POWERED BY R&P CARRIAGES

LaVanture

Gas Spring SPD-GSNI-5000-10 or LGP6-100-10 Strut Prop Rod RV Camper Hatch Door (LGP6-100-10)

$26.62
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: LGP6-100-10
PRODUCT INFORMATION

Product Details

Gas Spring Strut Rod / RV Hatch Support / Black Nitride Shaft

Gas Spring SPD-GSNI-5000-10 or LGP6-100-10 Strut Prop Rod RV Camper Hatch Door

Replacement gas spring strut rod for compatible hatch, cover, RV, camper, compartment door, and lift-support applications requiring a 10" extended length, 3" stroke, 10 lb force, and standard 10mm ends.

Part Number: GSNI-5000-10 / LGP6-100-10 10" Extended / 3" Stroke 10 lb Force / 10mm Ends

Key Measurements & Specs

Specification Detail
Part Number / SKU GSNI-5000-10 / LGP6-100-10
Brand R&P Carriages replacement listing; SPD and LGP numbers used as application references
Product Type Gas spring strut rod / lift support
Extended Length 10"
Stroke 3"
Force Rating 10 lb
End Style Standard 10mm ends
Material / Finish Black nitride shaft; steel gas spring body
Quantity Included 1 gas spring strut rod

Fitment / Application

Category Details
Vehicle / Trailer / System Hatches, covers, RVs, campers, compartment doors, lift-up panels, and compatible support applications
Primary Fit Fits applications requiring a 10" extended gas spring with 3" stroke, 10 lb force, and standard 10mm ends
Replacement Reference SPD GSNI-5000-10 and LGP6-100-10 application reference
Fitment Method Match the extended length, stroke, force rating, end size, and mounting ball/stud style before ordering
Important Note Do not select by appearance alone. Gas springs must match length, stroke, end connection, and force rating for safe function.

Top Features

Feature Buyer Benefit
10" Extended Length Matches common short hatch, cover, and compartment-door gas spring applications
3" Stroke Provides the travel needed for compatible short-lift support installations
10 lb Force Rating Designed for lighter panels where a low-force support is required
Black Nitride Shaft Provides a clean black appearance with added corrosion resistance at the shaft
Standard 10mm Ends Works with compatible 10mm ball-stud mounting points

Overview

This listing is for one black nitride shaft gas spring strut rod used as a replacement lift support for compatible hatches, covers, RVs, campers, and compartment applications. It is commonly referenced by SPD GSNI-5000-10 and LGP6-100-10 and should be selected by matching the original gas spring’s extended length, stroke, force rating, and 10mm end connection.

R&P Service Insight

Gas springs are measurement-sensitive parts. A gas spring that is close in appearance can still be incorrect if the force rating, stroke, or end connection does not match the original installation.

  • Measure Extended Length: Measure the original gas spring fully extended from center of end fitting to center of end fitting.
  • Match Force: Replace a 10 lb gas spring with the same force rating unless the application has been re-engineered.
  • Check Ends: Confirm the mounting points use compatible standard 10mm ball ends before ordering.

R&P Knowledge Hub

Compatibility: Designed for applications that match SPD GSNI-5000-10 or LGP6-100-10 dimensions and force requirements.

Vehicle / System Fit: Used on compatible RV, camper, hatch, cover, compartment door, and lift-support systems.

Installation Notes: Support the hatch, cover, or door before removing the old strut. Gas springs can no longer safely support a panel once disconnected or worn out.

Performance Insight: The 10 lb force rating is intended for lighter lift-support applications. Too much force can make the panel difficult to close; too little force may not hold it open.

Brand & Fitment Note

Selling Brand: R&P Carriages replacement gas spring listing.

Application Reference: SPD GSNI-5000-10 and LGP6-100-10 are used as replacement and compatibility reference numbers.

What This Means: This listing is for one compatible gas spring strut rod, not a guaranteed OEM-branded item unless specifically stated on the product packaging.

Before Ordering: Verify extended length, stroke, force rating, end style, mounting ball size, and quantity needed before installation.

R&P Repair Insight

Weak or failed gas springs are commonly replaced when a hatch, cover, camper door, or compartment panel will not stay open. Always compare the markings on the old gas spring and measure the part before ordering.

  • Length Check: Confirm the original unit is 10" extended length.
  • Stroke Check: Confirm the original stroke is 3".
  • Force Check: Confirm the original force rating is 10 lb or 45N equivalent before replacing.

Features

Black Nitride Shaft

Provides a black appearance and added corrosion resistance at the shaft for compatible exposed applications.

10" Extended Length

Matches short gas spring applications where the existing strut measures 10" fully extended.

3" Stroke

Provides the travel required for compatible hatch, cover, door, and compartment lift-support applications.

Standard 10mm Ends

Designed for applications using compatible 10mm ball-stud mounting points.

Included Components

Quantity Item
1 Black nitride shaft gas spring strut rod
Not Included Mounting brackets, ball studs, screws, and additional hardware unless specifically shown or selected separately
Important Fitment Note: Verify the original gas spring part number, 10" extended length, 3" stroke, 10 lb force rating, standard 10mm ends, mounting ball size, and quantity required before installation. SPD and LGP numbers are used as compatibility references only.
Black nitride shaft gas spring strut rod SPD GSNI-5000-10 LGP6-100-10 10 inch extended 3 inch stroke 10 lb force 10mm ends RV camper hatch door cover compartment lift support replacement gas spring prop rod

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.

R&P Knowledge Hub

Gas Spring Reference

Review this gas spring or compare another SPD / GSNI spring by extended length, family and force rating.

Current Gas Spring
Force
Extended
Compressed
Stroke
Rod / Tube
Compare another gas spring
How to measure a gas spring
EXTENDED LENGTH — CENTER TO CENTER TUBE ROD STROKE

Extended: measure center-to-center with the spring fully extended.

Compressed: measure center-to-center with the spring fully compressed.

Stroke: the distance the rod travels between compressed and extended positions.

Force: match the printed force rating whenever possible.

Reference Match

Force
Extended
Compressed
Stroke
Rod / Tube
Standard End

Reference only: verify the printed product number, force, extended length, compressed length, stroke, rod diameter, tube diameter and end fitting before ordering.