Replacement Handle Shaft and Bushings for Ram 10K–12K Square Jack
Replacement handle shaft for Ram and etrailer square direct-weld sidewind jacks. Designed for TJD-12000 Series jack applications and includes brass bushings for service replacement.
Overview
This replacement handle shaft is made for Ram and etrailer square direct-weld sidewind jacks with a 10,000 lb lift capacity application reference and is designed for TJD-12000 Series jack applications. The crank handle attaches to this shaft, making it a key service replacement when the original shaft is worn, bent, damaged, or missing. The shaft has a durable zinc finish to help resist corrosion and includes brass bushings for proper service replacement.
R&P Service Insight
Handle shaft replacement is a practical repair when the jack body is still serviceable but the sidewind drive hardware needs attention.
- Check Jack Series: Verify TJD-12000 Series compatibility before ordering.
- Check Jack Style: Intended for square direct-weld sidewind jack applications.
- Check Handle Connection: The crank handle attaches to this shaft; inspect the handle and related hardware during repair.
R&P Knowledge Hub
Compatibility: Fits Ram and etrailer square direct-weld sidewind jack applications designed around the TJD-12000 Series handle shaft setup.
Vehicle / System Fit: Used on trailer jack systems, especially heavy-duty direct-weld square jack assemblies with sidewind operation.
Installation Notes: Confirm the existing jack series, shaft length, shaft diameter, and handle attachment style before installation.
Performance Insight: A worn or damaged handle shaft can make cranking difficult, uneven, or unreliable even when the jack leg itself is still usable.
Brand & Fitment Note
Selling Brand: Ram / etrailer compatible replacement part reference
Application Reference: TJD-12000 Series square direct-weld sidewind jacks
What This Means: This listing is for the replacement handle shaft and brass bushings only.
Before Ordering: Match your original shaft to the 12" length, 1" diameter, sidewind configuration, and TJD-12000 Series application.
R&P Repair Insight
When replacing a jack handle shaft, inspect the handle, gears, bushings, cross pin or retaining hardware, and the jack tube for wear or binding. Replacing only the shaft may not solve the issue if the jack gearbox or internal screw assembly is damaged.
- Shaft Condition: Replace if the shaft is bent, worn, seized, or no longer holds the crank handle properly.
- Bushing Area: Confirm the brass bushings seat correctly and that the shaft rotates smoothly after installation.
- Jack Operation: If the jack still binds after replacement, inspect internal gears and screw components.
Key Features
Direct Replacement Shaft
Replaces the handle shaft on compatible Ram and etrailer square direct-weld sidewind jacks.
Designed for TJD-12000 Series
Built for TJD-12000 Series jack applications commonly referenced with 10K–12K heavy-duty jack service parts.
Includes Brass Bushings
Comes with brass bushings for a complete handle shaft replacement service.
Corrosion-Resistant Finish
Durable zinc finish helps resist corrosion in trailer and outdoor service environments.
Specifications
| Specification | Detail |
|---|---|
| Part Number | TJD-12000-SHABUS |
| Listing SKU | TJD-12000-SHABUS |
| Brand | Ram / etrailer compatible reference |
| Product Type | Replacement jack handle shaft |
| Quantity Included | 1 handle shaft with brass bushings |
| Application | Square direct-weld sidewind trailer jacks |
| Material / Finish | Zinc finish; includes brass bushings |
| Key Measurement | 12" long x 1" diameter |
Fitment / Application
| Category | Details |
|---|---|
| Vehicle / System | Trailer jack system |
| Primary Fit | TJD-12000 Series square direct-weld sidewind jacks |
| Secondary Fit / Common Uses | Ram and etrailer square direct-weld jacks with compatible handle shaft dimensions |
| Notes | Verify jack series, sidewind configuration, 12" shaft length, and 1" shaft diameter before ordering. |
Detailed Measurements
| Key Dimension | Measurement |
|---|---|
| Overall Length | 12" |
| Shaft Diameter | 1" |
| Jack Capacity Reference | 10,000 lb lift capacity application reference |
| Jack Series Reference | TJD-12000 Series |
Included Components
| Quantity | Item |
|---|---|
| 1 | Replacement handle shaft |
| 2 | Brass bushings |
Thank You For Choosing R&P Carriages As Your Online Shopping Source!