Two 4K 8-Leaf Trailer Leaf Springs - 26" Eye to Eye - 1.75" Wide
Lot of two 4000 lb capacity trailer leaf springs for compatible 8000 lb trailer axle beam suspension applications. Each spring measures 26" eye to eye, 1.75" wide, and features an 8-leaf construction.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | DE-AWS8-LOTOF2 |
| Brand | R&P Carriages |
| Product Type | Trailer Leaf Spring |
| Primary Measurement | 26" eye to eye x 1.75" wide |
| Capacity | 4000 lb per spring |
| Leaf Count | 8 leaf |
| Material / Finish | Steel leaf spring assembly |
| Quantity Included | 2 leaf springs |
Fitment / Application
| Category | Details |
|---|---|
| Vehicle / Trailer / System | Trailer leaf spring suspension |
| Primary Fit | 8000 lb trailer axle beam applications using 26" x 1.75" 4000 lb springs |
| Common Uses | Equipment trailers, utility trailers, enclosed trailers, and other heavy trailer suspension setups when measurements match |
| Fitment Method | Match spring length, spring width, leaf count, axle rating, hanger spacing, and suspension style before ordering |
| Important Note | Verify existing spring dimensions and suspension layout before purchase. Hardware is not included unless separately listed. |
Top Features
| Feature | Buyer Benefit |
|---|---|
| Lot of Two Springs | Supports paired axle-end replacement for more even suspension height and load support. |
| 4000 lb Capacity Each | Matched pair supports an 8000 lb spring-capacity axle setup when used in the correct suspension system. |
| 8-Leaf Construction | Heavy trailer spring configuration for proper load support when matched to the trailer application. |
| 26" x 1.75" Size | Buyer can compare directly against the existing spring before ordering. |
Overview
This listing includes two trailer leaf springs for compatible 8000 lb axle beam suspension setups. Each spring is rated at 4000 lb capacity and features an 8-leaf construction, 26" eye-to-eye length, and 1.75" spring width. These replacement suspension springs are intended for trailer applications where the original spring dimensions, capacity, and suspension layout match this listing.
R&P Service Insight
Leaf spring replacement should be matched by measurement, capacity, and suspension layout. Do not rely on appearance alone when ordering replacement springs.
- Measure First: Confirm the 26" eye-to-eye length on the existing spring.
- Match Capacity: Each spring in this listing is rated at 4000 lb capacity.
- Check Hardware: Inspect hangers, shackles, bolts, bushings, equalizers, and U-bolts when replacing springs.
R&P Knowledge Hub
Compatibility: Fits trailer suspension setups requiring 26" eye-to-eye, 1.75" wide, 8-leaf springs rated at 4000 lb each.
Vehicle / System Fit: Intended for trailer 8000 lb axle beam suspension applications when dimensions and capacity match.
Installation Notes: Springs should be installed with properly matched suspension hardware and torqued according to trailer or component specifications.
Performance Insight: A matched pair of 4000 lb springs supports an 8000 lb spring-capacity axle setup when installed in the correct suspension system.
Brand & Fitment Note
Selling Brand: R&P Carriages
Application Reference: Trailer suspension leaf spring replacement for 8000 lb axle beam applications.
What This Means: This listing is for two matching 4000 lb capacity trailer leaf springs.
Before Ordering: Verify spring length, spring width, leaf count, axle rating, hanger spacing, suspension style, and required hardware before purchase.
R&P Repair Insight
When one leaf spring is worn, flattened, cracked, or sagging, the opposite side may also be fatigued. Replacing springs in pairs helps maintain even suspension height and load support across the axle.
- Check Spring Arch: Compare both sides for sagging or uneven ride height.
- Inspect Bushings: Worn spring eye bushings can cause noise, movement, and uneven suspension wear.
- Inspect U-Bolts: U-bolts should generally be replaced if removed during suspension service.
Features
Lot of Two Springs
This listing includes two matching trailer leaf springs for paired axle-end replacement.
4000 lb Capacity Each
Each spring is rated at 4000 lb capacity for compatible 8000 lb axle beam suspension applications.
8-Leaf Construction
Heavy trailer spring configuration with 8 leaves for proper load support when matched to the trailer suspension.
26" x 1.75" Size
Measures 26" long eye to eye with a 1.75" spring width for measurement-based replacement.
Specifications
| Specification | Detail |
|---|---|
| Part Number | DE-AWS8-LOTOF2 |
| Listing SKU | DE-AWS8-LOTOF2 |
| Brand | R&P Carriages |
| Product Type | Trailer Leaf Spring |
| Quantity Included | 2 leaf springs |
| Application | 8000 lb trailer axle beam suspension applications |
| Material / Finish | Steel leaf spring assembly |
| Key Measurement | 26" eye to eye, 1.75" wide |
Detailed Measurements
| Key Dimension | Measurement |
|---|---|
| Capacity Per Spring | 4000 lb |
| Leaf Count | 8 leaf |
| Eye-to-Eye Length | 26" |
| Spring Width | 1.75" |
Included Components
| Quantity | Item |
|---|---|
| 2 | 4000 lb capacity 8-leaf trailer leaf springs, 26" eye to eye, 1.75" wide |
| Not Included | Mounting hardware, shackles, bolts, bushings, equalizers, U-bolts, and related suspension hardware unless separately purchased |
