2-Pack Brophy LRB5 3/8" Bolt-On D-Ring Tie Down Anchors 6,000 lb Zinc
Two heavy-duty surface mount D-ring anchors designed for secure cargo restraint. Forged steel construction with zinc-plated finish for strength, corrosion resistance, and dependable trailer or truck-bed tie-down performance. Important Note: Please refer to measurement visual in the listing photos.
Overview
This LOT OF 2 Brophy LRB5 set gives you two matching bolt-on D-ring anchor points for trailer floors, truck beds, flat-bed surfaces, or properly reinforced cargo-control mounting locations. The surface-mount design allows installation without cutting large recessed openings, making this pair useful for creating left/right anchor points or adding secure tie-down locations where needed.
R&P Service Insight
When mounting tie-downs, your anchor is only as strong as the surface it is attached to. We always recommend bolting through a structural frame member or properly reinforced backing structure for maximum safety.
- Mounting Holes: Each anchor features 7/16" square holes designed specifically for 3/8" carriage bolts.
- Finish: Zinc plating provides strong protection against road salt, moisture, and general trailer use.
- Safety: Each anchor has a 2,000 lb Working Load Limit when installed and used properly within rated limits.
R&P Knowledge Hub
Compatibility: Surface-mount bolt-on D-ring anchors for trailer floors, truck beds, flat-bed surfaces, and other properly reinforced flat mounting locations.
Vehicle / System Fit: Designed for cargo control applications where paired heavy-duty tie-down points are needed for equipment, ATVs, tools, and heavy loads.
Installation Notes: Please refer to the measurement visual in the listing photos. Verify bracket size, bolt hole spacing, bolt size, and mounting surface before installation.
Performance Insight: Each forged 3/8" steel ring and zinc-plated bracket provides strength, durability, and corrosion resistance for regular trailer and cargo-control use.
Brand & Fitment Note
Selling Brand: Brophy
Application Reference: This listing describes a 2-pack of bolt-on D-ring anchors for cargo securement applications where measurements, mounting points, and installation surfaces are appropriate.
What This Means: This listing is for two Brophy LRB5 3/8" bolt-on D-ring tie down anchors.
Before Ordering: Verify bracket dimensions, hole spacing, bolt size, mounting surface strength, required Working Load Limit, and the number of anchors needed for the cargo being secured.
R&P Repair Insight
Tie-down hardware should be selected and installed as part of the full cargo-control system. The anchors, fasteners, backing structure, straps, and mounting surface all work together to determine real-world securement strength.
- Surface Check: Do not rely on thin sheet metal, weak decking, or damaged trailer flooring as the only support for a heavy tie-down point.
- Fastener Check: The square bracket holes are designed for 3/8" carriage bolts; confirm bolt length, grade, backing, and nut/washer setup for your installation.
- Load Check: Choose tie-down rings according to their safe Working Load Limit and the weight of the cargo being secured.
Key Features
Lot of 2 Matching Anchors
Includes two Brophy LRB5 bolt-on D-ring anchors, ideal for paired left/right cargo-control points or adding multiple securement locations.
Surface Mount Design
Bolts directly onto flat surfaces; no recessed routing or large cutout required for installation.
3/8" Forged Steel Rings
Forged steel loops offer high tensile strength and resist bending under load when used within rated limits.
Corrosion Resistant
Bright zinc plating helps protect the anchors from moisture, road grime, and regular outdoor trailer use.
Specifications
| Specification | Detail |
|---|---|
| Part Number | LRB5 |
| Listing SKU | LRB5-LOTOF2 |
| Brand | Brophy |
| Product Type | Bolt-On D-Ring Tie Down Anchor - 2 Pack |
| Quantity Included | 2 D-ring anchor assemblies |
| Application | Trailer floors, truck beds, flat-bed surfaces, cargo-control mounting points |
| Ring Diameter | 3/8" each |
| Break Strength | 6,000 lbs each |
| Working Load Limit | 2,000 lbs each |
| Material / Finish | Zinc Plated Forged Steel |
| Bolt Hole Size | 7/16" square holes; fits 3/8" carriage bolts |
Fitment / Application
| Category | Details |
|---|---|
| Vehicle / System | Trailer cargo-control systems, truck beds, utility trailers, equipment trailers, and flat-bed surfaces |
| Primary Fit | Surface-mount tie-down anchor applications requiring bolt-on D-rings |
| Common Uses | Securing ATVs, equipment, tools, and heavy loads when used with properly rated straps and mounting hardware |
| Notes | Please refer to the measurement visual in the listing photos. Confirm mounting location strength and required WLL before installation. |
Detailed Measurements
| Key Dimension | Measurement |
|---|---|
| (A) Bracket Length | 2 3/4" each |
| (B) Bracket Width | 2 3/4" each |
| (C) Inside Width | 2" each |
| (D) Inside Depth | 2" each |
| (E) Bolt Hole Center | 1 7/8" each |
| Bolt Hole Size | 7/16" square hole; fits 3/8" carriage bolts |
Included Components
| Quantity | Item |
|---|---|
| 2 | Brophy LRB5 bolt-on D-ring tie down anchor assemblies |
| 2 | 3/8" forged steel D-rings |
| 2 | Surface-mount brackets with 7/16" square mounting holes |
| Not Included | Mounting bolts, nuts, washers, backing plates, straps, and installation hardware unless separately shown or stated |
Safety Note
Tie-down rings must be chosen according to their safe Working Load Limit. The weight of the cargo being secured must not exceed the combined WLL of the anchors being used.
Each LRB5 anchor in this 2-pack is rated at a 2,000 lb Working Load Limit when installed and used properly within the full securement system. Using two anchors may provide up to 4,000 lbs combined WLL only when both anchors, mounting surfaces, fasteners, straps, and load angles are properly rated and configured.
