Dexter Electric Over Hydraulic Brake Actuator - 1,600 psi
Part Number: K71-651-00
Features:
1,600 psi Suitable for disc brake applicationsLarge reservoir capacity
Solid state electronics
Requires a 4-wire hookup
Wiring connections:
Yellow: cold side of breakaway switch; the wire that goes hot when a break occursBlack: positive connection on breakaway switch; the wire that charges the breakaway battery
Blue: output from in-cab controller; the wire that provides power from your brake controller
White: ground
Requires:
Meets or exceeds all Department of Transportation (DOT) regulations and federal braking requirements
a minimum 9 amp/hour breakaway kit
Compatible with most electronic brake controllers that have electric over hydraulic brake function
Time base brake controllers are not recommended
Specs:
Dimensions: 11" long x 6" wide x 7" tallDistance between mounting holes (center to center):
Horizontally: 2-1/2"
Vertically: 9-13/16"
Mounting hole diameter: 1/4"
3/8" Threaded female hydraulic fitting
The yellow wire must be attached to the breakaway unit for it to function when a breakaway occurs.
***The unit turns off at night. in order to re-awaken the unit in the morning, the customer must apply the trailer brakes using the brake controller in the truck, perhaps twice (once should work, but twice for sure)
OR
OR
Disconnect power from the unit, and reconnect to power.
You might also like
Unbranded
Regular price
$235.99
— Sold Out
Need a Trailer Part
Sale price
$46.99
Regular price
$59.99
Sale
Dexter
Regular price
$1,120.00