Brophy 7-Way Trailer Plug Holder with Mounting Screws
Surface-mounted holder designed to keep a compatible 7-way blade trailer plug secured, easy to locate, and off the ground while the trailer is disconnected.
Key Measurements & Specs
| Specification | Detail |
|---|---|
| Part Number / SKU | BKP7 |
| Brand | Brophy |
| Product Type | 7-way trailer plug holder |
| Dimensions | 2-3/8" × 5" |
| Color | Black |
| Mounting Style | Surface mount |
| Quantity Included | One holder with two mounting screws |
Fitment / Application
| Category | Details |
|---|---|
| System | Trailer electrical connection storage |
| Primary Fit | Compatible heavy-duty 7-way blade trailer-end plugs |
| Common Applications | Camper, boat, utility and equipment trailers |
| Mounting Location | Suitable flat surface, commonly on the trailer tongue |
| Fitment Method | Confirm plug style, holder dimensions and available mounting space |
Top Features
| Feature | Buyer Benefit |
|---|---|
| Secure Plug Storage | Keeps the disconnected trailer plug from dangling or resting on the ground |
| Connection Protection | Helps protect the plug pins from bending, dirt and loose debris |
| Surface-Mount Design | Installs on an appropriate trailer surface using the included screws |
| 7-Way Blade Fit | Designed to hold a compatible standard 7-way blade trailer plug |
Overview
The Brophy BKP7 provides a designated storage location for a compatible 7-way blade trailer plug when the trailer is disconnected from the tow vehicle. Mounting the holder directly to the trailer helps keep the plug out of the dirt, prevents the wiring from dangling, and makes the connector easier to locate when it is time to hook up again. The listing includes one black plug holder and two mounting screws.
R&P Service Insight
A trailer plug should not be left dragging, resting on the ground or hanging by its wiring. A dedicated holder provides a consistent storage point and reduces unnecessary strain on the plug and cable.
- Choose a protected location: Mount the holder where the plug will remain accessible without interfering with the coupler, jack or safety chains.
- Check cable reach: Make sure the trailer cable reaches the holder without being stretched, sharply bent or pulled tight.
- Inspect before storage: Remove visible dirt or moisture from the connector before placing it in the holder.
R&P Knowledge Hub
Compatibility: Designed for compatible trailer-end 7-way blade plugs. Plug configurations can vary, so compare the existing connector with the holder style before ordering.
Trailer Fit: Commonly used on campers, boat trailers, utility trailers and equipment trailers equipped with a compatible 7-way blade wiring plug.
Installation Notes: Select a flat mounting surface with enough clearance for the holder, plug, wiring cable and included mounting screws.
Protection Insight: Keeping the plug supported and elevated helps reduce contact with dirt and debris while protecting the connector pins from accidental impact.
Brand & Fitment Note
Selling Brand: Brophy
Product Identification: This listing is for Brophy part number BKP7, a black trailer-end plug holder supplied with mounting screws.
What This Means: The holder provides a storage location for a compatible 7-way blade trailer plug. It is not an electrical connector, wiring harness or vehicle socket.
Before Ordering: Verify the plug style, 2-3/8" × 5" holder dimensions, mounting location and available clearance on the trailer.
R&P Repair Insight
Before installation, inspect the existing trailer plug and wiring. A holder can provide secure storage, but damaged pins, cracked plug housings or worn wiring should be repaired separately.
- Confirm connector type: Match the holder to a compatible trailer-end 7-way blade plug.
- Check mounting clearance: Make sure the stored plug will not contact moving coupler, jack or chain components.
- Avoid cable tension: Position the holder so the cable rests naturally without pulling against the plug body.
Features
Protects the Connection
Eliminates a dangling plug and helps prevent the connector pins from bending or collecting dirt and debris.
Outdoor-Ready Construction
Designed for trailer use where the holder may be exposed to outdoor weather and sunlight.
Easy Surface-Mount Installation
Mounts to a suitable flat surface on the trailer using the two included mounting screws.
Compatible 7-Way Blade Fit
Built to securely accommodate a compatible heavy-duty 7-way blade plug used on many campers, boats and utility trailers.
Included Components
| Quantity | Item |
|---|---|
| 1 | Brophy black 7-way trailer plug holder |
| 2 | Mounting screws |
| Not included | Trailer plug, wiring harness and additional installation hardware |
