NEW Dexter #11 Torflex 5,200 lb Torsion Axle - 93.5" HF - 73" OB - 22.5° Up - Electric Brakes - 6 on 5.5 (5200-935-73OBI-22U)
Product Info
DEXTER #11 TORFLEX | Part #5200-935-73OBI-22U
NEW Dexter 5,200 lb Torsion Trailer Axle – 93.5" Hub Face – Electric Brakes
73" Outside Bracket · 22.5° Up · 6 on 5.5" · EZ-Lube
This genuine Dexter #11 Torflex torsion trailer axle provides a 5,200 lb rated axle capacity in a compact, independent rubber torsion suspension design. Unlike traditional leaf-spring axle assemblies, a Torflex axle incorporates its suspension system within the axle structure, eliminating the need for conventional leaf springs, shackles and equalizers.
This axle is configured with a 93.5-inch hub-face measurement, 73-inch outside-bracket measurement and 22.5-degree up starting angle. It features electric brakes, a 6 on 5.5-inch wheel bolt pattern and Dexter EZ-Lube lubrication provisions.
Ideal for replacing a matching torsion axle or for a properly engineered trailer project where the axle rating, dimensions, mounting arrangement and suspension geometry meet the application requirements.
Specifications
| Manufacturer | Dexter |
|---|---|
| Part number / SKU | 5200-935-73OBI-22U |
| Axle series | #11 Torflex |
| Axle type | Rubber torsion suspension axle |
| Rated axle capacity | 5,200 lb |
| Hub face (HF) | 93.5 in. |
| Outside bracket (OB) | 73 in. |
| Start angle | 22.5° up |
| Brake configuration | Electric brakes |
| Wheel bolt pattern | 6 on 5.5 in. |
| Lubrication | Dexter EZ-Lube |
| Condition | New — stored inventory |
| Availability | Local pickup only — Seneca, IL |
R&P Knowledge Hub
What makes a Torflex axle different?
A Dexter Torflex axle uses rubber torsion suspension rather than a traditional leaf-spring arrangement. Each suspension arm operates through rubber elements contained within the axle assembly, allowing wheel movement without conventional spring hangers, shackles or equalizers.
This design offers fewer external suspension wear components and can provide smoother suspension response when properly matched to the trailer and load.
Understanding the axle measurements
Hub Face — 93.5": The distance between the wheel-mounting faces of the hubs. This measurement helps establish wheel positioning, tire clearance and trailer track width.
Outside Bracket — 73": The outside-to-outside measurement of the torsion mounting brackets. This is not the same as spring-center spacing on a conventional leaf-spring axle.
Start Angle — 22.5° Up: The specified unloaded orientation of the torsion suspension arms. Start angle influences installed geometry and available suspension travel. It must be considered alongside the trailer frame position, tire clearance and intended ride height.
Why exact matching matters
Trailer axles are measurement-specific components. Two axles with the same weight rating and wheel bolt pattern may still have entirely different mounting arrangements, hub-face dimensions or suspension geometries.
Do not select a replacement solely by trailer manufacturer, model year, axle capacity or wheel bolt pattern.
Features
- Genuine Dexter #11 Torflex torsion axle
- 5,200 lb rated axle capacity
- Independent rubber torsion suspension action
- 93.5-inch hub-face measurement
- 73-inch outside-bracket measurement
- 22.5-degree up starting angle
- Electric brake configuration
- 6 on 5.5-inch wheel bolt pattern
- Dexter EZ-Lube lubrication provisions
- Reduced dependence on conventional leaf-spring suspension components
What's Included
| QTY | COMPONENT | DESCRIPTION |
|---|---|---|
| 1 | Dexter #11 Torflex axle assembly | 5,200 lb rated axle with integrated rubber torsion suspension |
| Set | Hub and brake configuration | Electric brake setup with 6 on 5.5-inch hub pattern and EZ-Lube provisions |
Wheel and tire assemblies, brake controller, trailer wiring and installation labor are not included. Confirm any loose mounting hardware directly with R&P before pickup.
Before replacing a Torflex axle, inspect the existing axle for uneven wheel position, abnormal tire wear, deteriorated suspension action, bent mounting components, damage around the axle brackets or evidence of previous overloading.
When installing a replacement, verify the mounting bracket configuration, frame support, arm orientation, ride height, tire clearance, brake compatibility and wheel load rating. Use appropriate manufacturer-approved attachment procedures and fastener specifications.
Inspect stored inventory before installation, including hub rotation, bearing condition, seals, brake wiring and exposed metal surfaces. Cosmetic surface oxidation from storage should be distinguished from structural damage or component deterioration.
Before You Buy
Verify the following dimensions and specifications against your current axle or trailer engineering requirements:
- 93.5-inch hub face — confirm wheel position and tire clearance.
- 73-inch outside bracket — confirm mounting location and bracket orientation.
- 22.5-degree up start angle — confirm ride height and suspension geometry.
- 5,200 lb capacity — confirm appropriate load rating for the trailer.
- 6 on 5.5-inch bolt pattern — confirm wheel compatibility.
- Electric brakes — confirm the trailer braking system is compatible.
- EZ-Lube — follow proper bearing lubrication and maintenance procedures.
Important: Hub-face and outside-bracket measurements alone do not confirm the mounting bracket style or fitment. Compare the complete axle configuration before purchase.
Local Pickup Information
This axle is offered as an in-store exclusive at R&P Carriages in Seneca, Illinois. Because of its size and application-specific configuration, pickup allows customers to verify the product and arrange appropriate transportation.
R&P Carriages
270 E. Jackson Street
Seneca, IL 61360
LOCAL PICKUP ONLY — NO SHIPPING THROUGH THIS LISTING
Thank You For Choosing R&P Carriages As Your Online Shopping Source!
Ask R&P About This Item
Call, text, or send your measurements. Your inquiry will include this item and its SKU.
Close Specifications Form
Include the measurements you have. This inquiry automatically identifies the product and SKU.
Need help with wheels, tires or running gear?
Our trailer service team can help with running-gear and trailer repair needs.
How to Get It
Collect this item from our Seneca location. Please confirm availability before traveling.
Pick Up at R&P Carriages
This exact item is available from our Seneca, Illinois location and is not set up for standard shipping.
Seneca, IL 61360 R&P Carriages
Please confirm measurements and availability before making the trip. We want to make sure the item waiting here is the one you need.