Cargo Control / Wheel Tie-Down / Vehicle Hauling
Cargo Control 2" x 10' Adjustable Trailer Wheel Lashing Strap with Ratchet and Rubber Grips
Adjustable wheel lashing strap for securing vehicles, ATVs, and similar wheeled cargo where the strap length, working load limit, and tie-down points match the application.
Part Number: ADJ-2R10WL 2" Width x 10' Length 3,333 lb WLL Per Strap
Specifications
| Specification |
Detail |
| Part Number |
ADJ-2R10WL |
| Brand |
Cargo Control |
| Product Type |
Adjustable wheel lashing strap with ratchet and rubber grip strips |
| Application |
Vehicle wheel tie-down / cargo control |
| Width |
2" |
| Length |
10' |
| Working Load Limit |
3,333 lbs per strap |
| Break Strength |
10,000 lbs |
| Color |
May vary |
Fitment / Application
| Category |
Details |
| Vehicle / System |
Vehicle hauling and wheel tie-down applications |
| Primary Fit |
Cars, trucks, ATVs, and similar wheeled cargo where strap size and working load limit are appropriate |
| Anchor Points |
Use with compatible tie-down points, anchor points, stake pockets, or rub rails as applicable |
| Notes |
Verify load requirements, tire size, tie-down angle, anchor point rating, and trailer securement method before use. |
Overview
This Cargo Control adjustable wheel lashing strap is designed to help secure wheeled cargo during transport. The 2" x 10' strap includes a ratchet and rubber grip strips to help reduce strap movement across the tire surface. It is commonly used for hauling cars, trucks, ATVs, and other compatible vehicles where proper tie-down points and load ratings are verified before use.
R&P Service Insight
Wheel lashing straps are only as safe as the full securement setup. Always match the strap rating to the cargo, confirm the anchor points are rated for the load, and check the strap path before transport.
-
Load Rating: Working load limit is 3,333 lbs per strap; never exceed the lowest-rated component in the tie-down system.
-
Grip Control: Rubber grip strips help reduce strap movement across the tire during tightening and transport.
-
Secure Routing: Run the strap properly over the tire and tighten with the ratchet until secure without twisting or damaging the webbing.
R&P Knowledge Hub
Compatibility: Suitable for vehicle wheel tie-down applications where a 2" x 10' adjustable wheel strap and 3,333 lb working load limit match the job.
Vehicle / System Fit: Used for securing cars, trucks, ATVs, and similar wheeled cargo to compatible trailer tie-down points.
Installation Notes: One strap is typically routed over the tire and tightened with the ratchet to approved tie-down or anchor points. Verify routing, tie-down point rating, and load securement requirements before transport.
Performance Insight: The adjustable design helps position the strap over the wheel while rubber grip strips help reduce movement during tightening and travel.
Brand & Fitment Note
Selling Brand: Cargo Control
Application Reference: Vehicle examples in this listing describe general cargo securement applications only. Actual suitability depends on vehicle weight, tire size, tie-down point location, and anchor point rating.
What This Means: This listing is for one adjustable wheel lashing strap with ratchet and rubber grip strips.
Before Ordering: Verify strap width, strap length, working load limit, break strength, tie-down method, and anchor point compatibility before use.
R&P Repair Insight
Before every haul, inspect the entire strap assembly. Cargo straps should not be used if the webbing, stitching, ratchet, or grip area shows damage that could affect securement.
-
Webbing Check: Inspect for cuts, frays, abrasion, chemical damage, burns, or stretched areas before use.
-
Ratchet Check: Confirm the ratchet locks, releases, and tensions smoothly before loading the vehicle.
-
Fit Check: Confirm the strap sits properly on the tire and does not rub against sharp edges, body panels, brake lines, or suspension components.
Features
2" x 10' Adjustable Strap
Wide 2" webbing and 10' length provide a practical setup for many vehicle wheel tie-down applications.
Ratchet Included
Ratchet design allows the strap to be tightened securely after it is routed over the tire and connected to compatible anchor points.
Rubber Grip Strips
Grip strips help decrease strap movement across the tire surface during securement.
Vehicle Hauling Use
Designed for securing cars, trucks, ATVs, and similar wheeled cargo when rating and tie-down configuration are correct.
Included Components
| Quantity |
Item |
| 1 |
2" x 10' adjustable wheel lashing strap |
| 1 |
Ratchet |
| Included |
Rubber grip strips on strap |
| Not Included |
Tire, vehicle, trailer, anchor points, and additional tie-down hardware |
Tire not included. Strap color may vary. Always verify cargo weight, tire fit, anchor point rating, strap angle, working load limit, and local cargo securement requirements before transport. Do not use any strap that shows cuts, fraying, damaged stitching, or ratchet malfunction.
ADJ-2R10WL wheel lashing strap, 2 inch x 10 foot wheel strap, adjustable wheel strap with ratchet, cargo control wheel tie down, vehicle hauling strap, ATV wheel strap, car tie down strap with rubber grips, 3333 lb WLL wheel strap, 10000 lb break strength wheel strap
