Weight Distribution Hitch Shank
Trailer Weight Distribution 12k Capacity - 9 hole - 8.75" Drop - Black Powder Coat - 2" Shank
Heavy-duty weight distribution shank designed for 2 inch x 2 inch hitch receivers and compatible round bar or trunnion style weight distribution systems. The 9-hole adjustment pattern helps set the hitch head height for proper trailer and tow vehicle alignment.
Part Number: 3357 12,000 lb GTW / 1,200 lb TW 2 Inch Receiver Shank
Key Measurements & Specs
| Specification |
Detail |
| Part Number / SKU |
3357 |
| Brand |
Reese |
| Product Type |
Weight distribution shank |
| Receiver Size |
2 inch x 2 inch hitch receiver |
| Weight Rating |
12,000 lb gross trailer weight / 1,200 lb tongue weight |
| Drop |
8.75 inch manufacturer-listed drop |
| Adjustment Holes |
9 mounting holes on 1.25 inch centers |
| Hitch Pin Hole to Bolt Holes |
9.5 inch measurement listed by manufacturer |
| Material / Finish |
Welded steel with black powder coat finish |
| Quantity Included |
1 weight distribution shank |
Fitment / Application
| Category |
Details |
| Vehicle / Trailer / System |
Weight distribution hitch systems |
| Primary Fit |
Fits 2 inch x 2 inch trailer hitch receivers |
| Compatible Hitch Styles |
Designed for use with round bar and trunnion style weight distribution systems |
| Adjustment Use |
Can be used for rise or drop positioning depending on hitch head setup and trailer height requirements |
| Important Note |
Verify receiver size, hitch head compatibility, required ball height, tongue weight, and gross trailer weight before ordering. |
Top Features
| Feature |
Buyer Benefit |
| 12K Rated Capacity |
Supports weight distribution applications rated up to 12,000 lb gross trailer weight and 1,200 lb tongue weight. |
| 9-Hole Adjustment |
Provides vertical adjustment to help level the trailer with the tow vehicle. |
| 2 Inch Receiver Fit |
Designed for standard 2 inch x 2 inch trailer hitch receivers. |
| Welded Steel Construction |
Black powder coated steel construction helps resist corrosion and road-wear exposure. |
Overview
The Reese 3357 weight distribution shank is a heavy-duty replacement or setup component for weight distribution hitch systems using a 2 inch receiver. It allows the hitch head height to be adjusted along the vertical mounting holes, helping align the tow vehicle and trailer for a more level towing setup.
R&P Service Insight
A weight distribution shank should be selected by receiver size, system rating, hitch head compatibility, and required rise or drop. The correct shank height is important because even a properly rated weight distribution hitch will not perform correctly if the trailer is not set close to level.
-
Receiver Check: Confirm your tow vehicle uses a 2 inch x 2 inch receiver opening.
-
Capacity Check: Do not exceed the 12,000 lb GTW or 1,200 lb tongue weight rating.
-
Height Check: Measure your coupler height and receiver height before choosing a shank.
R&P Knowledge Hub
Compatibility: This shank is designed for round bar and trunnion style weight distribution systems where the hitch head mounting pattern and rating are compatible.
Vehicle / System Fit: Fits 2 inch trailer hitch receivers and is not vehicle-specific.
Installation Notes: Set the hitch head height according to your weight distribution hitch instructions. Verify that all fasteners, hitch pins, clips, and head hardware are correctly rated and properly torqued.
Performance Insight: The 9-hole adjustment pattern allows the hitch head to be positioned to help achieve proper tow vehicle-to-trailer alignment.
Brand & Fitment Note
Selling Brand: Reese
Application Reference: Designed for compatible weight distribution hitch applications using a 2 inch receiver and matching hitch head mounting pattern.
What This Means: This listing is for one Reese 3357 weight distribution shank, not a complete weight distribution hitch system.
Before Ordering: Verify receiver size, weight rating, required rise or drop, hitch head compatibility, and included components before installation.
R&P Repair Insight
Replace or change the shank when your current shank cannot provide the correct hitch head height, is underrated for the trailer, does not match the receiver size, or shows damage from impact, distortion, corrosion, or improper hardware use.
-
Check Ball Height: Measure the trailer coupler height while the trailer is level and compare it to the tow vehicle receiver height.
-
Check Head Fit: Confirm your weight distribution head will mount correctly to the shank hole spacing and shank profile.
-
Check Hardware: Reuse only properly rated hitch head bolts, pins, clips, and related hardware specified by the weight distribution hitch manufacturer.
Features
Heavy-Duty 12K Rating
Rated up to 12,000 lb gross trailer weight and 1,200 lb tongue weight for compatible weight distribution hitch systems.
9-Hole Height Adjustment
Vertical adjustment holes allow the hitch head to be positioned for better trailer-to-tow-vehicle leveling.
Fits 2 Inch Receivers
Designed for standard 2 inch x 2 inch trailer hitch receiver openings.
Black Powder Coated Steel
Welded steel construction with a black powder coat finish for strength and corrosion resistance.
Included Components
| Quantity |
Item |
| 1 |
Reese 3357 weight distribution shank |
| Not Included |
Complete weight distribution hitch system, spring bars, hitch head, hitch ball, mounting hardware, hitch pin, or clip unless specifically shown or stated with the order. |
Important Fitment Note: Verify your receiver size, weight distribution hitch head compatibility, required ball height, trailer coupler height, gross trailer weight, tongue weight, and included components before installation. Rise and drop requirements depend on the tow vehicle, trailer, hitch head, and mounting position.
Reese 3357 weight distribution shank, 3357 shank, 12K weight distribution shank, 2 inch receiver shank, 9 hole weight distribution shank, trailer hitch weight distribution shank, Reese WD shank, black powder coat steel shank, 12000 lb GTW weight distribution shank, 1200 lb tongue weight shank, round bar trunnion weight distribution shank, trailer towing shank for 2 inch receiver
