POWERED BY R&P CARRIAGES

Maxxima

Two - Maxxima 6" Red LED Ultra Thin Stop Tail Brake Lights (M63350R-LOTOF2)

$38.99
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: M63350R-LOTOF2
PRODUCT INFORMATION

Product Details

LED Trailer Stop / Tail / Brake Lights

Two - Maxxima 6" Red LED Ultra Thin Stop Tail Brake Lights

This listing is for two Maxxima M63350-R red LED ultra thin stop, tail, and brake lights. These low-profile 6.5" oval lights are built with sealed electronics, polycarbonate lens and housing construction, and 3-wire 6" leads for trailer lighting applications where the size, wiring, and mounting style match.

Part Number: M63350R-LOTOF2 Quantity: 2 Lights 6.5" x 2.3" x 0.4"

Key Measurements & Specs

Specification Detail
Part Number / SKU M63350R-LOTOF2
Brand Maxxima
Product Type Red LED stop / tail / brake light
Overall Size 6.5" wide x 2.3" high x 0.4" deep
LED Count 14 LEDs
Quantity Included Two lights

Fitment / Application

Category Details
Application Trailer, truck, RV, and utility lighting applications requiring a red stop / tail / brake light
Mounting Style Grommet, tape, or screw mounting where the mounting surface and hole spacing match
Mounting Holes Two 3/16" diameter mounting holes, 5-1/2" center to center
Wiring 3-wire design with 6" leads
Important Note Verify light size, wiring style, mounting method, and mounting hole spacing before ordering.

Top Features

Feature Buyer Benefit
Ultra Thin Profile 0.4" low-profile depth helps create a cleaner, flush-style trailer lighting installation.
Sealed Electronics Designed to help protect the internal electronics from normal trailer-use exposure.
Polycarbonate Build Polycarbonate lens and housing construction for durable exterior lighting use.
Horizontal or Vertical Use Can be used in either orientation when the trailer application allows proper placement and compliance.

Overview

The Maxxima M63350-R is a red LED ultra thin stop, tail, and brake light for trailer and vehicle lighting applications. This two-light listing is a good choice when replacing both matching lights or installing a matched pair on a trailer where a 6.5" x 2.3" red oval light with 3-wire 6" leads is required.

R&P Service Insight

Before replacing trailer lights, match the physical size, wiring style, and mounting pattern. A light can look close in a photo but still require a different grommet, adhesive mount, screw pattern, or wiring setup.

  • Measure First: Confirm the 6.5" width, 2.3" height, and 0.4" depth against your current light or mounting location.
  • Check Wiring: This light uses a 3-wire design with 6" leads.
  • Choose Mounting: These lights can be mounted by grommet, tape, or screws depending on your trailer setup.

R&P Knowledge Hub

Compatibility: Designed for applications that use a red oval LED stop, tail, and brake light with matching dimensions, wiring, and mounting requirements.

Vehicle / System Fit: Trailer, truck, RV, and utility trailer lighting systems where the 12.8 VDC electrical system and 3-wire lead configuration match.

Installation Notes: Verify mounting hole spacing, mounting surface condition, wiring function, and required grommet or tape option before installation.

Performance Insight: The ultra thin 0.4" low-profile design works well where a cleaner surface-mounted or flush-style lighting appearance is desired.

Brand & Fitment Note

Selling Brand: Maxxima

Application Reference: This listing is for replacement or new-install trailer lighting applications where the dimensions, voltage, wiring, and mounting style match the customer’s existing setup.

What This Means: This listing is for two Maxxima M63350-R red LED stop, tail, and brake lights.

Before Ordering: Verify measurements, wiring, mounting method, mounting hole spacing, and included components before installation.

R&P Repair Insight

When replacing trailer stop, tail, or brake lights, most fitment issues come from mismatched mounting style, incorrect wiring identification, or assuming all 6" oval-style lights use the same mounting setup.

  • Mounting Check: Confirm whether your trailer uses grommet mount, tape mount, or screw mount before ordering accessories.
  • Hole Spacing Check: These lights have two 3/16" mounting holes spaced 5-1/2" center to center.
  • Function Check: Confirm stop, tail, and brake wiring functions before final installation.

Features

Ultra Thin 0.4" Low Profile Design

Low-profile depth gives the light a clean installed appearance and reduces protrusion from the mounting surface.

Polycarbonate Lens & Housing

Built with polycarbonate lens and housing construction for trailer and vehicle lighting use.

Completely Sealed Electronics

Sealed electronics help protect the light assembly in exterior trailer lighting applications.

Horizontal or Vertical Usage

Can be mounted horizontally or vertically when the trailer application, wiring, and compliance requirements allow it.

Specifications

Specification Detail
LEDs 14
Width 6.5"
Height 2.3"
Depth 0.4"
DOT / SAE J1395, J1398, J585e
Legal Lighting Codes I6S2T2
Amp Draw 230 mA
Voltage 12.8 VDC
Connector / Wiring 3-wire design with 6" leads
Mounting Grommet, tape, or screws
Mounting Holes Two 3/16" diameter holes, 5-1/2" center to center

Included Components

Quantity Item
2 Maxxima M63350-R red LED ultra thin stop / tail / brake lights
Included Mounting screws and screw hole covers
Optional / Verify Selection Mounting grommet or mounting tape option, depending on the mounting setup ordered
Important Fitment Note: Price is for two lights. Order the mounting option needed for your trailer setup. Verify size, voltage, wiring, mounting method, mounting hole spacing, and trailer light function before installation.
Maxxima M63350-R red LED stop tail brake light pair, M63350R-LOTOF2, two Maxxima red oval LED trailer lights, ultra thin 6.5 inch red LED brake light, 3 wire 6 inch lead trailer light, low profile trailer stop tail light, red LED trailer brake light, 12.8 VDC trailer lighting, DOT SAE red oval LED light, grommet tape screw mount trailer light.

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.