Trailer Hardware

3 Replacement Cargo Trailer Ramp Door Rubber Bumpers (J-B1-LOTOF3)

Replacement Round Rubber Cargo Trailer Door Bumpers – Qty 3 This listing is for a set of three round rubber bumpers commonly used on enclosed cargo trailer doors. These bumpers help cushion and protect trailer doors when closed. Features Round rubber door bumpers Commonly used on enclosed cargo trailers Black rubber construction Sold as a...

SKU J-B1-LOTOF3 Brand Jammy

$8.12

● IN STOCK

11" Slipper Spring Equalizer with Bolts and Nuts - (TH-XM02-2AKE)

11" Slipper Spring Equalizer Kit

SKU TH-XM02-2AKE Brand Need a Trailer Part

$36.58

● IN STOCK

Brake Shoe Left 12.25x3.375 Hydraulic fits Dexter 8K 10K Trailer Axle 9-44 9-123 (77S-1210H-1)

Replacement Brake Shoe Pads for 12-1/4x3-3/8 Hydraulic Brakes fits Dexter Axles 9-44 9-123 and 8,000# Dexter & LCI Hydraulic brakesPart Number: 77S-1210H-1(Replaces Dexter K71-437-00)Listing Contains:1x Primary Replacement Pad1x Secondary Replacement PadSpecs:12-1/4 x 3-3/8Fits 8k, 9k, 10k General DutyCompatible with 9-123, 9-44 DrumsMade for Hydraulic Braking SystemsThis listing is for ONE Left Hand Replacement Brake ShoesFits Dexter Part...

SKU 77S-1210H-1 Brand R and P Carriages

$60.26

● IN STOCK

Electric Brake Assembly Right Hand 10 x 2-1/4 for 4,400 lb Axles New Style Flange (K23-479-00)

Trailer Brake Assembly / Electric Brake / 4,400 lb Axle Electric Brake Assembly Right Hand 10 x 2-1/4 for 4,400 lb Axles New Style Flange K23-479-00 Right-hand electric brake assembly for trailer applications using a 10 inch x 2-1/4 inch backing plate size and new style flange on 4,400 lb axles. Includes hex head nuts...

SKU K23-479-00 Brand Dexter

$205.75

● IN STOCK

7 Way Molded 4 Trailer Wire Light Plug Cord Connector RV Flat Blade Camper (MP7WY-4)

7 Way Molded 4' Trailer Wire Light Plug Cord Connector RV Flat Blade Camper Part Number - MP7WY-4 This is an 4 Foot long Cord This cord is conveniently featured with double heavy duty gauge wires and double contact copper contacts. This will ensure that this cord will work even in the cold winter weather!...

SKU MP7WY-4 Brand LaVanture

$20.93

● IN STOCK

4- Trailer axle spring perch/seat for 2.3/8" 3500# Round axel tube mount Pad (SP-2.375-LOTOF4)

Spring Perch / Seat for 2-3/8" Round Trailer Axles — 3,500 lb (4-Pack) Part Number: SP-2.375-LOTOF4 Set of four (4) weld-on spring perches designed for 2-3/8" diameter round trailer axle tubes. Commonly used when installing or replacing spring seats on 3,500 lb capacity trailer axles. Features Designed to fit round trailer axle tubes Weld-on installation...

SKU SP-2.375-LOTOF4 Brand R & P Carriages

$27.25

● IN STOCK

Dexter 1in Hardened Spindle Washer For 50MM Nev-R-Lube Axles (005-149-00)

Backing Plate Brake Flange – 5 Hole, 2.56" Pilot, B Type (5200–7000 lb) Part Number: 004-052-00 This backing plate brake flange is designed for use with trailer brake assemblieson B type axles commonly found in 5,200 lb, 6,000 lb, and 7,000 lb trailer axleapplications. The flange provides the mounting surface required to install electricor hydraulic...

SKU 005-149-00 Brand Dexter

$14.36

● IN STOCK

4X Flat Strut Mount Bracket 13MM Ball Gas Spring Prop Rod Camper RV Truck (LPB1313-4)

4X Gas Strut Bracket for 13MM StrutsPart Number: LPB1313This is the bracket used in our larger struts, the 280 and 3100 series (and any strut with the 13MM ball )This is a Heavy duty item with thick 14 Gauge platePrice is for one, put the number you need in the box next to the buy...

SKU LPB1313-4 Brand Unbranded

$10.71

● IN STOCK

Add Brakes to Your Trailer Complete Kit 3500 axle 6 x 5.5 Bolt Electric 10" Drum (94655-B-IMP)

Add Brakes to Your Trailer Complete Kit 3500 axle 6 x 5.5 Bolt Electric 10" Drum without battery Part Number - 94655-B-IMP This will let you add electric brakes to your trailer. This kit includes the following:(2) 6 lug x 5.5" bolt pattern drums (94655-1) 10" diameter drums 1/2"-20 studs 1-1/4" long 12 lug nuts are included...

