POWERED BY R&P CARRIAGES

LaVanture

Stainless Steel Gas Spring Strut Rod 20" Long 8" Stroke 20 lb Force (GS8-200-20)

$24.99
Available to order

Enter the quantity you need to check availability.

Not Sure It Fits? Ask a Pro
R&P PARTS GUIDE

At a Glance

  • SKU: GS8-200-20
PRODUCT INFORMATION

Product Details

Gas Spring Strut Rod / RV / Boat / Hatch Support

Stainless Steel Gas Spring Strut Rod 20" Long 8" Stroke 20 lb Force

Stainless steel gas spring strut rod for covers, hatches, doors, RVs, boats, campers, and similar lift-support applications where the length, stroke, force rating, and end style match.

Part Number: GS8-200-20 20" Long / 8" Stroke 20 lb Force

Key Measurements & Specs

Specification Detail
Part Number / SKU GS8-200-20
Product Type Gas spring strut rod / lift support
Length 20" long
Stroke 8" stroke
Force Rating 20 lb force
Material / Finish Stainless steel appearance with nitride shaft feature
End Style Standard 10mm lockable ends
Quantity Included 1 gas spring strut rod

Fitment / Application

Category Details
System Lift-support strut for hatch, cover, door, RV, boat, and camper applications
Primary Fit Replacement for SPD-style and many other gas spring applications where all specs match
Fitment Method Match extended length, stroke, force rating, end style, and mounting points before ordering
Important Note Gas struts must match the application requirements. Incorrect force or length can prevent proper opening, closing, or support.

Top Features

Feature Buyer Benefit
20" Length Matches applications requiring a 20" extended gas spring strut.
8" Stroke Provides the travel range needed for compatible hatch and cover setups.
20 lb Force Light-force support for compatible doors, hatches, covers, and panels.
10mm Lockable Ends Standard end style for many RV, marine, camper, and utility applications.

Overview

This GS8-200-20 stainless steel gas spring strut rod is designed for compatible lift-support applications on covers, hatches, doors, RVs, boats, and campers. It measures 20" long, has an 8" stroke, and is rated at 20 lb force. The stainless steel appearance and nitride shaft feature make it a practical option where corrosion resistance, clean appearance, and dependable lift support matter.

R&P Service Insight

When replacing a gas spring, match the numbers and measurements before ordering. Length, stroke, force rating, and end style all matter.

  • Length Check: Confirm the 20" extended length against the strut being replaced.
  • Force Check: Use a 20 lb force strut only where the application calls for that support rating.
  • End Check: Verify the standard 10mm lockable end style matches your mounting hardware.

R&P Knowledge Hub

Compatibility: Designed as a replacement-style gas spring for compatible SPD-style and similar applications where the measurements and force rating match.

Vehicle / System Fit: Commonly used for RV, camper, boat, hatch, cover, and door lift-support systems.

Installation Notes: Replace gas springs in matched applications. Confirm mounting points, ball/socket size, end style, and operating clearance before installation.

Performance Insight: The 20 lb force rating is intended for lighter lift-support needs. Too much or too little force can affect how the hatch, cover, or door operates.

Brand & Fitment Note

Selling Brand: R&P Carriages replacement-style gas spring strut rod.

Application Reference: SPD and other brand references are used for compatibility-style replacement guidance only.

What This Means: This listing is for one GS8-200-20 gas spring strut rod, not a guaranteed OEM-branded item unless specifically stated.

Before Ordering: Verify extended length, compressed length if needed, stroke, force rating, end style, and mounting hardware before installation.

R&P Repair Insight

Gas springs are often replaced when a hatch, cover, or door will not stay open, opens too quickly, closes too quickly, or no longer has proper lift support.

  • Replace by Spec: Match the part number and measurements whenever possible.
  • Check Both Sides: Some applications use two struts. If one is weak, the other may be worn as well.
  • Mounting Hardware: This listing is for the strut rod. Reuse or verify mounting brackets, ball studs, and related hardware separately.

Features

Stainless Steel Appearance

Clean corrosion-conscious appearance for RV, boat, camper, hatch, and cover applications.

20" Long Gas Spring

Designed for applications requiring a 20" long replacement-style gas spring strut.

8" Stroke Travel

Provides an 8" stroke for compatible lift-support mounting geometry.

20 lb Force Rating

Light-force support for compatible doors, hatches, covers, panels, RVs, boats, and campers.

Included Components

Quantity Item
1 GS8-200-20 stainless steel gas spring strut rod
Not Included Mounting brackets, ball studs, screws, or additional hardware unless shown or stated separately
Important Fitment Note: Verify the 20" length, 8" stroke, 20 lb force rating, 10mm lockable end style, and mounting points before ordering. Application references are for compatibility guidance only.
GS8-200-20 stainless steel gas spring strut rod, 20 inch gas spring, 8 inch stroke gas strut, 20 lb force gas spring, RV hatch strut, camper door gas spring, boat hatch lift support, stainless gas spring rod, SPD replacement style gas strut, 10mm lockable end gas spring.

Related Parts & Kits

Check fitment, measurements, and kit contents before ordering. Related parts may not be required for your repair.
Looking up part numbers in our catalog…
Your repair list1 item selected

Selected products are added together. Review the cart and verify kit contents to prevent duplicates. Prices and discounts are determined at checkout.

BEHIND THIS LISTING
PHOTOGRAPHY & RESEARCH Ariah Granados Ariah’s handwritten signature
DIGITAL PRESENTATION & DEVELOPMENT Ken Martin Ken’s handwritten signature
ONLINE SALES & QUALITY ASSURANCE Rayn Fisher
WE’RE HERE TO HELP

Not sure it fits?

Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.

815-357-3292  ·  270 E Jackson St  ·  Seneca, IL 61360

CUSTOMER REVIEWS

Good people. Real trailer work.

Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.

Leave a Google review
TRAILER PARTSGOOGLE

Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.

Luke HeiserOCT 2026
RV KEYSGOOGLE

Found the correct RV keys at a good price with free shipping; the keys worked as expected.

Vanessa ROCT 2026
AXLE & LEAF SPRINGSGOOGLE

Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.

Cory StrubertOCT 2026
Showing 3 of 50

Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.

R&P Knowledge Hub

Gas Spring Reference

Review this gas spring or compare another SPD / GSNI spring by extended length, family and force rating.

Current Gas Spring
Force
Extended
Compressed
Stroke
Rod / Tube
Compare another gas spring
How to measure a gas spring
EXTENDED LENGTH — CENTER TO CENTER TUBE ROD STROKE

Extended: measure center-to-center with the spring fully extended.

Compressed: measure center-to-center with the spring fully compressed.

Stroke: the distance the rod travels between compressed and extended positions.

Force: match the printed force rating whenever possible.

Reference Match

Force
Extended
Compressed
Stroke
Rod / Tube
Standard End

Reference only: verify the printed product number, force, extended length, compressed length, stroke, rod diameter, tube diameter and end fitting before ordering.