Match the part number, measurements and connection points that apply to your trailer.
| Hub Face | Measure hub face to hub face. |
|---|---|
| Spring Center | Measure mounting centers and confirm perch configuration. |
| Capacity | Match the required axle rating. |
| Brakes | Confirm brake type and flange configuration. |
Part Number: HW-132-01
This listing is for one (1) drive-in (press-in) wheel stud designed for trailer wheel hubs. This stud is commonly used as a replacement for damaged or spinning studs on hubs that use 9/16"-18 lug nuts.
This is a press-fit stud — it installs from the rear of the hub flange and relies on the spline diameter to lock into the hub. It is not a screw-in stud.
| Ref | Description | Measurement |
|---|---|---|
| A | Thread Size | 9/16"-18 |
| B | Overall Stud Length | 2-5/16" |
| C | Spline Length | 0.31" |
| D | Base (Under-Head) Length | 0.81" |
| E | Spline Diameter | 0.689" |
This is NOT a vehicle-specific part. Fitment depends entirely on hub bore and spline diameter.
?? WILL NOT FIT hubs requiring different spline diameters or screw-in studs.
