5.6" Front Hanger – 2" Wide Slipper Springs – 9/16" Bolt – 3500–9000 lb Axles
Front hanger designed for use with 2" wide slipper springs on trailer suspension systems. Commonly used on trailers equipped with 3,500 lb to 9,000 lb axles.
Constructed for weld-on installation to trailer frame. Uses 9/16" diameter spring bolt (not included).
Listing is for ONE front hanger.
R&P Knowledge Hub
Slipper spring suspension systems use a fixed front hanger and a rear slipper-style support bracket. The front hanger secures the eye end of the slipper spring using a spring bolt.
Correct hanger height directly affects ride height and axle positioning. Always verify overall hanger height, center-of-bolt dimension, and spring width (2") before installation. Bolts and hardware are not included unless otherwise specified.
Features
- Designed for 2" wide slipper springs
- 5.6" overall hanger height
- 5" from center of bolt hole to top of hanger
- 2.5" pad height
- 3" hanger length
- Uses 9/16" spring bolt (not included)
- For 3,500–9,000 lb trailer axles
Specifications
| Specification | Detail |
| Spring Width Compatibility | 2" |
| Overall Height | 5.6" |
| Center of Hole to Top | 5" |
| Pad Height | 2.5" |
| Length | 3" |
| Bolt Size | 9/16" (Not Included) |
| Axle Rating Compatibility | 3,500 lb – 9,000 lb |
Verify hanger height and spring width before installation.
