One 7.75" Long Equalizer - 9/16" Hole - 1-3/4" Wide Double-Eye Leaf Springs
One curved trailer suspension equalizer for compatible tandem- or triple-axle trailers using 1-3/4" wide double-eye leaf springs with 9/16" spring eyes. Designed to connect spring assemblies and allow movement between axles for smoother load transfer.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | EQ-E1 |
| Product Type | Curved trailer suspension equalizer |
| Overall Length | 7-3/4" |
| Spring Width Compatibility | For 1-3/4" wide double-eye leaf springs |
| Center Bolt Hole Diameter | 9/16" |
| Left / Right Bolt Hole Diameter | 9/16" |
| Material / Finish | Steel |
| Quantity Included | 1 equalizer |
Fitment / Application
| Category | Details |
|---|---|
| Trailer System | Leaf spring suspension for tandem- or triple-axle trailers |
| Primary Fit | Compatible setups using 1-3/4" wide double-eye springs with 9/16" spring eyes |
| Fitment Method | Match equalizer length, bolt hole diameter, spring width, hanger spacing, and shackle hardware before ordering |
| Important Note | Verify before ordering. Equalizers must match the trailer suspension geometry already on the trailer. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| 7-3/4" Length | Matches compatible suspension layouts requiring this equalizer size |
| 9/16" Bolt Holes | Works with compatible 9/16" suspension bolts and spring eye hardware |
| Curved Equalizer Design | Allows controlled movement between axles in multi-axle trailer suspension systems |
| Double-Eye Spring Application | Built for compatible 1-3/4" wide double-eye leaf spring setups |
Overview
The EQ-E1 is a 7-3/4" long curved trailer suspension equalizer used with compatible 1-3/4" wide double-eye leaf springs. It connects the spring assemblies on tandem- or triple-axle trailers and helps allow the suspension to articulate as the trailer travels over uneven surfaces.
R&P Service Insight
Equalizer fitment is measurement-driven. Before replacing one, compare the old equalizer against this part and confirm bolt size, hole spacing, spring width, and the surrounding shackle hardware.
- Measure first: Confirm the 7-3/4" length against the existing equalizer or suspension diagram.
- Check bolt diameter: This listing specifies 9/16" center and side bolt holes.
- Inspect related parts: Worn shackles, bolts, bushings, or hangers can affect alignment and suspension movement.
R&P Knowledge Hub
Compatibility: Intended for compatible tandem- or triple-axle trailer suspension systems using 1-3/4" wide double-eye leaf springs with 9/16" spring eyes.
Vehicle / System Fit: Trailer leaf spring suspension equalizer application. Verify suspension geometry before ordering.
Installation Notes: Replace suspension components with the trailer safely supported. Confirm bolt size, shackle length, hanger condition, and spring eye condition during service.
Performance Insight: The equalizer helps distribute suspension movement between axles, which can improve ride control and reduce harsh transfer through the trailer frame when the suspension geometry is correct.
Brand & Fitment Note
Selling Brand: R&P Carriages
Application Reference: Trailer suspension fitment is based on measurements and spring configuration, not by trailer brand alone.
What This Means: This listing is for one EQ-E1 curved trailer suspension equalizer for compatible double-eye leaf spring applications.
Before Ordering: Verify equalizer length, 9/16" bolt hole size, 1-3/4" spring width, hanger spacing, shackle setup, and all related suspension hardware before installation.
R&P Repair Insight
Equalizers are commonly replaced during suspension rebuilds when the original part is worn, elongated at the bolt holes, bent, damaged, or no longer matches the trailer’s suspension geometry. Always inspect the connected hardware at the same time.
- Bolt hole check: Elongated or wallowed holes can cause excess suspension play.
- Spring check: Confirm the springs are 1-3/4" wide double-eye springs with 9/16" spring eyes.
- System check: Match both sides of the suspension so the trailer tracks and rides evenly.
Features
7-3/4" Long Equalizer
Replacement equalizer for compatible suspension layouts requiring a 7-3/4" long curved equalizer.
9/16" Center Hole
Center bolt hole is specified at 9/16" for compatible center hanger mounting hardware.
9/16" Side Holes
Left and right bolt holes are specified at 9/16" for compatible shackle and spring eye hardware.
Double-Eye Spring Fitment
Designed for compatible 1-3/4" wide double-eye leaf spring suspension systems on multi-axle trailers.
Included Components
| Quantity | Item |
|---|---|
| 1 | 7-3/4" curved trailer suspension equalizer, part number EQ-E1 |
| Not Included | Mounting bolts, shackle straps, nuts, bushings, springs, hangers, and other suspension hardware unless purchased separately |
