At a Glance
- SKU: SH2RV5475-KITX2

Two-hub trailer idler hub kit for 3,500 lb axle applications using a 5×4.75 wheel bolt pattern, L68149 inner bearings, L44649 outer bearings, and 10-19 grease seals.
This R&P Carriages trailer hub kit includes two idler hub assemblies for standard 3,500 lb trailer axle applications where the bearing sizes, seal size, spindle dimensions, and 5×4.75 bolt pattern match. Each hub has races pre-installed and is supplied with the listed bearing, seal, and EZ-Lube dust cap components for service replacement or trailer hub rebuild work.
Trailer hubs are fitment-sensitive parts. Matching the bolt pattern is only one step; the bearing numbers, seal dimensions, spindle style, and cap size all need to line up before installation.
Compatibility: For 3,500 lb trailer axle idler hub applications using a 5×4.75 bolt pattern, L68149 inner bearing, L44649 outer bearing, and 10-19 grease seal.
Vehicle / System Fit: Used on compatible trailer idler axle setups, including utility, cargo, boat, and similar trailer applications where all measurements match.
Installation Notes: Confirm the bearing numbers, seal inner and outer diameter, wheel bolt pattern, stud size, dust cap size, and spindle profile before ordering or installing.
Performance Insight: Correct hub fitment helps the wheel, bearings, seal, and spindle work together properly. A mismatch in bearing size, seal size, or bolt pattern can prevent safe installation.
Selling Brand: R&P Carriages
Application Reference: Any axle or trailer application language in this listing describes compatibility style only where the listed bearing sizes, seal size, bolt pattern, stud size, and hub configuration match.
What This Means: This listing is for an R&P Carriages trailer idler hub kit, not a guaranteed OEM-branded item unless specifically stated and verified.
Before Ordering: Verify measurements, bearing numbers, seal dimensions, bolt pattern, stud size, dust cap size, axle configuration, and included components before installation.
When replacing trailer hubs, the most common fitment mistakes are mixing up 5-lug bolt patterns, assuming all 3,500 lb axles use the same seal, or overlooking whether the trailer uses an idler hub or a brake drum hub.
Includes two idler hub assemblies for servicing both sides of a compatible trailer axle setup.
Designed for trailer wheels using the 5×4.75 wheel bolt pattern with 1/2" studs.
Each hub is supplied with races already installed, reducing prep work during hub service.
Includes the listed L44649 outer bearings, L68149 inner bearings, 10-19 seals, and 1.98" EZ-Lube dust caps with rubber inserts.
| Specification | Detail |
|---|---|
| Part Number | SH2RV5475-KITX2 |
| Brand | R&P Carriages |
| Product Type | Pair of trailer idler hubs with bearing and seal components |
| Application | 3,500 lb trailer idler axle applications where specifications match |
| Material / Finish | Not specified |
| Quantity | 2 hubs + 2 bearing/seal kits |
| Axle Rating | 3,500 lb |
| Bolt Pattern | 5×4.75 |
| Stud Size | 1/2" studs |
| Included Bearings Per Hub | L44649 outer bearing, 1-1/16" ID L68149 inner bearing, 1-3/8" ID |
| Seal Per Hub | 10-19 seal, 1.719" x 2.56" |
| Dust Cap Per Hub | 1.98" EZ-Lube dust cap with rubber insert |
| Race Installation | Races pre-installed in hubs |
| Category | Details |
|---|---|
| Vehicle / System | Trailer idler axle hub system |
| Primary Fit | 3,500 lb trailer idler axles using L68149 inner bearings, L44649 outer bearings, and 10-19 seals |
| Secondary Fit | Trailer wheels requiring a 5×4.75 bolt pattern and 1/2" wheel studs |
| Notes | Verify bearing numbers, seal size, spindle dimensions, bolt pattern, stud size, and cap size before ordering. This is an idler hub kit and is not for brake drum hub applications. |
| Quantity | Item |
|---|---|
| 2 | Trailer idler hub assemblies with races pre-installed |
| 2 | L44649 outer bearings, 1-1/16" ID |
| 2 | L68149 inner bearings, 1-3/8" ID |
| 2 | 10-19 grease seals, 1.719" x 2.56" |
| 2 | 1.98" EZ-Lube dust caps with rubber inserts |
Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.
815-357-3292 · 270 E Jackson St · Seneca, IL 61360
Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.
Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.
Found the correct RV keys at a good price with free shipping; the keys worked as expected.
Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.
Praised the OEM and aftermarket selection, discounts, quick shipping, and friendly parts staff.
Got the axle he needed right away, set up with a custom spring perch.
Praised the polite staff and quality welding on a project.
Replacement struts brought a long-used door back to working order.
Had a trailer built to his needs at a fair price, then found parts for two other trailers in stock.
Praised the customer service after working with R&P over several years.
Found the gas shock he wanted at a good price with shipping included.
Received swivel D-rings with backing plates and praised the price, correct order, and service.
The right parts arrived the first time, with fast delivery and helpful staff.
Said project advice and prompt shipping helped finish a trailer project.
Reported helpful service and fast shipment to Germany.
Praised a suspension kit, fair pricing, and good parts.
Was pleased with a replacement trailer cord.
Noted dependable service and products across repeat visits.
Said the axle installation fit perfectly and thanked Josh and the crew.
Praised the crew’s professionalism during a difficult hitch replacement.
Liked the product, price, communication, and shipping.
Said the product description explained what would work for the trailer.
Received the item as described with very fast shipping and plans to return.
Praised accurate description, quick shipping, and clear communication.
Was happy with the product and its price.
Called it a pleasure doing business with R&P.
Was pleased with product quality, quick delivery, and an easy installation.
Was enthusiastic about the products.
Was ready to install the product on every trailer they own.
Expected to buy again after a good experience.
Reported that the newly installed parts were working perfectly.
Said things went well, as they had on previous visits.
Praised clear communication and fair value.
Said the transaction went as expected.
Noted good value, careful packing, and fast shipping.
Found the team professional and easy to work with.
Praised fast shipping and good communication.
Shared appreciation for the owners and their company.
Reported prompt shipping and said they would buy again.
Found R&P easy to deal with.
Praised the people and the service.
Reported a good fit, fair price, accurate listing, and quick shipping.
Received the order a day early and recommended the seller.
Described a no-hassle, professional custom-trailer purchase.
Praised a new trailer, custom additions, helpful staff, and clear pricing.
Found the right hub covers quickly and got helpful maintenance advice.
Said R&P helped their company get back on the road after an axle problem.
Was happy with a dump-trailer purchase after comparing options.
Received clear help choosing brake assemblies and bearing seals, followed by fast shipping.
Found a good deal on a 16-foot dump trailer and planned to return.
Thanked the staff for their patience and recommended the shop.
Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.
Check specifications and fitment before ordering. These items are not a guarantee of compatibility.
Shopify recommendations are for discovery; confirm fitment and specifications before purchase.