LED Trailer Stop / Tail / Brake Lights
Two - Maxxima 6" Red LED Ultra Thin Stop Tail Brake Lights
This listing is for two Maxxima M63350-R red LED ultra thin stop, tail, and brake lights. These low-profile 6.5" oval lights are built with sealed electronics, polycarbonate lens and housing construction, and 3-wire 6" leads for trailer lighting applications where the size, wiring, and mounting style match.
Part Number: M63350R-LOTOF2 Quantity: 2 Lights 6.5" x 2.3" x 0.4"
Key Measurements & Specs
| Specification |
Detail |
| Part Number / SKU |
M63350R-LOTOF2 |
| Brand |
Maxxima |
| Product Type |
Red LED stop / tail / brake light |
| Overall Size |
6.5" wide x 2.3" high x 0.4" deep |
| LED Count |
14 LEDs |
| Quantity Included |
Two lights |
Fitment / Application
| Category |
Details |
| Application |
Trailer, truck, RV, and utility lighting applications requiring a red stop / tail / brake light |
| Mounting Style |
Grommet, tape, or screw mounting where the mounting surface and hole spacing match |
| Mounting Holes |
Two 3/16" diameter mounting holes, 5-1/2" center to center |
| Wiring |
3-wire design with 6" leads |
| Important Note |
Verify light size, wiring style, mounting method, and mounting hole spacing before ordering. |
Top Features
| Feature |
Buyer Benefit |
| Ultra Thin Profile |
0.4" low-profile depth helps create a cleaner, flush-style trailer lighting installation. |
| Sealed Electronics |
Designed to help protect the internal electronics from normal trailer-use exposure. |
| Polycarbonate Build |
Polycarbonate lens and housing construction for durable exterior lighting use. |
| Horizontal or Vertical Use |
Can be used in either orientation when the trailer application allows proper placement and compliance. |
Overview
The Maxxima M63350-R is a red LED ultra thin stop, tail, and brake light for trailer and vehicle lighting applications. This two-light listing is a good choice when replacing both matching lights or installing a matched pair on a trailer where a 6.5" x 2.3" red oval light with 3-wire 6" leads is required.
R&P Service Insight
Before replacing trailer lights, match the physical size, wiring style, and mounting pattern. A light can look close in a photo but still require a different grommet, adhesive mount, screw pattern, or wiring setup.
-
Measure First: Confirm the 6.5" width, 2.3" height, and 0.4" depth against your current light or mounting location.
-
Check Wiring: This light uses a 3-wire design with 6" leads.
-
Choose Mounting: These lights can be mounted by grommet, tape, or screws depending on your trailer setup.
R&P Knowledge Hub
Compatibility: Designed for applications that use a red oval LED stop, tail, and brake light with matching dimensions, wiring, and mounting requirements.
Vehicle / System Fit: Trailer, truck, RV, and utility trailer lighting systems where the 12.8 VDC electrical system and 3-wire lead configuration match.
Installation Notes: Verify mounting hole spacing, mounting surface condition, wiring function, and required grommet or tape option before installation.
Performance Insight: The ultra thin 0.4" low-profile design works well where a cleaner surface-mounted or flush-style lighting appearance is desired.
Brand & Fitment Note
Selling Brand: Maxxima
Application Reference: This listing is for replacement or new-install trailer lighting applications where the dimensions, voltage, wiring, and mounting style match the customer’s existing setup.
What This Means: This listing is for two Maxxima M63350-R red LED stop, tail, and brake lights.
Before Ordering: Verify measurements, wiring, mounting method, mounting hole spacing, and included components before installation.
R&P Repair Insight
When replacing trailer stop, tail, or brake lights, most fitment issues come from mismatched mounting style, incorrect wiring identification, or assuming all 6" oval-style lights use the same mounting setup.
-
Mounting Check: Confirm whether your trailer uses grommet mount, tape mount, or screw mount before ordering accessories.
-
Hole Spacing Check: These lights have two 3/16" mounting holes spaced 5-1/2" center to center.
-
Function Check: Confirm stop, tail, and brake wiring functions before final installation.
Features
Ultra Thin 0.4" Low Profile Design
Low-profile depth gives the light a clean installed appearance and reduces protrusion from the mounting surface.
Polycarbonate Lens & Housing
Built with polycarbonate lens and housing construction for trailer and vehicle lighting use.
Completely Sealed Electronics
Sealed electronics help protect the light assembly in exterior trailer lighting applications.
Horizontal or Vertical Usage
Can be mounted horizontally or vertically when the trailer application, wiring, and compliance requirements allow it.
Specifications
| Specification |
Detail |
| LEDs |
14 |
| Width |
6.5" |
| Height |
2.3" |
| Depth |
0.4" |
| DOT / SAE |
J1395, J1398, J585e |
| Legal Lighting Codes |
I6S2T2 |
| Amp Draw |
230 mA |
| Voltage |
12.8 VDC |
| Connector / Wiring |
3-wire design with 6" leads |
| Mounting |
Grommet, tape, or screws |
| Mounting Holes |
Two 3/16" diameter holes, 5-1/2" center to center |
Included Components
| Quantity |
Item |
| 2 |
Maxxima M63350-R red LED ultra thin stop / tail / brake lights |
| Included |
Mounting screws and screw hole covers |
| Optional / Verify Selection |
Mounting grommet or mounting tape option, depending on the mounting setup ordered |
Important Fitment Note: Price is for two lights. Order the mounting option needed for your trailer setup. Verify size, voltage, wiring, mounting method, mounting hole spacing, and trailer light function before installation.
Maxxima M63350-R red LED stop tail brake light pair, M63350R-LOTOF2, two Maxxima red oval LED trailer lights, ultra thin 6.5 inch red LED brake light, 3 wire 6 inch lead trailer light, low profile trailer stop tail light, red LED trailer brake light, 12.8 VDC trailer lighting, DOT SAE red oval LED light, grommet tape screw mount trailer light.
