POWERED BY R&P CARRIAGES

Unbranded

One 26.25" Hook Slipper Leaf Spring | 7-Leaf, 2" Wide, 4,000 lb Capacity (1403T3)

$95.93
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: 1403T3
PRODUCT INFORMATION

Product Details

R & P Carriages - Need a Trailer Part

One 26.25" Hook Slipper Leaf Spring | 7-Leaf, 2" Wide, 4,000 lb Capacity (1403T3)

Part # 1403T3

Trailer Suspension / Slipper Leaf SpringOne 7 Leaf Trailer Slipper Spring – 2" x 26.25" – 4,000 lb Capacity

Seven-leaf trailer slipper spring for suspension systems using slipper-style hangers or equalizers. Measures 26-1/8" long by 2" wide with a 4,000 lb spring capacity.

Part Number: 1403T3 4,000 lb Spring Capacity 26-1/8" x 2"Key Measurements & SpecsSpecificationDetailPart Number / SKU1403T3Product TypeSlipper leaf springNumber of Leaves7Spring Width2"Overall Length26-1/8"Spring Capacity4,000 lbsQuantity Included1 slipper springFitment / ApplicationCategoryDetailsSystem TypeTrailer slipper spring suspensionTypical Axle RatingCommonly used on 8,000 lb trailer axle applicationsFitment MethodMatch by spring length, width, eye diameter, arch, slipper-end style, and hanger/equalizer configurationImportant NoteVerify measurements before ordering. Leaf springs should generally be replaced in pairs for balanced suspension performance.Top FeaturesFeatureBuyer BenefitSeven-Leaf ConstructionBuilt for trailer suspension support under loaded conditions4,000 lb CapacitySupports one side of a typical 8,000 lb axle suspension setup when properly matched2" Spring WidthMatches common heavy-duty slipper spring hanger and equalizer systemsNylon Eye BushingComes with an installed eye bushing for the spring eye mounting pointOverview

This 1403T3 seven-leaf slipper spring is designed for trailer suspension systems that use slipper-style hangers or equalizers. With a 26-1/8" overall length, 2" spring width, 9/16" eye diameter, and 4,000 lb spring capacity, it is commonly matched to heavy-duty trailer suspension applications using 8,000 lb axles.

R&P Service Insight

Leaf springs are wear items in trailer suspension systems. Repeated loading, road shock, corrosion, and uneven weight distribution can reduce spring arch and cause the trailer to sit low or ride unevenly.

  • Measure First: Confirm spring length, width, eye size, and slipper-end configuration before ordering.
  • Replace in Pairs: Replacing only one spring can leave the suspension uneven if the opposite spring is worn.
  • Inspect Hardware: Check hangers, equalizers, bolts, bushings, and U-bolts during spring replacement.
R&P Knowledge Hub

Compatibility: Best matched by part number, spring length, spring width, eye diameter, slipper-end style, and hanger/equalizer layout.

Vehicle / System Fit: Trailer slipper spring suspension systems using a 2" wide, 26-1/8" slipper spring with 4,000 lb spring capacity.

Installation Notes: Support the trailer safely, unload the suspension, and inspect related suspension components before installing new springs.

Performance Insight: Properly matched springs help restore trailer ride height, suspension travel, and balanced load support across the axle.

Brand & Fitment Note

Selling Brand: R&P Carriages / Need A Trailer Part suspension component listing.

Application Reference: Axle rating and trailer type references are application guides only. Final fitment must be confirmed by measurement and suspension layout.

What This Means: This listing is for one 1403T3 slipper spring, not a complete suspension kit.

Before Ordering: Verify spring dimensions, hanger configuration, axle capacity, and whether additional hardware is needed for installation.

R&P Repair Insight

A flattened, cracked, shifted, or fatigued leaf spring can affect trailer ride height, tire clearance, axle alignment, and load balance. When replacing slipper springs, inspect the entire suspension system rather than only the failed spring.

  • Spring Condition: Look for broken leaves, sagging arch, rust separation, or signs of overload.
  • Mounting Points: Inspect hangers and equalizers for elongation, cracking, or uneven wear.
  • Hardware Check: Confirm the correct bolts, bushings, U-bolts, tie plates, and nuts are in good condition or replaced as needed.
FeaturesSeven-Leaf Slipper Spring

Multi-leaf spring construction designed to support trailer axle load and help absorb road shock during travel.

4,000 lb Spring Capacity

Rated for 4,000 lbs per spring when properly matched to the suspension system and trailer application.

Common Heavy-Duty Trailer Fit

Commonly used on trailers equipped with 8,000 lb axles where the spring dimensions and hanger layout match.

Nylon Eye Bushing Installed

Includes a nylon bushing in the spring eye for the mounting point. Confirm bushing size and hardware compatibility before installation.

Included ComponentsQuantityItem11403T3 seven-leaf slipper spring1Nylon eye bushing installedNot IncludedMounting bolts, nuts, U-bolts, tie plates, hangers, equalizers, and other suspension hardwareMeasurement ReferencePart NumberABCD1403T326-1/8"24-7/8"3"11-3/16"Important Fitment Note: Verify spring length, spring width, eye diameter, slipper-end shape, hanger spacing, equalizer style, axle rating, and included components before installation. For balanced suspension performance and even load distribution, leaf springs should generally be replaced in pairs.Shop Related Slipper Springs1403T3 slipper spring, 7 leaf slipper spring, 4000 lb slipper spring, 4,000 lb trailer leaf spring, 26-1/8 inch slipper spring, 2 inch wide trailer spring, 8000 lb axle slipper spring, trailer suspension leaf spring, nylon eye bushing slipper spring, heavy duty trailer spring replacement
Affordable Pricing
Quality Products
Fast Shipping
Ships from our warehouse
Fitment Help
Real trailer-parts experts
Not sure if this will fit your trailer?
Send us a message – our trailer-parts experts are standing by to help you get the right part the first time.
R & P Carriages  ·  Quality Parts · Quality Service

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.