At a Glance
- SKU: 3500-925-3-D-KIT
PRODUCT INFORMATION
Product Details
3500 LB TRAILER AXLE BEAM / DROP AXLE / EZ LUBE
Lippert 3500 lb Trailer Axle Beam – 92.5" Hub Face – 3" HD Tube – 4" Drop – EZ Lube W Loose Perches
A 3500 lb Lippert trailer axle beam with 92.5" hub face, heavy duty 3" tube, 4" drop, EZ Lube spindles, and loose 3" spring perches included for final spring center setup.
Part Number: 3500-925-3-D-KIT 3500 lb Axle Beam 92.5" Hub Face / 4" Drop
Overview
This Lippert 3500 lb trailer axle beam is built for trailer and camper axle replacement work where a 92.5" hub face, 4" drop, cambered beam profile, EZ Lube spindle setup, and heavy duty 3" axle tube are required. It is commonly used with compatible 5-lug hub and 10" drum brake configurations when the axle measurements match the trailer.
R&P Service Insight
Axle replacement is measurement-driven. Hub face, spring center, tube size, drop, camber direction, brake flange position, and hub/brake compatibility all need to line up before installation.
- Hub Face: The 92.5" hub face measurement controls the trailer’s wheel track width.
- Tube Size: This listing uses a heavy duty 3" axle tube and includes SP-3 spring perches for 3" axle beams.
- Perch Setup: Spring perches are included loose and must be welded at the correct spring center before road use.
R&P Knowledge Hub
Compatibility: Verify 92.5" hub face, 4" drop, 3" axle tube, EZ Lube spindle style, brake flange spacing, bearing set, seal size, and spring center before ordering.
Trailer Fit: Common replacement axle style for utility trailers and campers using compatible 3500 lb running gear, 5-lug hubs, or 10" drum brakes where dimensions match.
Installation Notes: Hub face and spring center are not the same measurement. Spring center must be measured center-to-center at the leaf springs or existing spring perches.
Performance Insight: The cambered beam profile is designed to carry load correctly when installed with the axle arch facing upward in the center.
Brand & Fitment Note
Selling Brand: Lippert axle beam sold by R&P Carriages.
Application Reference: Trailer, camper, hub, and brake references in this listing describe compatibility targets only where the buyer’s measurements and configuration match.
What This Means: This listing is for one 3500 lb bare axle beam kit with loose spring perches included. Hubs, drums, bearings, seals, brakes, U-bolts, plates, and hardware are not included unless specifically shown in the included components table.
Before Ordering: Verify axle capacity, hub face, spring center, tube diameter, drop, brake flange configuration, bearing numbers, seal number, and hub/brake setup before installation.
R&P Repair Insight
A trailer axle can look close and still be wrong. The most common mistakes are matching only the weight rating or only the hub face while missing the drop, tube size, brake flange location, spring center, or hub/bearing configuration.
- Measure Before Matching: Confirm the old axle’s hub face, brake flange spacing, bearing shoulder, spindle end, and spring center before installing the replacement.
- Check Drop Direction: Confirm this 4" drop axle matches the original axle style and trailer ride height requirement.
- Confirm Running Gear: This beam uses L44649 and L68149 bearings with 10-19 grease seals when paired with compatible hub assemblies.
Features
3500 lb Lippert Axle Beam
Built for 3500 lb trailer axle replacement applications where the axle dimensions and running gear configuration match.
92.5" Hub Face
Hub face measurement helps determine the trailer’s overall wheel track and must be verified before replacement.
Heavy Duty 3" Tube
Uses a heavy duty 3" axle tube and includes matching SP-3 spring perches for 3" axle beam installation.
4" Drop / EZ Lube Setup
Designed with a 4" drop, cambered beam profile, and EZ Lube spindle configuration for compatible trailer setups.
