POWERED BY R&P CARRIAGES

R & P Carriages

Tandem Slipper Spring Hanger Kit for 2-Inch Springs with 12-Inch Equalizers (23002)

$142.15
Contact us for availability

Enter the quantity you need to check availability.

Quantity options
Selected quantity subtotal $142.15
Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: 23002
PRODUCT INFORMATION

Product Details

Tandem-Axle Slipper Spring Suspension Hardware

Tandem Slipper Spring Hanger Kit for 2-Inch Springs with 12-Inch Equalizers

A heavy-duty tandem-axle suspension hardware kit for compatible trailers using 2-inch-wide slipper springs. Includes front, center and rear hangers, two 12-inch equalizers, greaseable equalizer bolts and attaching hardware.

R&P SKU: 23002 2-Inch Slipper Springs 12-Inch Equalizers Tandem-Axle Kit

Key Measurements & Specs

Specification Detail
Part Number / SKU 23002
Product Type Tandem slipper spring hanger kit
Spring Type Slipper spring
Spring Width 2 inches
Equalizer Size 12 inches long × 3.78 inches wide
Equalizer Center Bolt 7/8-inch greaseable bolt
Quantity Included 1 complete component kit

Fitment / Application

Category Details
Trailer Configuration Tandem-axle trailer suspension
Spring Application Compatible 2-inch-wide slipper springs
Comparable Kit References Comparable in general application to BAK-1 and APT6SE-GS3 where all measurements match
Hanger References HG-15843-F and HG-15843-R are application references only
Fitment Method Verify spring width, hanger dimensions, bolt heights, equalizer size and suspension layout
Installation Weld-on hangers require proper positioning and welding

Top Features

Feature Buyer Benefit
Complete Hanger Set Includes front, center and rear hanger components for a tandem suspension layout.
12-Inch Equalizers Provides the specified equalizer size for compatible slipper spring systems.
Greaseable Bolts Includes two 7/8-inch greaseable bolts for the equalizer center mounting points.
Attaching Hardware Includes eight 9/16-inch bolts, eight matching nuts and two cotter pins.

Overview

The R&P Carriages 23002 hanger kit brings together the primary hanger, equalizer and attaching components needed for a compatible tandem-axle trailer suspension using 2-inch-wide slipper springs. The kit includes two front hangers, two center hangers, two rear hangers, two 12-inch equalizers, two greaseable equalizer bolts, eight 9/16-inch bolts, eight matching nuts and two cotter pins.

R&P Service Insight

A hanger kit should be matched by its actual suspension geometry rather than by a comparable kit number alone. Measure the existing components and record their mounting positions before removing or replacing the suspension hardware.

  • Spring Check: Confirm that the trailer uses 2-inch-wide slipper springs.
  • Equalizer Check: Compare the 12-inch length, 3.78-inch width and mounting-hole locations with the existing equalizers.
  • Hanger Check: Verify each hanger’s width, length and top-to-bolt-center height before welding.

R&P Knowledge Hub

Compatibility: Designed for compatible tandem-axle suspension systems using 2-inch-wide slipper springs and 12-inch equalizers.

System Fit: The front, center and rear hangers create the frame attachment points for the slipper spring suspension. The equalizers mount beneath the center hangers.

Installation Notes: Record the original axle spacing and hanger locations before removing the old components. The replacement hangers must be aligned and welded securely to the trailer frame.

Performance Insight: The equalizers allow movement between the two slipper spring assemblies as the tandem axles travel over changes in the road surface.

Brand & Fitment Note

Selling Brand: R&P Carriages component kit

Application References: BAK-1, APT6SE-GS3, HG-15843-F and HG-15843-R are supplied as general comparison or application references. They do not establish an exact interchange.

What This Means: This listing is for the R&P Carriages 23002 component kit. It is not represented as an OEM-branded BAK-1 or APT6SE-GS3 kit.

Before Ordering: Compare every hanger dimension, bolt height, bolt-hole size, equalizer measurement, spring width and mounting location with the trailer’s existing suspension.

R&P Repair Insight

Suspension geometry affects axle position and spring movement. Do not assume that two kits are interchangeable based only on spring width or equalizer length.

  • Measure Before Removal: Record the center-to-center hanger locations and axle spacing before cutting old hangers from the frame.
  • Inspect the Frame: Check the intended mounting areas and surrounding frame structure before installing new weld-on hangers.
  • Verify Hardware: Confirm that all required nuts, retainers and installation hardware are present before beginning the repair.

Features

Tandem Slipper Spring Layout

Component selection is arranged for a compatible tandem-axle trailer using 2-inch-wide slipper springs.

Front, Center & Rear Hangers

Includes two hangers for each of the three required mounting positions.

12-Inch Equalizer Pair

Includes two EQ-12 equalizers measuring 12 inches long by 3.78 inches wide.

Greaseable Center Hardware

Two GEB-78 greaseable bolts provide the specified 7/8-inch equalizer center mounting hardware.

Included Components

Quantity Part Specifications
2 H4.375F Front Hangers 2.25 inches wide; 3.625-inch bolt height; 4 inches long
2 H-4.5-SQ4 Center Hangers 3 inches wide; 3.625-inch bolt height; 3.062 inches long; 0.9-inch square hole
2 H6R Rear Hangers 2.25 inches wide; 5-inch bolt height; 4 inches long; 5/8-inch bolt holes
2 EQ-12 Equalizers 12 inches long × 3.78 inches wide; designed for the listed GEB-78 center bolt
2 GEB-78 Greaseable Bolts 7/8-inch diameter; fits the EQ-12 center mounting location
8 91635B Bolts 9/16"-18 thread; 3.5 inches long; 1/2-inch thread length
8 SB-LN-9 Nuts 9/16"-18 thread
2 165649 Cotter Pins 1/8 inch × 1-3/4 inches
Important Fitment Note: Comparable kit and hanger numbers are application references only. Before ordering, verify the 2-inch spring width, 12-inch equalizer dimensions, hanger widths, hanger lengths, top-to-bolt-center heights, bolt-hole sizes, original axle spacing and every included component. Welding and final suspension alignment should be completed by a qualified installer.
R&P Carriages 23002 tandem slipper spring hanger kit, 2 inch slipper spring hanger kit, 12 inch trailer equalizer kit, tandem axle suspension hanger hardware, EQ-12 equalizer, GEB-78 greaseable equalizer bolt, H4.375F front hanger, H-4.5-SQ4 center hanger, H6R rear hanger, comparable application to BAK-1, comparable application to APT6SE-GS3, HG-15843-F application reference, HG-15843-R application reference

WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTS GOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke Heiser OCT 2026
RV KEYS GOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa R OCT 2026
AXLE & LEAF SPRINGS GOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory Strubert OCT 2026
Showing 3 reviews

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.