Heavy-Duty Trailer Suspension Kit
ALKO / Lippert / Rockwell 10K GD Equalizer Trailer Kit With Hangers
Heavy-duty equalizer and hardware kit for compatible 10K–16K trailer axle suspension applications. Designed for use where the listed measurements, hanger style, spring width, and hardware sizes match your existing setup.
Part Number: SHK-5000GD-KIT 10K–16K Application Complete Kit
Key Measurements & Specs
| Specification |
Detail |
| Part Number |
SHK-5000GD-KIT |
| Product Type |
10K GD equalizer kit |
| Equalizer Length |
15.75" long |
| Spring Width |
2.5" wide spring |
| Application Range |
Rated 10K–16K |
| Quantity Included |
Complete kit with equalizers, hanger weldments, bolts, and lock nuts |
Fitment / Application
| Category |
Details |
| Primary Application |
Heavy-duty trailer suspension systems using 10K GD equalizers |
| Referenced Fits |
Fits many Lippert axles; fits most Rockwell / Quality and ALKO 10K–16K axles |
| Equalizer References |
5000GD; ALKO # A8319 and A8320 |
| Fitment Method |
Verify equalizer length, spring width, hanger layout, bolt size, and axle rating before ordering |
Top Features
| Feature |
Buyer Benefit |
| Complete Kit |
Includes matched equalizers, hanger weldments, bolts, and lock nuts for the listed setup |
| Heavy-Duty Rating |
Built for 10K–16K suspension applications where specifications match |
| Known Part References |
Includes 5000GD equalizers with ALKO A8319 and A8320 reference numbers |
| Service-Friendly Hardware |
Includes properly sized equalizer bolts, spring eye bolts, and matching lock nuts |
Overview
The SHK-5000GD-KIT is a heavy-duty trailer suspension equalizer kit for compatible ALKO, Lippert, Rockwell, and Quality trailer axle applications. This kit includes two 5000GD equalizers, center spring hanger weldments, equalizer bolts, spring eye bolts, and matching lock nuts for 10K–16K suspension setups where the measurements and hardware match.
R&P Service Insight
Heavy-duty suspension parts should be matched by measurement, not by axle brand name alone. Before ordering, compare your existing equalizer length, spring width, hanger style, and bolt dimensions against the kit contents below.
-
Equalizer Check: Confirm your current equalizer measures approximately 15.75" long.
-
Spring Width: This kit is listed for 2.5" wide spring applications.
-
Hardware Match: Compare bolt diameter, thread size, and length before installation.
R&P Knowledge Hub
Compatibility: Listed for many Lippert axles and most Rockwell / Quality and ALKO 10K–16K axle applications where the dimensions and suspension layout match.
System Fit: Intended for heavy-duty trailer suspension systems using 10K GD equalizers and 2.5" wide springs.
Installation Notes: Inspect hangers, spring eyes, equalizer holes, and related suspension components before installing new hardware.
Performance Insight: Replacing worn equalizers and hardware together helps restore proper suspension movement when the original parts are worn, elongated, damaged, or mismatched.
Brand & Fitment Note
Selling Brand: R&P Carriages curated heavy-duty trailer suspension kit.
Application Reference: ALKO, Lippert, Rockwell, and Quality names are used as application and compatibility references only.
What This Means: This listing is for the SHK-5000GD-KIT suspension equalizer kit, not a guaranteed OEM-branded kit unless specifically stated on the product packaging or invoice.
Before Ordering: Verify equalizer length, hanger style, spring width, bolt sizes, axle rating, and included components before installation.
R&P Repair Insight
Equalizer kits are commonly replaced during suspension rebuilds, axle service, or when worn hardware causes excess movement. If one side of the trailer suspension is worn, inspect both sides before ordering parts.
-
Check for Wear: Look for elongated bolt holes, worn equalizer eyes, bent hangers, or loose hardware.
-
Match Both Sides: Compare the suspension components on both sides of the trailer to confirm the correct kit style.
-
Confirm Hardware: This kit includes both 1"-8 and 0.75"-10 hardware; verify your trailer uses these sizes.
Features
10K GD Equalizer Kit
Built around the 5000GD equalizer for compatible heavy-duty trailer suspension applications.
15.75" Equalizer Length
Designed for applications using 15.75" long equalizers and 2.5" wide springs.
Includes Center Spring Hangers
Comes with two A7416 weldment center spring hangers for 10K applications.
Matched Bolts & Lock Nuts
Includes equalizer bolts, spring eye bolts, and matching lock nuts for the listed components.
Included Components
| Quantity |
Part / Component |
Details |
| 2 |
5000GD Equalizers |
Lippert / Rockwell / ALKO equalizers; ALKO # A8319 and A8320; rated 10K–16K; 15.75" long; for 2.5" wide spring applications |
| 2 |
A7416 Weldment Center Spring Hangers |
Center spring hangers for 10K applications |
| 2 |
007-359-00 Equalizer Bolts |
Hex head; 1"-8 x 6.50"; dry zinc; 10K GD application |
| 2 |
007-264-00 Spring Eye Bolts |
Hex head; 0.75"-10 x 4.50"; dry; 10K GD application |
| 2 |
006-112-00 Lock Nuts |
1.0"-8 lock nuts; fits 007-359-00 equalizer bolts |
| 2 |
006-113-00 Lock Nuts |
0.75"-10 lock nuts; fits 007-264-00 spring eye bolts |
Important Fitment Note: Trailer suspension parts should be verified by measurement before ordering. Confirm equalizer length, spring width, hanger layout, bolt diameter, thread size, axle rating, and overall suspension configuration before installation.
SHK-5000GD-KIT, 5000GD equalizer kit, ALKO A8319, ALKO A8320, 10K GD equalizer kit, 10K trailer suspension kit, 16K trailer suspension parts, Lippert axle equalizer kit, Rockwell axle equalizer kit, Quality axle suspension kit, A7416 center spring hanger, 007-359-00 equalizer bolt, 007-264-00 spring eye bolt, 006-112-00 lock nut, 006-113-00 lock nut, heavy duty trailer equalizer kit, 2.5 inch wide spring equalizer kit