Specifications
| Specification | Detail |
|---|---|
| Part Number | 3500-925-3-D-KIT |
| Brand | Lippert |
| Product Type | Bare trailer axle beam kit with loose spring perches |
| Axle Capacity | 3500 lb |
| Hub Face | 92.5" |
| Tube Diameter | 3" heavy duty tube |
| Drop | 4" drop |
| Spindle Style | EZ Lube |
| Brake Flange to Flange | 86.06" |
| Bearing Shoulder to Shoulder | 88.69" |
| Spindle End to End | 96.88" |
| Common Bearing Reference | L44649 and L68149 bearings for compatible hub assemblies |
| Common Seal Reference | 10-19 grease seal for compatible hub assemblies |
Fitment / Application
| Category | Details |
|---|---|
| Trailer Type | Utility trailers, campers, and compatible 3500 lb trailer axle applications |
| Primary Fit | Trailers requiring a 92.5" hub face, 3" tube, 4" drop, EZ Lube 3500 lb axle beam |
| Common Deck Width Reference | Commonly used on trailers or campers with approximately 74.50" to 80.50" floor deck width when dimensions match |
| Hub / Brake Reference | Often paired with compatible 5-lug hubs or 10" drum brakes; verify bearings, seals, brake flange, and hub configuration before ordering |
| Important Note | Spring perches are included loose and must be welded at the correct spring center before the axle is placed into service. |
Included Components
| Part Number | Quantity | Item |
|---|---|---|
| 3500-925-3-D-KIT | 1 | Lippert Trailer Axle 3500 lb Bare Beam, 92.5" Hub Face, 3" Heavy Duty Tube, 4" Drop, EZ Lube |
| SP-3 | 2 | Spring Perch for 3" Axle Beam — ships loose unless welding is specifically requested, spring center is provided, and R&P confirms before shipment |
Important -KIT Axle Notice
What Comes in the -KIT: Spring Perches Are Included Loose
This -KIT includes the axle beam and loose spring perches / spring seats. The spring perches are included as separate pieces. Included does not mean welded.
Spring perches ship loose by default. They are not welded to the axle tube before shipment unless the customer specifically requests perch welding in the order notes, provides the correct Spring Center measurement, and R&P confirms the weld-on request before the axle ships.
Repetition matters: If the listing says “spring perches included,” that means loose spring perches are included with the kit. It does not mean the spring perches are already installed, welded, or ready for towing.
Do not install or tow with loose spring perches. The perches must be measured, positioned, squared, and welded to the axle tube before the axle is placed into service.
When Will R&P Weld the Spring Perches?
R&P may weld the spring perches before shipment only when the order clearly gives us the information needed to do it correctly.
- The customer must request welded spring perches in the order notes.
- The customer must provide the Spring Center measurement.
- R&P must confirm the weld-on request before shipment.
Default rule: If the order does not clearly request welded perches and does not provide a Spring Center measurement, the spring perches ship loose.
How to Find Your Spring Center Measurement
Spring Center is the distance from the center of one leaf spring to the center of the opposite leaf spring. This is the measurement used to locate where the spring perches need to be welded on the axle tube.
- Best method with old axle: Measure from the center of one existing spring perch / spring seat to the center of the opposite spring perch / spring seat.
- Best method from the trailer: Measure from the centerline of the left leaf spring pack to the centerline of the right leaf spring pack where the axle sits.
- Leaf spring center bolt method: Measure from the center of the center bolt / locating pin on one spring pack to the center of the center bolt / locating pin on the other spring pack.
- Do not measure outside-to-outside. Spring Center is a center-to-center measurement.
- Do not guess from deck width. Deck width can be helpful context, but it is not a substitute for the actual Spring Center measurement.
Axle Measurement Diagram
Use the axle measurement diagram below as a visual reference while confirming axle dimensions and installation details. Spring Center must still be measured center-to-center at the trailer’s leaf springs or existing spring perches.
