Master Lock Fixed Ball Mount – 2" Drop / 1" Rise – 7K – Stainless Steel
Stainless steel fixed ball mount from Master Lock with a 2" drop, 1" rise, and 7,000 lb rated capacity. Built for trailer towing setups where the receiver height and coupler height require a fixed drop or rise configuration.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Brand | Master Lock |
| Product Type | Fixed ball mount |
| Drop | 2" |
| Rise | 1" |
| Rated Capacity | 7,000 lb |
| Material / Finish | Stainless steel |
| Quantity Included | 1 fixed ball mount |
| Part Number / SKU | Not specified |
Fitment / Application
| Category | Details |
|---|---|
| Application | Trailer towing ball mount applications |
| Primary Fit | Verify receiver size, hitch pin hole fitment, trailer ball size, and towing capacity before ordering |
| Height Adjustment | Fixed 2" drop or 1" rise orientation |
| Important Note | Do not exceed the lowest-rated component in the towing system, including hitch, vehicle, ball mount, hitch ball, coupler, and trailer. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| Fixed Ball Mount Design | Simple, solid towing setup for applications that do not require adjustable height changes. |
| 2" Drop / 1" Rise | Helps match trailer coupler height to the tow vehicle hitch height. |
| 7,000 lb Rated Capacity | Suitable for properly matched towing setups within the stated rating. |
| Stainless Steel Construction | Clean corrosion-resistant appearance for trailer towing applications. |
Overview
This Master Lock fixed ball mount is designed for trailer towing applications requiring a 2" drop or 1" rise. The stainless steel construction provides a clean, durable appearance, while the 7,000 lb rating supports properly matched towing combinations where all system components are rated accordingly.
R&P Service Insight
Ball mount selection should be based on trailer coupler height, tow vehicle receiver height, and total towing-system capacity. A fixed ball mount is a good choice when the vehicle and trailer combination stays consistent.
- Check the Drop / Rise: Measure from the ground to the top of the receiver opening and compare it to the trailer coupler height when the trailer is level.
- Match the Rating: The towing setup is limited by the lowest-rated part in the system.
- Verify the Hitch Ball: Confirm trailer ball diameter, shank size, and rating before installation.
R&P Knowledge Hub
Compatibility: Designed for trailer towing setups where the required hitch height matches a 2" drop or 1" rise. Verify receiver fitment, ball size, pin hole fitment, and tow rating before ordering.
Vehicle / System Fit: Intended for tow vehicles and trailers using a compatible receiver hitch and properly rated trailer ball.
Installation Notes: Install using the correct hitch pin and clip or locking hitch pin. Confirm that the ball mount is fully seated in the receiver and that all towing components are secured before use.
Performance Insight: Using the correct drop or rise helps keep the trailer level, which supports better towing stability, coupler alignment, and load distribution.
Brand & Fitment Note
Selling Brand: Master Lock
Application Reference: Trailer towing ball mount applications requiring a fixed 2" drop or 1" rise.
What This Means: This listing is for one Master Lock fixed ball mount. It is not an adjustable hitch, weight distribution shank, or pintle mount.
Before Ordering: Verify receiver size, hitch ball size, hitch ball shank compatibility, trailer coupler height, trailer weight, and vehicle towing capacity.
R&P Repair Insight
A ball mount should be replaced if it is bent, cracked, heavily worn at the pin hole, damaged at the ball platform, or no longer matches the trailer height needed for level towing.
- Receiver Fit: Confirm the shank fits the receiver properly without excessive looseness or interference.
- Ball Mount Height: A mismatched drop or rise can leave the trailer nose-high or nose-low.
- Hardware Check: Inspect the hitch pin, clip, lock, ball nut, and trailer ball before each towing use.
Features
Master Lock Fixed Ball Mount
Brand-name fixed ball mount for trailer towing applications where a non-adjustable drop or rise is preferred.
2" Drop / 1" Rise
Can be positioned to provide either a 2" drop or 1" rise depending on the tow vehicle and trailer height.
7,000 lb Rating
Rated for towing setups within the stated 7,000 lb capacity when matched with compatible towing components.
Stainless Steel Construction
Stainless steel finish provides a clean look and corrosion-resistant appearance for repeated towing use.
Included Components
| Quantity | Item |
|---|---|
| 1 | Master Lock fixed ball mount, 2" drop / 1" rise, 7K, stainless steel |
| Not specified | Trailer ball, hitch pin, clip, lock, and installation hardware are not specified in the provided listing information. Verify included components before ordering. |
