At a Glance
- SKU: 013-142-02

Long curved equalizer for spread-axle trailer suspension systems using 1-3/4" wide double-eye leaf springs. Commonly used for 42" axle-center layouts where the original equalizer measurements match.
| Specification | Detail |
|---|---|
| Part Number / SKU | 013-142-02 |
| Brand | Dexter |
| Product Type | Long spread axle suspension equalizer |
| Outer Hole Centers | 14-3/4" center-to-center |
| Height / Center Offset | 2-1/2" listed height / offset |
| Bolt Hole Diameter | 9/16" holes |
| Spring Width | For 1-3/4" wide double-eye leaf springs |
| Material / Finish | Cast equalizer, black finish, nylon bushings |
| Quantity Included | 1 equalizer |
| Category | Details |
|---|---|
| Trailer System | Tandem trailer suspension systems with double-eye leaf springs |
| Primary Fit | Spread axle layouts using approximately 42" axle centers |
| Spring Type | 1-3/4" wide double-eye leaf springs with 9/16" spring-eye hardware |
| Fitment Method | Match the original equalizer by outer hole spacing, height / offset, spring width, and bolt diameter |
| Important Note | Verify all suspension measurements before ordering. Hardware, hangers, shackles, and bolts are not included. |
| Feature | Buyer Benefit |
|---|---|
| Extra-Long Geometry | Built for spread axle suspension layouts with longer axle spacing than standard tandem setups. |
| 14-3/4" Hole Centers | Provides the key outer bolt spacing needed for matching the existing equalizer. |
| 9/16" Bolt Holes | Matches common double-eye spring suspension hardware dimensions. |
| Equalizer Only | Clean replacement component for buyers reusing or separately sourcing hangers, bolts, shackles, and nuts. |
The Dexter 013-142-02 is an extra-long spread axle equalizer for trailer suspension systems using 1-3/4" wide double-eye leaf springs. It is designed around 14-3/4" outer bolt centers, 9/16" bolt holes, and a listed 2-1/2" height / center offset. Use this equalizer only where the original suspension geometry and measurements match.
Equalizers are geometry-critical suspension parts. A small difference in hole spacing or height can change shackle angle, spring movement, axle spacing, and tire clearance.
Compatibility: Built for spread axle suspension layouts using 1-3/4" wide double-eye leaf springs, 9/16" suspension hardware, and a 14-3/4" outer hole center measurement.
Vehicle / System Fit: Commonly used on tandem trailer suspension systems with approximately 42" axle centers where the original equalizer dimensions match.
Installation Notes: Verify equalizer length, height / offset, hanger spacing, spring length, bolt diameter, bushing condition, and shackle angle before installation.
Performance Insight: The equalizer allows controlled movement between axles so the suspension can transfer load and road shock across the spring system. Matching the correct geometry helps maintain proper ride height, axle spacing, and suspension travel.
Selling Brand: Dexter
Application Reference: Dexter part number 013-142-02 is used as the application and identification reference for this spread axle equalizer.
What This Means: This listing is for one Dexter spread axle equalizer, not a full suspension kit.
Before Ordering: Verify your original equalizer measurements, spring width, bolt hole diameter, axle spacing, hanger layout, and included components before installation.
When replacing an equalizer, inspect the surrounding suspension hardware at the same time. Worn bolts, bushings, shackles, and hangers can create movement that looks like equalizer failure but is actually hardware wear.
Designed for longer axle-center layouts commonly used in spread axle trailer suspension systems.
Outer bolt hole spacing matches applications requiring a 14-3/4" long equalizer layout.
All listed bolt positions use 9/16" holes for compatible double-eye spring suspension hardware.
Intended for trailer suspension systems using 1-3/4" wide double-eye leaf springs.
| Quantity | Item |
|---|---|
| 1 | Dexter 013-142-02 extra long spread axle equalizer |
| Not Included | Mounting bolts, wet bolts, lock nuts, shackle straps, spring hangers, springs, and other suspension hardware |
Have your SKU or manufacturer part number, photos of the original part and mounting, and any critical measurements ready. Capacity, voltage, or bolt pattern can help too.
815-357-3292 · 270 E Jackson St · Seneca, IL 61360
Customer feedback summarized from Google and Yellow Pages. Dates are shown where available.
Ordered trailer repair parts repeatedly; praised fast service, careful packing, and accurate orders.
Found the correct RV keys at a good price with free shipping; the keys worked as expected.
Needed an unusual axle and leaf-spring size; the team listened and helped him sort out the fit.
Praised the OEM and aftermarket selection, discounts, quick shipping, and friendly parts staff.
Got the axle he needed right away, set up with a custom spring perch.
Praised the polite staff and quality welding on a project.
Replacement struts brought a long-used door back to working order.
Had a trailer built to his needs at a fair price, then found parts for two other trailers in stock.
Praised the customer service after working with R&P over several years.
Found the gas shock he wanted at a good price with shipping included.
Received swivel D-rings with backing plates and praised the price, correct order, and service.
The right parts arrived the first time, with fast delivery and helpful staff.
Said project advice and prompt shipping helped finish a trailer project.
Reported helpful service and fast shipment to Germany.
Praised a suspension kit, fair pricing, and good parts.
Was pleased with a replacement trailer cord.
Noted dependable service and products across repeat visits.
Said the axle installation fit perfectly and thanked Josh and the crew.
Praised the crew’s professionalism during a difficult hitch replacement.
Liked the product, price, communication, and shipping.
Said the product description explained what would work for the trailer.
Received the item as described with very fast shipping and plans to return.
Praised accurate description, quick shipping, and clear communication.
Was happy with the product and its price.
Called it a pleasure doing business with R&P.
Was pleased with product quality, quick delivery, and an easy installation.
Was enthusiastic about the products.
Was ready to install the product on every trailer they own.
Expected to buy again after a good experience.
Reported that the newly installed parts were working perfectly.
Said things went well, as they had on previous visits.
Praised clear communication and fair value.
Said the transaction went as expected.
Noted good value, careful packing, and fast shipping.
Found the team professional and easy to work with.
Praised fast shipping and good communication.
Shared appreciation for the owners and their company.
Reported prompt shipping and said they would buy again.
Found R&P easy to deal with.
Praised the people and the service.
Reported a good fit, fair price, accurate listing, and quick shipping.
Received the order a day early and recommended the seller.
Described a no-hassle, professional custom-trailer purchase.
Praised a new trailer, custom additions, helpful staff, and clear pricing.
Found the right hub covers quickly and got helpful maintenance advice.
Said R&P helped their company get back on the road after an axle problem.
Was happy with a dump-trailer purchase after comparing options.
Received clear help choosing brake assemblies and bearing seals, followed by fast shipping.
Found a good deal on a 16-foot dump trailer and planned to return.
Thanked the staff for their patience and recommended the shop.
Need help with this part? Send photos, part numbers, and measurements. We’ll help you narrow it down.
Check specifications and fitment before ordering. These items are not a guarantee of compatibility.
Shopify recommendations are for discovery; confirm fitment and specifications before purchase.