Custom 7-Way RV Camper Y Adapter Splitter, 1 Male to 2 Female, 30 Inch Leads
Custom 7-way blade Y adapter designed for slide-in camper and trailer towing setups where one truck 7-way socket needs to split into two female 7-way connections.
Overview
This R&P Carriages custom 7-way Y adapter is built for pickup truck slide-in camper users who need to plug a camper into the truck’s 7-way trailer connector while still keeping a second 7-way female socket available for towing a trailer. The adapter plugs into the truck’s existing 7-way blade socket and splits the connection into two female 7-way blade sockets.
R&P Service Insight
Slide-in camper wiring can create a common problem: the camper uses the truck’s rear 7-way trailer plug, leaving no open plug for a trailer. This splitter gives you two 7-way female outputs from one 7-way male connection.
- Camper + Trailer Use: Designed to let a slide-in camper and trailer plug into the same truck-side 7-way system.
- Blade-Style Connection: Uses standard 7-way blade-style trailer/RV connectors.
- Fit Check Required: Confirm your truck, camper, and trailer use compatible 7-way blade wiring before installation.
R&P Knowledge Hub
Compatibility: Intended for 7-way blade trailer wiring systems where a single truck-side 7-way socket needs to feed two 7-way female outputs.
Vehicle / System Fit: Commonly used with pickup trucks, slide-in campers, and trailers using 7-way blade connectors.
Installation Notes: Plug the male 7-way end into the truck’s existing 7-way blade socket, then connect the camper and trailer to the two female 7-way blade sockets. Verify wiring function before towing.
Performance Insight: The dual-lead Y design helps keep the camper plugged in while also providing a second 7-way connection for a trailer.
Brand & Fitment Note
Selling Brand: R&P Carriages
Application Reference: Truck, camper, trailer, and RV references in this listing describe application style only. Compatibility depends on matching 7-way blade connector style, wiring layout, and system requirements.
What This Means: This listing is for a custom R&P Carriages 7-way Y adapter splitter, not a guaranteed OEM-branded item.
Before Ordering: Verify connector style, wire function, voltage range, cable length, mounting clearance, and your camper/trailer wiring requirements before installation.
R&P Repair Insight
Before installing any splitter in a towing circuit, inspect the truck socket, camper plug, and trailer plug for corrosion, loose terminals, worn blades, or wiring damage. A splitter can only perform correctly when the plugs and wiring it connects to are in good condition.
- Connector Check: Confirm all three connections are 7-way blade style before ordering.
- Function Test: Test lights, brake signal, turn signals, and auxiliary circuits after installation.
- Cable Routing: Route both 30 inch leads away from pinch points, exhaust heat, sharp edges, and moving hitch components.
Features
1 Male to 2 Female Y Splitter
Plugs into one truck-side 7-way blade socket and provides two female 7-way blade sockets for camper and trailer connections.
Dual 30 Inch Cable Leads
Includes two 30 inch long 7-wire conductor cable leads for flexible routing between the camper and trailer plug locations.
14 AWG Wiring
Built with 14 AWG wires as provided in the source listing details.
7-Way Blade RV Style Connectors
Includes one 7-way blade trailer-end plug and two 7-way blade truck-end sockets for RV-style trailer wiring setups.
Specifications
| Specification | Detail |
|---|---|
| Part Number | ADAPT-Y-1M-2FM-30-INCH |
| Brand | R&P Carriages |
| Product Type | Custom 7-way Y adapter splitter |
| Application | Pickup truck slide-in camper and trailer wiring setups |
| Connector Style | 7-way blade RV/trailer style |
| Key Measurement | Two 30 inch cable leads |
| Wire Size | 14 AWG wires |
| Voltage Range | 6–24 volt maximum |
| Configuration | 1 male 7-way plug to 2 female 7-way sockets |
Fitment / Application
| Category | Details |
|---|---|
| Vehicle / System | Truck, slide-in camper, and trailer 7-way blade wiring systems |
| Primary Fit | Pickup trucks with a rear 7-way blade socket used by a slide-in camper |
| Secondary Fit | Trailer towing setups requiring a second 7-way female connection while the camper remains plugged in |
| Notes | Verify your truck, camper, and trailer all use compatible 7-way blade connectors and confirm all wiring functions before towing. |
Included Components
| Quantity | Item |
|---|---|
| 2 | 30 inch long 7-wire conductor cable leads |
| 1 | 7-way blade male trailer-end plug |
| 2 | 7-way blade female truck-end sockets |
| Included | 14 AWG wiring as part of the adapter assembly |