Why Welding the Perches Matters
This image shows a real-world installation problem where loose spring perches were not welded before use and brake wiring was torn out. This is exactly why the axle must not be installed, towed, or placed into service while the spring perches are still loose.
Loose perches can allow the axle to move or rotate out of its intended installed position. That can damage brake wiring, brake components, suspension parts, tires, and the trailer. The perches must be properly welded before road use.
| Question | Answer |
|---|---|
| Are spring perches included in the -KIT? | Yes. Two SP-3 spring perches for a 3" axle beam are included as loose parts. |
| Are the spring perches welded on by default? | No. They ship loose by default. |
| Can R&P weld the perches before shipping? | Only if the customer requests it in the order notes, provides the correct Spring Center measurement, and R&P confirms the request before shipment. |
| What measurement is needed for welding? | Spring Center: center of one leaf spring / spring perch to the center of the opposite leaf spring / spring perch. |
| Can the axle be used with loose perches? | No. Do not install, tow, or place the axle in service until the perches are properly welded. |
| What can happen if perches are not welded? | Loose perches can allow the axle to move or rotate, which can damage brake wiring, brake parts, suspension components, tires, and the trailer. |
| Which way does camber face? | If the axle is cambered, the arch goes up in the middle when installed. |
Order Note Wording Customers Can Use
Customers who want R&P to weld the spring perches should put clear instructions in the order notes before checkout.
Example order note: “Please weld spring perches before shipping. My Spring Center measurement is ____ inches, measured center-to-center.”
Final reminder: Unless the order notes request welded perches, the Spring Center measurement is supplied, and R&P confirms the weld request, this -KIT ships with loose spring perches.
Thank You For Choosing R&P Carriages For Your Online Shopping Source!
Verify all measurements, axle capacity, hub face, spring center, tube diameter, drop, spindle type, brake flange dimensions, bearing and seal compatibility, and included components before installation. Spring perches are included loose and must be welded before use unless R&P confirms a weld-on request before shipment.
3500-92.5-3-D-KIT trailer axle Lippert 3500 lb axle beam 92.5 hub face 92.5 inch hub face trailer axle beam 3 inch tube heavy duty trailer axle 4 inch drop trailer axle beam 3500 lb trailer axle replacement utility trailer axle beam EZ Lube cambered trailer axle 3500 lb Lippert 3500 lb bare axle beam 3500 lb axle with loose spring perches SP-3 spring perch 3 inch axle beam
BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH
Ariah Granados
DIGITAL PRESENTATION & DEVELOPMENT
Ken Martin
ONLINE SALES & QUALITY ASSURANCE
Rayn Fisher
WE’RE HERE TO HELP
Not sure it fits?
Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.
815-357-3292 · 270 E Jackson St · Seneca, IL 61360
CUSTOMER REVIEWS
Leave a Google review
Good people. Real trailer work.
Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.
TRAILER PARTSGOOGLE
Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.
RV KEYSGOOGLE
Found the correct RV keys at a good price with free shipping; the keys worked as expected.
AXLE & LEAF SPRINGSGOOGLE
Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.
PARTS & SHIPPINGGOOGLE
Praised the OEM and aftermarket selection, discounts, quick shipping, and friendly parts staff.
CUSTOM AXLEGOOGLE
Got the axle he needed right away, set up with a custom spring perch.
WELDINGGOOGLE
Praised the polite staff and quality welding on a project.
GAS STRUTGOOGLE
Replacement struts brought a long-used door back to working order.
CUSTOM TRAILERGOOGLE
Had a trailer built to his needs at a fair price, then found parts for two other trailers in stock.
CUSTOMER SERVICEGOOGLE
Praised the customer service after working with R&P over several years.
GAS SHOCKGOOGLE
Found the gas shock he wanted at a good price with shipping included.
CARGO TIE-DOWNGOOGLE
Received swivel D-rings with backing plates and praised the price, correct order, and service.
