Heavy-Duty Trailer Suspension — Front Slipper Spring Hangers
Two - Front Hanger for 3" Slipper Springs — 6-1/4" Tall — 1" Bolt Hole
Lot of 2 Dexter-made steel front hangers for heavy-duty trailer suspension setups using 3" wide slipper springs. Designed for 10,000-lb and 12,000-lb Dexter axle applications where the hanger height, spring width, and bolt size match your trailer.
SKU: 28-67-4LOTOF2 Lot of 2 Front Hangers 3" Slipper Spring / 1" Bolt Hole
Overview
This front hanger lot is built for heavy-duty trailer suspension repairs, fabrication, and service work using 3" wide slipper springs. Each hanger suspends the spring from the trailer frame and creates the front pivot point your leaf spring needs to flex properly under load. With a 6-1/4" overall height and 1" bolt hole, this hanger is intended for demanding 10,000-lb and 12,000-lb Dexter axle suspension setups where the dimensions match the existing trailer configuration.
R&P Service Insight
A front slipper spring hanger is a geometry-critical suspension part. Height, spring width, and bolt diameter must match the trailer setup so the spring can move correctly without binding, walking, or changing ride height.
-
Spring Width: Built for common heavy-duty 3" wide slipper springs.
-
Suspension Geometry: The 6-1/4" height helps set spring position and ride height under the trailer frame.
-
Heavy Hardware: The 1" bolt hole accepts large-diameter attachment hardware for heavy suspension loads. Bolt and hardware are sold separately.
R&P Knowledge Hub
Compatibility: Designed for 3" wide slipper springs used in heavy-duty trailer suspension systems.
Trailer / System Fit: Intended for trailers with 10,000-lb and 12,000-lb Dexter axle suspension setups where hanger dimensions match.
Installation Notes: Verify spring width, hanger height, bolt diameter, axle rating, frame location, and suspension layout before ordering or welding/installing.
Performance Insight: A correctly matched front hanger keeps the slipper spring aligned so the suspension can flex predictably under load.
Brand & Fitment Note
Selling Brand: R&P Carriages
Application Reference: Dexter axle names and capacity references in this listing describe compatibility, fitment target, and suspension application only where measurements and configuration match.
What This Means: This listing is for a front slipper spring hanger lot, sold as a pair of 2 hangers under R&P SKU 28-67-4LOTOF2.
Before Ordering: Verify spring width, hanger height, bolt hole diameter, axle rating, suspension style, frame mounting position, and required hardware before installation.
R&P Repair Insight
Replace or match spring hangers carefully. A hanger that is too short, too tall, or built for the wrong spring width can change axle alignment, ride height, and spring movement.
-
Check Existing Height: Confirm the 6-1/4" hanger height matches the setup being repaired or built.
-
Check Spring Width: This hanger is for 3" wide slipper springs, not narrow light-duty springs.
-
Check Bolt Size: This hanger uses a 1" bolt hole. Bolt, nut, bushing, and related mounting hardware are not included unless separately stated.
Features
Built for Heavy Suspension Loads
Designed for heavy-duty 10,000-lb and 12,000-lb Dexter axle suspension setups where the spring width, height, and bolt hole match the trailer.
Made for 3" Slipper Springs
Matches the common heavy-duty 3" slipper spring width to help keep the spring aligned through the suspension cycle.
6-1/4" Tall Front Hanger
Sets the spring position under the trailer frame and helps maintain proper suspension geometry and ride height.
1" Bolt Hole
Accepts large-diameter suspension hardware for a secure spring attachment point. Mounting bolt and hardware are sold separately.
Specifications
| Specification |
Detail |
| SKU |
28-67-4LOTOF2 |
| Brand |
R&P Carriages |
| Product Type |
Front slipper spring hanger |
| Quantity |
Lot of 2 hangers |
| Application |
Heavy-duty trailer suspension with 3" wide slipper springs |
| Material / Finish |
Steel hanger; finish not specified |
| Height |
6-1/4" tall |
| Bolt Hole Diameter |
1" |
| Spring Compatibility |
Fits 3" wide slipper springs |
| Axle Application |
Designed for 10,000-lb and 12,000-lb Dexter axle suspension setups |
| Country of Origin |
Made in USA |
Fitment / Application
| Category |
Details |
| Vehicle / System |
Heavy-duty trailer leaf spring suspension |
| Primary Fit |
3" wide slipper spring setups |
| Axle Rating Reference |
10,000-lb and 12,000-lb axle applications |
| Hanger Position |
Front hanger; suspends spring from trailer frame |
| Notes |
Verify existing hanger height, spring width, bolt hole size, frame layout, and axle/suspension configuration before ordering. Welding or installation should be performed by a qualified trailer repair technician. |
Included Components
| Quantity |
Item |
| 2 |
Front hangers for 3" wide slipper springs |
| Not Included |
1" mounting bolts, nuts, bushings, weld-on hardware, and related installation hardware are sold separately unless specifically stated elsewhere. |
Thank You For Choosing R&P Carriages For Your Online Shopping Source!
Final fitment depends on matching the existing suspension layout. Verify hanger height, spring width, bolt hole diameter, axle rating, frame mounting location, and included components before installation. Dexter references in this listing describe the selling brand and compatible suspension application details provided for this item.
Dexter 28-67-4LOTOF2 front hanger lot of 2, Dexter front slipper spring hanger, 3 inch slipper spring hanger, 6-1/4 inch tall front hanger, 1 inch bolt hole spring hanger, 10K Dexter axle hanger, 12K Dexter axle hanger, heavy duty trailer spring hanger, steel trailer suspension hanger, made in USA slipper spring hanger
