AL-KO / Hayes 10K–12K Trailer Disc Brake Caliper Repair Kit for One Caliper
Seal and dust boot repair kit for one AL-KO / Hayes 10,000 lb or 12,000 lb hydraulic disc brake caliper. Includes the piston seal and dust boot components needed to service one compatible caliper.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | K71-832-00 |
| Product Type | Hydraulic disc brake caliper repair kit |
| Axle Rating Reference | 10,000 lb and 12,000 lb AL-KO / Hayes disc brake caliper applications |
| Older Reference Number | K080862 |
| Material / Finish | Rubber |
| Quantity Included | 1 repair kit for one brake caliper |
Fitment / Application
| Category | Details |
|---|---|
| Brake System | Hydraulic disc brake calipers on compatible AL-KO / Hayes 10K and 12K trailer axle applications |
| Primary Fit | AL-KO / Hayes 10,000 lb and 12,000 lb disc brake calipers |
| Caliper References | Redline BP18-060 and BP18-061; AL-KO by Dexter 089-052-00 and 089-053-00 |
| Fitment Method | Verify your caliper assembly number and compare the existing seal and dust boot style before ordering |
| Important Note | This kit repairs one caliper. To service one axle with two calipers, order two kits. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| One-Caliper Kit | Correct quantity language for a single brake caliper repair |
| Seal Components Included | Includes the internal caliper seals and dust boots needed for compatible caliper service |
| 10K–12K Application | Built around heavy-duty AL-KO / Hayes hydraulic disc brake axle applications |
| Cross-Reference Friendly | Useful when matching by AL-KO / Hayes, Redline, or AL-KO by Dexter caliper references |
Overview
This K71-832-00 disc brake caliper repair kit is used to service one compatible AL-KO / Hayes 10K or 12K hydraulic disc brake caliper. The kit includes two caliper seals and two dust boots / dust seals for rebuilding the seal components in one caliper assembly. For a complete axle service with two calipers, two kits are required.
R&P Service Insight
Brake caliper repair kits should be matched by caliper application, not axle capacity alone. Before ordering, confirm the caliper assembly number and inspect the condition of the piston, bore, bleeder, pads, rotor, and hydraulic system.
- Quantity Check: One kit repairs one brake caliper only.
- System Check: Hydraulic disc brake systems must be inspected and bled properly after caliper service.
- Fitment Check: Match the caliper reference number before assuming fitment on a 10K or 12K axle.
R&P Knowledge Hub
Compatibility: Designed for compatible AL-KO / Hayes 10,000 lb and 12,000 lb hydraulic disc brake caliper applications.
Vehicle / System Fit: Commonly used on heavy-duty trailer hydraulic disc brake systems, including boat trailer and equipment trailer brake applications where the matching caliper is installed.
Installation Notes: Confirm caliper condition before rebuilding. If the piston, caliper bore, bleeder screw, or mounting hardware is damaged, additional parts or a complete caliper replacement may be needed.
Performance Insight: Seal and dust boot condition matters because these parts help the caliper maintain hydraulic pressure and protect the piston area from contamination.
Brand & Fitment Note
Selling Brand / Application: AL-KO / Hayes 10K–12K disc brake caliper application; sold by R&P Carriages.
Application Reference: AL-KO, Hayes, Dexter, and Redline names are used here as fitment and cross-reference terms for compatible brake caliper applications.
What This Means: This listing is for a disc brake caliper repair kit for the listed compatible applications. Do not assume fitment by axle rating alone.
Before Ordering: Verify your caliper part number, axle brake system, seal style, and included components before installation.
R&P Repair Insight
This kit is intended for seal-service work on a compatible caliper, not for replacing every brake component at the wheel end. The caliper, pads, rotor, mounting hardware, piston, and brake fluid are not included unless separately listed.
- Confirm the Caliper: Check for Redline BP18-060 / BP18-061 or AL-KO by Dexter 089-052-00 / 089-053-00 application references.
- Order Correct Quantity: One caliper uses one kit; one axle with two calipers requires two kits.
- Inspect Before Rebuild: A leaking or sticking caliper may also require piston, bore, pad, rotor, or hydraulic system inspection.
Features
Fits AL-KO / Hayes 10K–12K Calipers
Application-focused repair kit for compatible 10,000 lb and 12,000 lb AL-KO / Hayes hydraulic disc brake calipers.
Repairs One Brake Caliper
Each kit is packaged for one caliper repair. Use two kits when servicing both calipers on a single axle.
Includes Seal and Dust Boot Components
Includes two 010-260-00 caliper seals and two 010-261-00 caliper dust boots / dust seals.
Helpful Cross-Reference Fitment
Useful for matching compatible Redline BP18-060 / BP18-061 and AL-KO by Dexter 089-052-00 / 089-053-00 caliper applications.
Included Components
| Quantity | Item |
|---|---|
| 2 | 010-260-00 caliper seals |
| 2 | 010-261-00 caliper dust boots / dust seals |
| Not Included | Caliper, piston, brake pads, rotor, mounting hardware, brake fluid, and additional wheel-end brake components |