SKU 94655-B-IMP Brand Need A Trailer Part®

$212.60

● IN STOCK

Two -Piece Nylon Spring Eye Bushing – 0.57" ID x 1.31" OD x 1" Long, Fits 014-054-01 / 14-54 / SP05-080 (9000298)

Nylon Bushing Two -Piece Nylon Spring Eye Bushing – 0.57" ID x 1.31" OD x 1" Long, Fits 014-054-01 / 14-54 / SP05-080 Nylon bushing listing with 9/16" inside diameter, 2" length, and 1.31" outside diameter. Part number 9000298; Dexter part number reference 014-054-01. Part Number: 9000298 Dexter Part Number: 014-054-01 2 x Nylon Bushings...

SKU 9000298 Brand R & P Carriages

$10.99 — Sold Out

UNAVAILABLE VIEW DETAILS

2-1/8 x 5-3/8 Square U-bolt Trailer Axle Suspension 1/2" Diameter w/ Nuts (32443-KIT)

2-1/8" x 5-3/8" Square U-Bolt Trailer Axle Suspension 1/2" Diameter w/ Nuts (32443-KIT) Part Number: 32443-KIT Square U-bolt kit designed to secure trailer axles to leaf spring suspension plates. Sized for 2-1/8" wide axles with 5-3/8" leg height, commonly used on square tube axle setups. Includes two 1/2" diameter U-bolts with matching nuts. R&P Knowledge...

SKU 32443-KIT Brand R & P Carriages

$3.87

● IN STOCK

The Ultimate Rapid Adjusting Drop Leg Top Wind 2000# Trailer Jack (322-RDJ-2K)

Ultimate Trailer Jack – 2000 lb Capacity Part Number: 322-RDJ-2K Heavy-duty trailer jack designed for fast adjustment, smooth operation, and reliable lifting performance with a durable zinc-coated finish for long-term use. R&P Knowledge Hub Trailer jacks support tongue weight and allow height adjustment for hitching. Rapid-adjust designs reduce cranking time, while internal bearings improve efficiency...

SKU 322-RDJ-2K Brand Ultimate Trailer Jack

$102.99

● IN STOCK

7 Way Round to 5 Pin Flat Trailer Plug Light Adapter RV Connector Boat RV (F75F)

7 Way Round to 5 Pin Flat Trailer Plug Light Adapter RV Connector Boat RVPart Number - F75FYou are looking at a special trailer plug adapter I sell which will allow you to pull a trailer with the 5 way flat plug, even though your truck has the 7 way round plug found on some...

SKU F75F Brand Brophy

$10.88

● IN STOCK

2,000# A-Frame 2" Jack W/ 12" tall Drop Leg Sand Foot Pad Camper Trailer Tongue (EA2000 + JF1005HZ)

2,000# lb. Top Wind A-Frame Drop Leg JackWITH 12" Drop leg! Part Number - EA2000 + JF1005HZ NO MORE BLOCKS OF WOOD OR CRANKING FOREVER!Just pull the pin, the foot drops down, pin it back and jack it down!(These jacks are made by Cequent Group, the maker of Fulton, Bulldog, etc. so the "name sticker" on...

SKU EA2000 + JF1005HZ Brand Cequent

$77.17

● IN STOCK

7 way trailer truck plug, rubber gasket & bumper mount (F7DC)

7 way trailer truck plug rubber gasket & bumper mountPart Number - F7DC Tow vehicle mount with spring loaded cover Accepts 7 way round female end from trailer/camper/rv Weather resistant with rubber gasket Wiring from tow vehicle connects to this plug Mounts to bumper (screws not included)

SKU F7DC Brand Need A Trailer Part®

$12.71

● IN STOCK

Trailer Brake Backing Plate Flange 3500# Axle 2.27" 4 HOLE bolt square bracket (004-035-00)

4-Bolt Trailer Brake Backing Plate Flange – 2.27" Center Hole Part Number: 4-35 (004-035-00) Heavy-duty 4-bolt square brake backing plate flange designed for use when adding electric drum brakes to an axle that does not already have a welded brake flange. This flange must be welded to the axle tube. Features High-grade steel construction Standard...

SKU 004-035-00 Brand R & P Carriages

$16.41

● IN STOCK

8 – 2 x 4 Weld-On Steel Stake Pockets (7-Gauge / 3?16") (STK-7GA-8)

8 – 2 x 4 Weld-On Steel Stake Pockets (7-Gauge / 3?16") Part Number – STK-7GA-8 This 8-pack of heavy-duty weld-on stake pockets is built from 7-gauge (3/16") formed steel,ready for fabrication, trailer upgrades, or full sidewall builds. Each pocket accepts standard2×4 lumber and is widely used for removable rail systems, cargo containment, tie-down points,and...

