Cargo Control / E-Track Tie-Down Hardware
Brophy Zinc-Plated 3/8" O-Ring Trailer Tie-Down Fitting for E-Track 5,500 lb
All-metal E-Track O-ring fitting for adding a movable tie-down point to compatible E-Track systems. Zinc-plated construction, 5,000 lb listed capacity, and single-piece spring fitting design for cargo control applications.
Part Number: ETR6 5,000 lb Listed Capacity Zinc-Plated E-Track Fitting
Key Measurements & Specs
| Specification |
Detail |
| Part Number / SKU |
ETR6 |
| Brand |
C.R. Brophy / Brophy |
| Product Type |
E-Track O-ring tie-down fitting |
| Listed Ring Size |
10mm listed O-ring size |
| Listed Capacity |
5,000 lb |
| Material / Finish |
All-metal construction / zinc finish |
| Quantity Included |
1 E-Track O-ring fitting |
Fitment / Application
| Category |
Details |
| Vehicle / Trailer / System |
E-Track cargo control systems |
| Primary Fit |
Designed to fit standard E-Track rail slots |
| Common Use |
Creates a removable tie-down point for cargo straps, hooks, and other compatible cargo-control hardware |
| Fitment Method |
Verify the trailer, van, or cargo area uses E-Track rail and that the fitting locks securely into the track before use |
| Important Note |
Capacity depends on proper E-Track installation, mounting hardware, rail condition, load angle, and the full tie-down system being used |
Top Features
| Feature |
Buyer Benefit |
| E-Track Compatible |
Adds a movable anchor point to standard E-Track systems |
| All-Metal Build |
Durable construction for cargo control and tie-down use |
| Zinc Finish |
Helps resist corrosion in enclosed trailer, truck, and cargo applications |
| 5,000 lb Listed Capacity |
Suitable for properly matched cargo-control systems where the complete setup is rated for the load |
Overview
The Brophy ETR6 is a zinc-plated O-ring tie-down fitting made for E-Track cargo control systems. It gives you a removable attachment point for securing cargo in enclosed trailers, vans, trucks, toy haulers, utility trailers, and other properly equipped cargo areas using standard E-Track rail.
R&P Service Insight
E-Track fittings are only as strong as the complete tie-down system. Always consider the rail, fasteners, mounting surface, strap, hook, load angle, and working load limit before securing cargo.
-
Track Check: Confirm the fitting locks fully into the E-Track slot and does not pull loose before loading.
-
System Rating: The lowest-rated component in the tie-down setup determines the usable limit.
-
Load Direction: Avoid shock loading, side loading, or using the ring beyond the limits of the installed E-Track system.
R&P Knowledge Hub
Compatibility: Designed for use with standard E-Track systems. Verify rail style and secure engagement before use.
Vehicle / System Fit: Commonly used in enclosed trailers, cargo trailers, work vans, box trucks, utility trailers, and other cargo areas equipped with E-Track rail.
Installation Notes: No separate mounting hardware is included for the fitting itself. The E-Track rail must already be properly installed and rated for the cargo application.
Performance Insight: A removable O-ring fitting lets you reposition tie-down points along the rail as load sizes and strap angles change.
Brand & Fitment Note
Selling Brand: C.R. Brophy / Brophy
Application Reference: E-Track references describe the cargo-control rail system this fitting is designed to work with.
What This Means: This listing is for one Brophy ETR6 E-Track O-ring tie-down fitting, not a full E-Track rail kit or strap assembly.
Before Ordering: Verify your track style, load requirements, tie-down method, and complete system rating before use.
R&P Repair Insight
If an E-Track fitting does not lock in cleanly, inspect the track slot and spring mechanism before using it. Dirt, bent rail edges, damaged slots, or worn fittings can prevent a safe lockup.
-
Locking Fit: Make sure the spring fitting snaps fully into place and cannot slide out of the track under hand pressure.
-
Track Condition: Do not use with bent, cracked, rusted-through, or poorly mounted E-Track rail.
-
Load Match: Match the ring, strap, hook, and rail rating to the actual cargo being secured.
Features
Fits E-Track Systems
Designed to engage standard E-Track rail slots and create a movable cargo tie-down point.
All-Metal Construction
Durable metal fitting and O-ring design for cargo-control applications.
Zinc-Plated Finish
Zinc finish helps protect the fitting in common trailer, van, and cargo environments.
5,000 lb Listed Capacity
Built for properly rated tie-down systems where the complete setup is matched to the load being secured.
Included Components
| Quantity |
Item |
| 1 |
Brophy ETR6 zinc-plated O-ring fitting for E-Track |
| Not Included |
E-Track rail, mounting hardware, straps, hooks, chains, or additional cargo-control accessories |
Important Fitment Note: Verify E-Track rail style, rail mounting, fastener strength, load angle, strap rating, hook compatibility, and the complete cargo-control system before use. The listed capacity applies only when the entire system is properly matched, installed, and used within rating.
Brophy ETR6 E-Track O-ring fitting, Brophy ETR6 tie-down ring, zinc plated E-Track fitting, 5000 lb E-Track O-ring, cargo control O-ring fitting, enclosed trailer E-Track tie down, C.R. Brophy ETR6, E-Track anchor ring, trailer cargo tie-down fitting, removable E-Track O-ring.
