Replacement Trailer Sway-Control Bracket for 2" Ball Mounts
Replacement sway-control bracket designed for compatible 2" x 2" Class III and Class IV ball mounts using friction-style sway control systems.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number | 26003 |
| Product Type | Sway-control replacement bracket |
| Ball Hitch Hole Diameter | 1" |
| Bracket Thickness | 3/8" |
| Ball Hole to Sway-Control Point | 5-1/2" |
| Material / Finish | Powder-coated steel |
| Quantity Included | 1 bracket |
Fitment / Application
| Category | Details |
|---|---|
| System Type | Friction-style trailer sway control systems |
| Primary Fit | 2" x 2" Class III and Class IV ball mounts |
| Fitment Method | Verify ball mount size, 1" ball hole, bracket position, and sway-control system compatibility before ordering. |
| Important Note | This listing is for the replacement bracket only. Sway-control system, hitch ball, ball mount, and related hardware are sold separately unless specifically stated. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| 2" Ball Mount Fit | Designed for compatible 2" x 2" Class III and Class IV ball mounts. |
| Friction Sway Use | Provides a mounting point for friction-style trailer sway control systems. |
| Powder-Coated Steel | Helps resist corrosion during normal trailer and towing use. |
| Replacement Component | Useful when replacing a missing, damaged, or worn sway-control bracket. |
Overview
This replacement sway-control bracket is designed for compatible 2" x 2" ball mounts used with friction-style trailer sway control systems. It features a 1" ball hitch hole, 3/8" bracket thickness, and a 5-1/2" measurement from the ball hole to the sway-control mounting point.
R&P Service Insight
Sway-control brackets need to match the hitch setup and the sway-control arm being used. Before ordering, compare your existing bracket measurements and check that your ball mount and sway-control system use the same layout.
- Confirm Ball Mount Size: Intended for compatible 2" x 2" Class III and Class IV ball mounts.
- Check Hole Size: The ball hitch hole diameter is 1".
- Verify Position: Measurement from ball hole to sway-control point is 5-1/2".
R&P Knowledge Hub
Compatibility: Designed for compatible 2" x 2" Class III and Class IV ball mounts used with friction-style sway control systems.
Vehicle / System Fit: Trailer hitch sway-control applications where bracket size, hole diameter, and mounting position match the existing setup.
Installation Notes: Proper positioning and torque are important for sway-control performance. Always follow the sway-control system manufacturer’s installation instructions.
Performance Insight: A friction sway-control system helps reduce trailer sway caused by wind, road conditions, passing traffic, and speed-related movement when the towing setup is properly matched and installed.
Brand & Fitment Note
Selling Brand: Not specified
Application Reference: This bracket is listed by part number 26003 for compatible 2" ball mount sway-control applications.
What This Means: This listing is for one replacement sway-control bracket, not a complete sway-control system.
Before Ordering: Verify your ball mount size, hitch ball hole diameter, bracket thickness, mounting position, sway-control system style, and included components before installation.
R&P Repair Insight
If your trailer sway-control setup is loose, incomplete, or missing the ball mount bracket, compare your current system before replacing parts. The bracket must match the ball mount and the friction sway-control arm location.
- Check the Ball Mount: Confirm your ball mount is a compatible 2" x 2" Class III or Class IV style.
- Measure First: Match the 1" ball hole and 5-1/2" ball-hole-to-sway-control measurement before ordering.
- Inspect the System: If the sway-control arm, small sway ball, or mounting hardware is worn or missing, additional parts may be needed.
Features
Fits Compatible 2" Ball Mounts
Designed for compatible 2" x 2" Class III and Class IV ball mounts used in trailer towing applications.
For Friction Sway Control
Provides the bracket mounting point needed for compatible friction-style sway-control systems.
Powder-Coated Steel Construction
Powder-coated steel finish helps protect the bracket from corrosion during normal use.
Replacement Bracket Only
Useful for replacing a missing or damaged sway-control bracket without purchasing a full sway-control kit.
Included Components
| Quantity | Item |
|---|---|
| 1 | Replacement sway-control bracket, part number 26003 |
| Not Included | Friction sway-control system, hitch ball, ball mount, sway ball, and installation hardware unless shown or stated separately |
