installation.
R&P Repair Insight
Brake pad replacement is most successful when the whole brake assembly is checked at the same time. If the trailer had pulling, dragging, overheating, noise, or uneven braking before pad replacement, inspect beyond the pads before returning the trailer to service.
- Pad Shape Check: Compare your old pads to this style before installation, including tabs, backing plate curve, friction surface, and overall length.
- Heat Damage Check: Blueing, glazing, cracking, or crumbling friction material can indicate overheating or dragging brakes.
- Two-Wheel Service: This kit services two wheel positions so both sides of the axle can be serviced together when the application matches.
Features
Replacement Disc Brake Pads
Built as a service replacement for compatible Kodiak-style trailer hydraulic disc brake systems.
10K-12K Axle Applications
Intended for matching heavy-duty trailer disc brake applications commonly found on 10,000 lb and 12,000 lb trailer axles.
Services Two Wheels
Kit is arranged for two wheel positions, making it useful for axle-level brake pad maintenance when both sides use the same compatible setup.
Maintenance Replacement
Useful when existing pads are worn, noisy, heat-marked, contaminated, or being replaced during scheduled brake service.
Included Components
| Quantity | Item |
|---|---|
| 1 | Disc brake pad set for two wheel positions |
| Not Included | Calipers, rotors, brackets, bearings, seals, hydraulic lines, mounting hardware, installation tools, grease, and instructions unless shown separately in the order. |
Product Video
