Stone Guard Vinyl – 9" Wide Protective Adhesive Covering, Sold by the Foot
Textured black adhesive vinyl for protecting high-impact trailer and vehicle surfaces from rock chips, abrasions, scratches, and cosmetic wear. Sold by the foot and supplied in one continuous uncut length when multiple feet are ordered, up to approximately 150 ft.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | VGG9 |
| Product Type | Stone guard protective vinyl covering |
| Width | 9 inches |
| Length | Sold by the foot; continuous length when ordering multiple feet |
| Texture / Finish | Black textured protective surface |
| Backing | Adhesive-backed vinyl |
| Quantity Included | 1 linear foot per quantity ordered |
Fitment / Application
| Category | Details |
|---|---|
| Vehicle / Trailer / System | Trailer fenders, front rock guards, steps, truck bed rails, boat trailers, and exposed painted or plastic surfaces |
| Primary Fit | Universal cut-to-length protective covering where a 9" width is appropriate |
| Fitment Method | Measure the surface area before ordering and confirm the required linear footage |
| Surface Prep | Apply to a clean, dry surface free of grease, wax, dirt, and loose debris |
| Important Note | Confirm surface shape, width, length, and adhesion suitability before installation |
Top Features
| Feature | Buyer Benefit |
|---|---|
| 9" Width | Useful size for trailer fenders, steps, rock guards, and other exposed surfaces |
| Textured Black Finish | Helps protect and visually cover worn, scratched, or blemished surfaces |
| Adhesive Backing | Allows straightforward cut-and-apply installation after proper surface preparation |
| Sold by the Foot | Order the length needed for the job without buying a pre-cut panel |
Overview
VGG9 stone guard vinyl is a 9" wide textured black adhesive protective covering used on trailers, truck surfaces, boat trailers, steps, fenders, and other high-impact areas. It provides a protective barrier against everyday road debris, rock chips, abrasions, scratches, and cosmetic wear while also helping cover existing surface blemishes.
R&P Service Insight
Protective vinyl works best when the surface is measured, cleaned, and prepared before application. The material is sold by the foot, so order the total linear footage needed for your application.
- Measure First: Confirm the width and length of the area being covered before ordering.
- Clean Surface: Remove dirt, grease, wax, and loose debris before installation.
- Continuous Length: Multiple feet are supplied as one continuous uncut length when possible, up to approximately 150 ft.
R&P Knowledge Hub
Compatibility: Universal protective vinyl for compatible smooth, clean, dry surfaces where a 9" width and adhesive-backed installation are appropriate.
Vehicle / System Fit: Commonly used on trailer fenders, front rock guards, steps, truck bed rails, boat trailers, and exposed painted or plastic surfaces.
Installation Notes: Test fit before final application. Trim to length as needed and apply only after the surface has been fully cleaned and dried.
Performance Insight: The textured black surface helps provide a protective wear layer while also reducing the visual appearance of scratches, cracks, and cosmetic blemishes underneath.
Brand & Fitment Note
Selling Brand: R&P Carriages
Application Reference: Trailer, truck, boat trailer, fender, step, rock guard, and rail references describe common application areas only.
What This Means: This listing is for 9" wide stone guard vinyl sold by the foot, not a vehicle-specific pre-cut panel unless specifically stated.
Before Ordering: Verify the surface dimensions, desired coverage area, quantity of feet needed, and surface suitability before installation.
R&P Repair Insight
Stone guard vinyl is often used both for protection and cosmetic repair. It can help cover worn or blemished areas, but adhesion and appearance depend heavily on surface condition and preparation.
- Surface Condition: Do not apply over loose paint, flaking material, heavy rust, oil, grease, or wet surfaces.
- Coverage Check: Confirm the 9" width will cover the intended area before ordering.
- Quantity Check: Enter the number of feet required. For example, quantity 6 equals approximately 6 linear feet of material.
Features
9" Protective Width
Designed for applications where a wider strip is needed, including trailer fenders, step surfaces, front rock guards, and bed rail areas.
Textured Black Surface
The textured finish gives a rugged protective appearance and helps conceal scratches, cracks, and surface blemishes.
Adhesive-Backed Vinyl
Built with adhesive backing for cut-to-length installation on clean, dry, properly prepared surfaces.
Sold by the Foot
Order only the amount needed. Multiple feet are supplied in a continuous uncut length when possible, up to approximately 150 ft.
Included Components
| Quantity | Item |
|---|---|
| 1 linear foot per quantity ordered | 9" wide textured black adhesive stone guard vinyl |
| Not included | Installation tools, surface cleaner, trimming tools, and application accessories |
