At a Glance

> Surface Prep: Clean dirt, wax, oil, and loose material before applying tape.
> Placement: Confirm where red tape is appropriate for your trailer, truck, camper, or equipment.
> Quantity: This listing is for one roll. Order additional rolls by increasing the quantity before checkout.
> Check Existing Tape: Look for fading, peeling edges, cracking, missing sections, or poor night reflection.
> Check Surface: Apply to a stable surface that is clean, dry, and free from loose paint or debris.
Brand: Need A Trailer Part®
SKU: LPCDRD-2

Before You Order

Match the part number, measurements and connection points that apply to your trailer.

Opening	Measure the existing roof or wall opening.
Flange	Confirm overall and flange dimensions.
Operation	Confirm powered, manual or fixed operation.
Mount / Power	Verify mounting and electrical requirements.

Product Details

Trailer Visibility / Reflective Safety Tape

DOT 2" Red Construction Tape 50 Yard Roll Highly Reflective Trailer RV Camper

Highly reflective red construction tape roll for trailer, RV, camper, truck, equipment, and general visibility marking applications. This listing is for one brand-new 50-yard roll measuring 2 inches wide.

Part Number: LPCDRD-2 2" Wide 50 Yard Roll

Key Measurements & Specs

Specification	Detail
Part Number / SKU	LPCDRD-2
Product Type	Highly reflective red construction tape roll
Width	2"
Roll Length	50 yards
Color	Red
Quantity Included	One roll

Fitment / Application

Category	Details
Common Uses	Trailers, RVs, campers, trucks, equipment, shop marking, and visibility applications
Primary Fit	Universal cut-to-length reflective tape application
Fitment Method	Verify tape width, color, required length, and intended surface before ordering
Important Note	Confirm the tape color and placement requirements for your specific trailer, vehicle, or job before installation.

Top Features

Feature	Buyer Benefit
Highly Reflective	Helps improve visibility when light hits the marked surface
Red Tape	Useful for rear, side, equipment, and warning-area visibility marking where red tape is needed
2" Wide Roll	Common width for trailer and vehicle visibility applications
50 Yard Length	Bulk roll allows trimming to the length needed for the job

Overview

This LPCDRD-2 listing is for one brand-new roll of highly reflective red construction tape. The roll measures 2" wide and 50 yards long, making it a practical option for trailers, RVs, campers, trucks, equipment, and general safety visibility marking. Cut the tape to the needed length for your application and verify the intended placement before installation.

R&P Service Insight

Reflective tape is commonly replaced when old tape becomes faded, damaged, peeling, missing, or difficult to see at night. Before installing new tape, make sure the surface is clean, dry, and ready for adhesive application.

Surface Prep: Clean dirt, wax, oil, and loose material before applying tape.
Placement: Confirm where red tape is appropriate for your trailer, truck, camper, or equipment.
Quantity: This listing is for one roll. Order additional rolls by increasing the quantity before checkout.

R&P Knowledge Hub

Compatibility: Universal cut-to-length tape for visibility marking where a 2" wide red reflective tape is suitable.

Vehicle / System Fit: Commonly used on trailers, RVs, campers, trucks, equipment, and general marking applications.

Installation Notes: Verify your color, width, placement, and total tape length needed before ordering. Apply only to a clean, dry surface.

Performance Insight: Reflective tape helps make marked surfaces easier to see when illuminated by headlights or work lights, especially in low-light conditions.

Brand & Fitment Note

Selling Brand: R&P Carriages / NeedATrailerPart.com listing

Application Reference: Trailer, RV, camper, truck, equipment, and general construction or safety visibility applications.

What This Means: This listing is for one roll of LPCDRD-2 highly reflective red tape. Manufacturer branding is not specified in the provided listing information.

Before Ordering: Verify tape width, color, total length, surface condition, and placement requirements before installation.

R&P Repair Insight

When refreshing trailer or equipment visibility markings, replace damaged sections completely instead of patching over loose or peeling tape. Old adhesive residue, dirt, and uneven surfaces can prevent new tape from bonding properly.

Check Existing Tape: Look for fading, peeling edges, cracking, missing sections, or poor night reflection.
Check Surface: Apply to a stable surface that is clean, dry, and free from loose paint or debris.
Check Requirements: Make sure red tape is correct for the location you are marking before cutting and applying.

Features

Highly Reflective Red Tape

Designed for visibility marking where red reflective tape is needed on trailers, campers, equipment, trucks, or job-site applications.

2" Wide Format

The 2" width is a common size for trailer and vehicle visibility layouts.

50 Yard Roll

Bulk roll length allows the tape to be cut to fit multiple sections or larger marking jobs.

Order the Quantity Needed

This listing is priced for one roll. Additional rolls can be purchased by increasing the quantity before checkout.

Included Components

Quantity	Item
1	LPCDRD-2 highly reflective red construction tape roll, 2" wide x 50 yards long
Not Included	Surface prep supplies, tools, cleaners, or installation accessories

Important Verification Note: This listing is for one roll of red highly reflective tape. Verify your required tape color, width, total length, placement, surface condition, and any applicable trailer or vehicle marking requirements before ordering or installation.

Shop Trailer Lighting & Visibility Parts

LPCDRD-2 DOT construction tape red reflective tape 2 inch wide 50 yard roll trailer reflective tape RV camper truck equipment visibility marking red safety tape highly reflective red tape roll R&P Carriages NeedATrailerPart.com

DOT 2" Red Construction Tape 50 Yard Roll Highly Reflective Trailer RV Camper (LPCDRD-2)