SKU STK-7GA-8 Brand Need A Trailer Part®

$27.28

● IN STOCK

1/4" Trailer Safety Chains Camper RV 5000# Rated with Latching S Hooks (TCL2)

1/4" x 48" chain with 7/16" S-hooks with latching S hooks Part Number - TCL2 This auction is for one Trailer Safety Chain With [1] S Hooks with latch on each end Designed to keep trailer connected to vehicle if hitch fails or comes uncoupled. Bright zinc finish. 48" chain - overall length is...

SKU TCL2 Brand R and P Carriages

$20.58

● IN STOCK

Spindle End Kit 9k-10k General Duty Trailer Axle After 10/89 (WK-10K)

Trailer Axle Spindle End Kit for 9K-10K General Duty After 10/89 Part Number: WK-10KThis Listing Does 1 Wheel. You will need 2 kits to do 1 complete axle.Features: Fits 9k-10k GD (General Duty) with 1-1/2" Spindle 2-1/4" Wrench (socket) sizeDirect Replacement for K71-367-00-RPKit Includes: 1 x 1-1/2" ID Tang Washers (005-071-00) 1 x Tongue...

SKU WK-10K Brand Need A Trailer Part®

$17.74

● IN STOCK

3500# Basic Brake Kit 5 x 4.75 Drum Forward Self-Adjusting 10" Backing Plates Trailer Camper RV(945475-B-FSA-IMP)

Basic Brake Kit 5 x 4.75 Drum Forward Self-Adjusting 10" Backing Plates Part Number: 945475-B-FSA-IMPKit Includes:1 X 5X4.75 3500# Drum W/10" Right Hand Electric Backing Plate 1 X 5X4.75 3500# Drum W/10" Left Hand Electric Backing Plate 2 X Inner Bearings L68149 (1-3/8" ID)2 X Outer Bearings L44649 (1-1/16" ID)2 X Grease Seals 10-19 (1-34" ID)2...

SKU 945475-B-FSA-IMP Brand Unknown

$232.99

● IN STOCK

(4361-60) Leaf Spring, Slipper, Flat, 32.5" Long, 6 Leaf, 6000# Rated, 2.50" Wide, 43101-60, 3/4" eye Rockwell ALKO

6,000 LB Leaf Spring SlipperPart Number: 4361-6032.5" Long6 Leaf6000# Rating2.50" Wide3/4" Eye

SKU 4361-60 Brand Need A Trailer Part®

$147.37

● IN STOCK

5 Dexter Mobile Home Wheel Bolts 1/2"-13 fits 8-261-04 Hub Trailer 1.62" Long (7-36-LOTOF5)

5 Dexter Mobile Home Hub Wheel Bolts 1/2"-13 fits 008-261-04 Hub Part Number: 7-36-LOTOF5This kit contains: 5x Wheel BoltsSpecs:1/2"-13 1.62" Long (Under Head of Bolt to Threads)Fits 008-261-04 Mobile Home Hub 4000#

SKU 7-36-LOTOF5 Brand Dexter

$10.93

● IN STOCK

Silver Grey Swivel Cam Bar Trailer Latch Handle Door Cambar Cargo W/ Gray Lock (CB-GRY-CBLG)

Silver Powder Coated Swivel Bar Cambar with Grey/Silver LockPart Number: CB-GRY-CBLG CAMBARFeatures: - Foam Pad, reducing wear and tear on your trailer- Easy two hole installation- 180+ degree Swivel- Powder Coated for Long lasting finishSpecifications:- Mounting Holes: 4-5/8" On Center- Mounting Bracket: 5-3/4" x 1-3/8"- Cambar Arm: 13" Long Overall, 1-1/2" WideCambar LockFeatures Grey/Silver powder coat...

SKU CB-GRY-CBLG Brand RV Locks & More

$40.57

● IN STOCK

12-1/4" x 4" Electric Trailer Backing Plate – 10K HD – Right Hand – 7 Bolt (BK-10HDE-02)

Trailer Brake Assembly / Heavy Duty Running Gear 12-1/4" x 4" Electric Trailer Backing Plate – 10K HD – Right Hand – 7 Bolt Heavy duty right-hand electric trailer brake assembly for 12-1/4" x 4" 10,000 lb HD drum brake applications using a 7-bolt brake mounting flange. Part Number: BK-10HDE-02 12-1/4" x 4" Right /...

SKU BK-10HDE-02 Brand R & P Carriages

$135.42

● IN STOCK