Dexter D44 Hub Drum Kit 6x5.5 10x2.25 Straight Spindle Post-2022
This listing is for one curated D44 hub and drum service kit built around the Dexter 008-498-05 new-style 4,400 lb hub drum. Designed for compatible post-2022 Dexter D44 wheel-end applications where the spindle, bearing set, brake size, and bolt pattern match.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Kit SKU | 008-498-05-KIT |
| Main Hub Drum | 008-498-05 |
| Brand / System | Dexter D44 New Style |
| Hub Drum Capacity | 4,400 lb application reference |
| Bolt Pattern | 6 on 5.5" |
| Brake Size | 10" x 2.25" |
| Stud Size | 1/2"-20 |
| Bearing / Cup Reference | L68149 bearing / L68111 cup reference |
| Quantity Included | One hub drum service kit |
Fitment / Application
| Category | Details |
|---|---|
| Trailer System | Dexter D44 4,400 lb trailer axle wheel-end applications |
| Primary Fit | Post-2022 new-style D44 straight spindle applications |
| Brake Fit | For compatible 10" x 2.25" trailer brake assemblies |
| Wheel Fit | 6 on 5.5" trailer wheels using 1/2"-20 lug nuts |
| Fitment Method | Verify axle model, spindle style, bearing numbers, brake size, and bolt pattern before ordering |
| Important Note | This kit is for new-style D44 applications. Do not use for old-style D44 or 3,500 lb hub applications unless all measurements and bearing references match. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| Post-2022 D44 Design | Matches Dexter’s redesigned D44 wheel-end system when your axle uses the new-style setup |
| 6 on 5.5" Pattern | Fits compatible 6-lug trailer wheel applications |
| Service Kit Format | Includes the hub drum plus the BOM-listed seal, dust cap, bearings, and lug nuts |
| EZ Lube Dust Cap | Includes a 2.44" EZ Lube style grease dust cap for compatible hubs |
Overview
The 008-498-05-KIT is a trailer hub and drum service kit for compatible Dexter D44 new-style 4,400 lb axle applications. The kit is built around the 008-498-05 hub drum with a 6 on 5.5" bolt pattern, 10" x 2.25" brake fit, L68149 bearing / L68111 cup reference, grease seal, EZ Lube dust cap, and 1/2"-20 coned lug nuts. This kit is intended for post-2022 D44 straight spindle applications where the axle and wheel-end measurements match.
R&P Service Insight
D44 hub and drum fitment can be confusing because Dexter changed the D44 wheel-end system after 2022. Before ordering, compare your existing hub, bearing numbers, brake size, spindle style, and wheel bolt pattern.
- Check the spindle: This listing is for the new-style post-2022 D44 straight spindle configuration.
- Check the bearings: This kit uses the L68149 bearing / L68111 cup reference shown for the new-style D44 wheel end.
- Check the brake size: This hub drum is for compatible 10" x 2.25" brake assemblies.
R&P Knowledge Hub
Compatibility: Compatible with Dexter D44 new-style applications only where the spindle, bearing set, brake size, wheel bolt pattern, and hub measurements match.
Vehicle / System Fit: Intended for Dexter D44 4,400 lb trailer axle wheel-end service using the post-2022 hub and drum design.
Installation Notes: Always inspect the spindle, brake assembly, bearing surfaces, seal surface, and existing hub before installation. Replace worn or damaged wheel-end components as needed.
Performance Insight: Dexter’s D44 redesign moved to a revised wheel-end setup with larger same-size bearings for the new-style system, so pre-2022 and post-2022 parts should not be mixed without verifying compatibility.
Brand & Fitment Note
Selling Brand: R&P Carriages service kit using a Dexter 008-498-05 new-style D44 hub drum as the main component.
Application Reference: Dexter and D44 are used as application references for compatible trailer axle wheel-end fitment.
What This Means: This listing is for a curated R&P service kit, not a boxed Dexter kit unless specifically stated. The main hub drum component is identified as Dexter 008-498-05.
Before Ordering: Verify axle model, year/style, spindle design, bearing numbers, seal size, dust cap size, brake size, bolt pattern, and included components before installation.
R&P Repair Insight
This type of kit is commonly used when servicing a damaged, worn, or replaced D44 hub drum. The most important part of the repair is confirming whether the trailer uses the old-style or new-style D44 wheel-end system.
- Old vs. new style: This is a post-2022 new-style D44 kit. Do not assume it replaces pre-2022 D44 parts.
- Seal check: The included 171255TB seal is 1.719" ID x 2.565" OD. Confirm your spindle seal surface and hub bore match.
- Included hardware: This kit includes the BOM-listed parts only. Spindle nut, washer, cotter pin, brake assembly, and additional hardware are not included unless listed.
Features
New-Style D44 Hub Drum
Built around the 008-498-05 D44 hub drum for compatible post-2022 Dexter 4,400 lb axle wheel-end applications.
6 on 5.5" Wheel Pattern
Designed for compatible 6-lug trailer wheels using a 6 on 5.5" bolt circle and 1/2"-20 lug nuts.
10" x 2.25" Brake Fit
Matches compatible 10" x 2.25" trailer brake assemblies when the axle and hub specifications line up.
BOM-Listed Service Components
Includes the hub drum, grease seal, EZ Lube dust cap, L68149 bearings, and 1/2"-20 coned lug nuts shown in the kit BOM.
Included Components
| Quantity | Item |
|---|---|
| 1 | 008-498-05 D44 hub drum assembly, 4,400 lb application, 6 on 5.5", Dexter, 10" x 2.25", post-2022 new style |
| 1 | 171255TB double lip grease seal, 1.719" ID x 2.565" OD |
| 1 | DC-250L grease dust cap, 2.44", EZ Lube style |
| 2 | L68149 bearing, 1.378" ID, fits L68111 / L68110 reference applications |
| 6 | X1023R 1/2"-20 closed-end 60 degree coned lug nuts |