PARTS DELIVERYGOOGLE
The right parts arrived the first time, with fast delivery and helpful staff.
PROJECT HELPYELLOW PAGES
Said project advice and prompt shipping helped finish a trailer project.
SHIPPINGYELLOW PAGES
Reported helpful service and fast shipment to Germany.
SUSPENSION KITYELLOW PAGES
Praised a suspension kit, fair pricing, and good parts.
TRAILER CORDYELLOW PAGES
Was pleased with a replacement trailer cord.
SERVICE & PARTSYELLOW PAGES
Noted dependable service and products across repeat visits.
AXLE INSTALLATIONYELLOW PAGES
Said the axle installation fit perfectly and thanked Josh and the crew.
HITCH REPLACEMENTYELLOW PAGES
Praised the crew’s professionalism during a difficult hitch replacement.
PRICE & SERVICEYELLOW PAGES
Liked the product, price, communication, and shipping.
LISTING INFORMATIONYELLOW PAGES
Said the product description explained what would work for the trailer.
PRODUCT & SHIPPINGYELLOW PAGES
Received the item as described with very fast shipping and plans to return.
COMMUNICATION & SHIPPINGYELLOW PAGES
Praised accurate description, quick shipping, and clear communication.
PRICE & PRODUCTYELLOW PAGES
Was happy with the product and its price.
SELLER EXPERIENCEYELLOW PAGES
Called it a pleasure doing business with R&P.
INSTALLATIONYELLOW PAGES
Was pleased with product quality, quick delivery, and an easy installation.
PRODUCTSYELLOW PAGES
Was enthusiastic about the products.
DURABILITYYELLOW PAGES
Was ready to install the product on every trailer they own.
REPEAT CUSTOMERYELLOW PAGES
Expected to buy again after a good experience.
INSTALLED PARTYELLOW PAGES
Reported that the newly installed parts were working perfectly.
REPEAT CUSTOMERYELLOW PAGES
Said things went well, as they had on previous visits.
COMMUNICATION & VALUEYELLOW PAGES
Praised clear communication and fair value.
TRANSACTIONYELLOW PAGES
Said the transaction went as expected.
PRICE & PACKAGINGYELLOW PAGES
Noted good value, careful packing, and fast shipping.
PROFESSIONAL SERVICEYELLOW PAGES
Found the team professional and easy to work with.
COMMUNICATION & SHIPPINGYELLOW PAGES
Praised fast shipping and good communication.
TEAMYELLOW PAGES
Shared appreciation for the owners and their company.
SHIPPINGYELLOW PAGES
Reported prompt shipping and said they would buy again.
CUSTOMER SERVICEYELLOW PAGES
Found R&P easy to deal with.
SERVICEYELLOW PAGES
Praised the people and the service.
FIT & SHIPPINGYELLOW PAGES
Reported a good fit, fair price, accurate listing, and quick shipping.
DELIVERYYELLOW PAGES
Received the order a day early and recommended the seller.
CUSTOM TRAILERYELLOW PAGES
Described a no-hassle, professional custom-trailer purchase.
TRAILER PURCHASEYELLOW PAGES
Praised a new trailer, custom additions, helpful staff, and clear pricing.
HUB COVERSYELLOW PAGES
Found the right hub covers quickly and got helpful maintenance advice.
AXLE HELPYELLOW PAGES
Said R&P helped their company get back on the road after an axle problem.
DUMP TRAILERYELLOW PAGES
Was happy with a dump-trailer purchase after comparing options.
BRAKES, DRUMS & SEALSYELLOW PAGES
Received clear help choosing brake assemblies and bearing seals, followed by fast shipping.
DUMP TRAILERYELLOW PAGES
Found a good deal on a 16-foot dump trailer and planned to return.
FRIENDLY SERVICEYELLOW PAGES
Thanked the staff for their patience and recommended the shop.
Showing 3 of 50
Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.