PAIR -7" Genuine Dexter 5 x 4.5 Drum 2000# Backing Plate Trailer Add Brake axle (7IN5BD-B-DEX)

R & P Carriages

Regular price $375.99

Genuine Dexter 2000# Basic Add Brakes to Your Trailer Kit 
with a 
5 x 4.5 Bolt Pattern
GENUINE DEXTER USA MADE
 
Part#: 98545-B-DEX 



Common 5 on 4-1/2" bolt pattern
(4-1/4" stud Spacing)

Complete 2000-2200# Trailer Brake Setup, with drums, seals, Brake shoes, Bearings, new hardware, backing plates, EVERYTHING for one axle! 

For 2000-2200# axles from Dexter, AL-KO, AXIS, Quality, and others! 

(Often used on small utility trailers often with smaller  10" or 12" tires)

In order for these brakes to work, you must have a brake controller and a 7 way plug installed in your truck


If you have a trailer without brakes, and you want to add them, this kit has EVERYTHING you will need. This kit fits standard 2000# & 2200# axle, either Spring or Torsion, EZ lube or Standard. 

This Kit Includes: 
TWO - Electric Brake backing plates, 2000# per pair, 7" Diameter, one left, one right DEXTER PART NUMBERS 023-047-00,  023-048-00
TWO - New 7" Dexter brake drums, 5 x 4.5" bolt pattern Dexter 008-257-04 , with races already pressed in 
(I have these with 4 studs, this auction is for one 5 studs for lug nuts, if you need hubs with 4 studs, let me know, and I will list one.)
All
 hardware to attach backing plates to axle mount plate (special 7/16 nuts).
All brake hardware, springs, levers, magnets, shoes, etc.
New inner grease seals
All New Wheel Bearings (Shipping loose with kit):
TWO - 1.25" 12192TB seals
TWO - 1.50" 10-60 Seals
FOUR - L44649 bearings
FOUR - L44643 bearings

TEN - Matching lug nuts, 1/2-20
TWO - New EZ Lube Dust Caps

In addition, you should see a small square plate welded to the axle tube, with 4 holes, (to bolt the brake plate to) and your axle tube will be about 2 1/4" OD. If you have a 2.75" axle tube, it is the larger 5200, 6000, or 7000# axle, and if you have the smaller 1-5/8" axle tube, it has the smaller 2000/2200# axle

This auction is for a trailer with a 5 bolt, 4.5" bolt pattern!  I stock all sizes, so please check my other auctions or specify you want a different size!


It has come to my attention that some axles do not have the small 4 bolt flange welded to it, that is needed to mount the brake backing plate. Below is a picture  If you do not have this, I can furnish the plates, but they must be WELDED on:




Note: We offer two different types of brake kits. Basic Kits & Complete Kits
Complete Kits are for adding brakes for the first time
Basic Kits are for adding brakes to a second axle or replacing them.  

Make sure you double check that you are ordering the right bolt pattern before you pay